Amanda Alcaide Francisco Fukumoto

Dr. Amanda Alcaide Francisco Fukumoto

University Federal of Mato Grosso, Cuiabá, Mato Grosso, Brazil
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 March 2023 in Water
Verified
Journal Article
Open access
PDF file
TRThais Ribeiro
Thais Ribeiro
FJFellipe Jhordã Ladeia Janz
Fellipe Jhordã Ladeia Janz
DVDandley Vizibelli
Dandley Vizibelli
JBJulio Cesar Angelo Borges
Julio Cesar Angelo Borges
JBJoelmir André Borssoi
Joelmir André Borssoi
EPEdilaine Regina Pereira
Edilaine Regina Pereira
The plastic recycling industry generates a high volume of wastewaters. In this study, an unprecedented use of Moringa oleifera and tannin (Acacia mearnsii bark) associated with magnetite was proposed for the treatment of these wastewaters. The response surface method (RSM) and central composite rotational design (CCRD) methodology was applied to optimize the influence of operational variables (pH, temperature, electrical conductivity, turbidity, apparent color, chemical oxygen demand (COD), and total solids) on the performance of the magnetic natural coagulants on coagulation, flocculation, and sedimentation process. The results indicated that temperature, pH, electrical conductivity, and total solids did not generate significant differences in treatments when magnetite was added to natural coagulants. Similarly, the parameters apparent color, turbidity, and COD also did not present significant differences in treatments with Moringa oleifera and magnetite association, although achieving high efficiencies. Finally, the addition of magnetite significantly improved tannin efficiency removal for turbidity, apparent color, and COD with the optimized treatment (21.55 mg L−1 of tannin concentration and 28 min of sedimentation). Thus, natural coagulants associated with magnetite are potential alternatives for the treatment of plastic recycling wastewater and could be used as an environmentally friendly coagulant.

3 December 2020 in Environmental Technology
Verified
Journal Article
Closed access
JPJosé Augusto Alves Pimenta
José Augusto Alves Pimenta
AFAmanda Alcaide Francisco Fukumoto
Amanda Alcaide Francisco Fukumoto
TMTiago Bervelieri Madeira
Tiago Bervelieri Madeira
MMManoel Orlando Alvarez Mendez
Manoel Orlando Alvarez Mendez
SNSuzana Lucy Nixdorf
Suzana Lucy Nixdorf
EKEmília Kiyomi Kuroda
Emília Kiyomi Kuroda
Pesticides present in water resources can cause adverse health effects even in low concentrations, due to their bio-accumulative character. Therefore, the challenge for drinking water production increases, due to the limitations of conventional water treatment technologies in the removal of small molecular weight dissolved compounds. This work aimed to provide technical and scientific support for the selection of pulverized activated carbon – PACs, granular activated carbon – GACs, and carbon nanotubes – CNT concerning atrazine – ATZ, simazine – SMZ, and diuron – DIU adsorption for application in water treatment plants, considering two forms of application commercial product – CP and analytical standard – SD. These forms of application were tested aiming to verify the influence of the purity of the products used in experiments on the adsorption efficiency. It was possible to verify the adsorption efficiencies were not guided only by the characteristics of the adsorptive materials used, and that the selection should not be carried out only based on the, specific superficial area – BET size and distribution of specific pore volume. The isotherms demonstrated that the parameter Kf associated with the results of the selection experiment can be considered an alternative technical tool of simple application and sufficient for this purpose. Also, the capacity of activated carbons – ACs and nanomaterials – NMs were affected by the application of the compounds, highlighting the importance of using commercial product – CP in scientific research and technical investigations. GRAPHICAL ABSTRACT

22 August 2022 in Environmental Technology
Verified
Journal Article
Closed access
AFAmanda Alcaide Francisco Fukumoto
Amanda Alcaide Francisco Fukumoto
JPJosé Augusto Alves Pimenta
José Augusto Alves Pimenta
EHElisa Yoko Hirooka
Elisa Yoko Hirooka
EKEmília Kiyomi Kuroda
Emília Kiyomi Kuroda
The conventional water treatment technique (CT) widely applied cannot alone remove pesticides efficiently from water. Therefore, this work aimed to provide technical and scientific support for the association of pulverized activated carbon (PACs), granular activated carbon (GACs), and carbon nanotubes (CNT) with CT concerning atrazine (ATZ), simazine (SMZ), and diuron (DIU) removal. Actual conditions of pre/during, and post-treatment points of application, within water production process line, in water treatment plants (WTPs), using the pesticides in two forms, commercial product (CP) and analytical standard (SD). It was possible to demonstrate significant differences regarding the removal of ATZ, SMZ, and DIU in their SD and CP forms for the PACs, GACs, and CNTs. The minimum dosage of CNT required for adequate adsorption of all pesticides was superior to 160 mg. L−1; is 400% higher than the minimum dosage of 40 mg. L−1 is required for PAC application. ATZ, SMZ, and DIU in the SD form were more efficiently removed with percentages superior to 96.4% for ATZ, 98.2% for SMZ, and 99.1% for DIU. The characteristics of the adsorptive materials did not guide the adsorption efficacy. Instead, chemical interaction, contact time, and point application were critical factors. The pre-treatment and post-treatment applications were the most efficient, with removals oscillating from 97.7% to 100% for ATZ, 97.7% to 100% for SMZ, and 99.1 to 100% for DIU PAC and GAC, respectively. GRAPHICAL ABSTRACT

1 April 2019 in Engenharia Sanitaria e Ambiental
Verified
Journal Article
Open access
PDF file
AFAmanda Alcaide Francisco Fukumoto
Amanda Alcaide Francisco Fukumoto
EKEmília Kiyomi Kuroda
Emília Kiyomi Kuroda
A presença das cianobactérias é uma das grandes preocupações para o tratamento de água, uma vez que esses microrganismos podem ser produtores de metabólitos tóxicos, como as microcistinas (MCs), que não são efetivamente removidas no tratamento usualmente empregado de ciclo completo. Para a remoção dessas toxinas, pode-se, de forma complementar, utilizar adsorvedores como o carvão ativado (CA), que apresenta eficiência variada, em função de suas características. Este trabalho teve como objetivo fornecer subsídios técnicos e científicos para a seleção de carvões ativados pulverizados (CAPs) e carvões ativados granulares (CAGs) como adsorvedores de MCs. Para tanto, foi realizado, primeiramente, um experimento de seleção de CAs com maior capacidade adsortiva para MCs, em escala de bancada. Em seguida, para os CAPs e CAGs selecionados, foi realizada caracterização complementar para a distribuição de volume específico em função do tamanho do poro. Posteriormente, foram elaboradas isotermas de adsorção de Freundlich e curvas de ruptura. Pôde-se constatar que, dentre os CAs amostrados, os importados apresentaram maior capacidade adsortiva para MCs do que os nacionais. Além disso, foi possível concluir que a escolha do CA pode ser determinada pelos parâmetros índice de azul de metileno (IAM), volume de mesoporos e coeficiente Kf, associados aos resultados do experimento de seleção, considerado uma ferramenta técnica alternativa de simples aplicação e suficiente para esse fim.

8 November 2025 in Desalination and Water Treatment
Verified
Journal Article
Open access
VCVinícius Reis Cargnelutti
Vinícius Reis Cargnelutti
RGRossean Golin
Rossean Golin
AFAmanda Alcaide Francisco Fukumoto
Amanda Alcaide Francisco Fukumoto
ICIbraim Fantin da Cruz
Ibraim Fantin da Cruz
FFFrederico Carlos Martins de Menezes Filho
Frederico Carlos Martins de Menezes Filho
EMEduardo Beraldo de Morais
Eduardo Beraldo de Morais

19 August 2024 in Nativa
Verified
Journal Article
Open access
PDF file
ABAline Gonçalves Barbosa
Aline Gonçalves Barbosa
TMTairine Fernanda da Silva Magalhães
Tairine Fernanda da Silva Magalhães
RGRossean Golin
Rossean Golin
Heiriane Martins SousaHeiriane Martins Sousa
Heiriane Martins Sousa
AFAmanda Alcaide Francisco Fukumoto
Amanda Alcaide Francisco Fukumoto
EMEduardo Beraldo de Morais
Eduardo Beraldo de Morais
Neste estudo, biocarvão derivado de resíduos do beneficiamento do algodão (BCA) foi aplicado para a remoção de cafeína de água por meio da adsorção. A influência do pH inicial da solução (3, 5, 7 e 10), concentração de cafeína (25-200 mg L-1), temperatura (30, 40 e 50 °C) e tempo de contato (0-120 min) foram avaliados. Estudos cinéticos e de equilíbrio mostraram que os dados tiveram melhor ajuste pelos modelos de pseudossegunda ordem e modelo de isoterma de Langmuir, respectivamente. A capacidade máxima de adsorção da cafeína pelo BCA foi estimada em 70,42 mg g-1. A energia livre de ativação estimada pela isoterma de Dubinin-Radushkevich foi de 7,071 kJ mol-1, indicando que a adsorção da cafeína pelo BCA se deu por um processo físico. O estudo termodinâmico apontou que a adsorção é de natureza endotérmica (ΔH > 0) e não-espontânea (ΔG > 0). A morfologia e grupos funcionais do BCA também foram caracterizados usando as técnicas de MEV e ATR-FTIR, respectivamente. O BCA apresentou estrutura porosa e os principais mecanismos envolvidos na adsorção da cafeína são ligação de hidrogênio, interação π-π e atração eletrostática. O BCA possui potencial para a remoção de cafeína de água. Palavras-chave: cinética; modelos de isotermas; estudo termodinâmico; mecanismos de adsorção. Caffeine adsorption in aqueous solution by biochar derived from cotton processing waste In this study, biochar derived from cotton processing waste (BCA) was applied for caffeine removal from water through adsorption. The influence of initial solution pH (3, 5, 7, 10), caffeine concentration (25-200 mg L-1), temperature (30, 40, 50 °C), and contact time (0-120 min) were evaluated. Kinetic and equilibrium studies showed that the data were better fitted by the pseudo-second-order model and Langmuir isotherm model, respectively. The maximum caffeine adsorption capacity by BCA was estimated at 70.42 mg g-1. The activation energy estimated by the Dubinin-Radushkevich isotherm was 7.071 kJ mol-1, indicating that caffeine adsorption by BCA occurred through a physical process. The thermodynamic study indicated that the adsorption is of endothermic nature (ΔH > 0) and non-spontaneous (ΔG > 0). The morphology and functional groups of BCA were also characterized using scanning electron microscopy (SEM) and attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR), respectively. BCA exhibited a porous structure, and the main mechanisms involved in caffeine adsorption were hydrogen bonding, π-π interaction, and electrostatic attraction. BCA shows potential for caffeine removal from water. Keywords: kinetic; isotherms models; thermodynamic studies; adsorption mechanisms.