Solar energy stands as one of the most promising green energy sources today. This paper proposes a symmetrical gap-type separated solar absorber and radiator (SETR) featuring a dielectric layer of Al₂O₃ and metal W as separation columns. Its unique structure enhances absorption within the effective solar energy spectrum, thereby alleviating solar energy absorption challenges. The finite difference time domain method (FDTD) results show that the SETR achieves an absorption rate of more than 90% in the 280–2096 nm band, which perfectly covers the visible light band range. The weighted average absorption in the 280–2500 nm band is 95.22% under AM1.5 conditions. The thermal emission efficiency at 1500 K is 95.13%, and the thermal radiation loss is less than 5%. Beyond analyzing the results, we also investigated the overall band absorption efficiency of the SETR under varying conditions by adjusting its structural parameters and physical parameters such as materials. This approach enables effective control over the absorption spectrum. Additionally, the proposed SETR is independent of polarization conditions. Both the TM and TE modes are insensitive to large incident angles. In the future, broadband SETRs can be applied to solar energy harvesting, thermoelectric conversion, and imaging fields, as it holds broad application prospects.

In this paper, multi-band bandstop filters (BSFs) based on mixed electric and magnetic coupling resonators are proposed. These proposed structures include a multimode resonator based on symmetrical open-circuit branches, including upper- and lower-branch filter circuits. Through this design, the center frequencies of the stopbands can be flexibly and autonomously adjusted. In addition, the filters proposed in this paper have excellent characteristics, such as miniature dimensions and abrupt roll-off skirts. Finally, these tri-band to sext-band bandstop filters were fabricated and the measured results agreed well with the simulated ones. The proposed structures can be applied in the fields of communication, information, and coal automation.

With the continuous advancement of the “dual-carbon” strategy, the penetration of renewable energy sources such as wind and photovoltaic (PV) power has steadily increased, imposing more stringent requirements on the safe and stable operation of modern power systems. As the core components of these systems, critical electrical devices operate under harsh conditions characterized by high voltage, strong electromagnetic interference (EMI), and confined high-temperature environments. Their operating status directly affects the reliability of the power supply, and any fault may trigger cascading failures, resulting in significant economic losses. To address the issues of low inspection efficiency, limited fault-identification accuracy, and unstable data transmission in strong-EMI environments, this study proposes an intelligent inspection system for power equipment based on multi-technology integration. The system incorporates a redundant dual-mode wireless transmission architecture combining Wireless Fidelity (Wi-Fi) and Fourth Generation (4G) cellular communication, ensuring reliable data transfer through adaptive link switching and anti-interference optimization. A You Only Look Once version 8 (YOLOv8) object-detection algorithm integrated with Open Source Computer Vision (OpenCV) techniques enables precise visual fault identification. Furthermore, a multi-source data-fusion strategy enhances diagnostic accuracy, while a dedicated monitoring scheme is developed for the water-cooling subsystem to simultaneously assess cooling performance and fault conditions. Experimental validation demonstrates that the proposed system achieves a fault-diagnosis accuracy exceeding 95.5%, effectively meeting the requirements of intelligent inspection in modern power systems and providing robust technical support for the operation and maintenance of critical electrical equipment.

The main purpose of this article is to investigate the dynamic behavior and optical soliton for the M-truncated fractional paraxial wave equation arising in a liquid crystal model, which is usually used to design camera lenses for high-quality photography. The traveling wave transformation is applied to the M-truncated fractional paraxial wave equation. Moreover, a two-dimensional dynamical system and its disturbance system are obtained. The phase portraits of the two-dimensional dynamic system and Poincaré sections and a bifurcation portrait of its perturbation system are drawn. The obtained three-dimensional graphs of soliton solutions, two-dimensional graphs of soliton solutions, and contour graphs of the M-truncated fractional paraxial wave equation arising in a liquid crystal model are drawn.

In this paper, the operating mechanism of proposed bandpass filters with a single multimode resonator loaded with branches is introduced. Based on the design procedure, the center frequencies of the proposed bandpass filters can be controlled due to the design freedom. Meanwhile, the proposed bandpass filters (BPFs) feature compact sizes and small insertion loss. To validate the design and analysis, a prototype was fabricated and measured with six passbands centered at 1.23/1.76/2.38/4.24/5.23/6.75 GHz. The measured result of the fabricated filter agrees well with the simulation, which indicates that the proposed structure can serve as a potential candidate for multiband BPF designs.