With the demand for construction of lightweight ships and polar ships, high-strength steel is increasingly applied in shipbuilding. There are a large number of complex curved plates to be processed in ship construction. The main method for forming a complex curved plate is line heating. A saddle plate is an important type of double-curved plate, which affects the resistance performance of the ship. The existing research on high-strength-steel saddle plates is lacking. To solve the problem of forming for high-strength-steel saddle plates, the numerical calculation of line heating for a EH36 steel saddle plate was studied. By combining it with a line heating experiment of low-carbon-steel saddle plates, the feasibility of numerical calculation based on the thermal elastic–plastic theory for high-strength-steel saddle plates was verified. Under the premise that the processing conditions such as the material parameters, heat transfer parameters, and the constraint mode of the plate were correctly designed, the effects of the influencing factors on deformation of the saddle plate could be studied by the numerical calculation method. The numerical calculation model of line heating for high-strength-steel saddle plates was established, and the effects of geometric parameters and forming parameters on shrinkage and deflection were studied. This research can provide ideas for the lightweight construction of ships and provide data support for automatic processing of curved plates. It can also provide inspiration for curved plate forming in fields such as aerospace manufacturing, the automotive industry, and architecture.
12 March 2021 in Journal of Marine Science and Technology
The application of titanium alloy in shipbuilding can reduce ship weight and carbon emissions. To solve the problem of titanium alloy forming, the deformation prediction of titanium alloy line heating based on a backpropagation (BP) neural network and sparrow search algorithm (SSA) was researched. Based on the thermal–elastic–plastic finite element method, the numerical calculation model of TA5 titanium alloy overlapping heating forming was established. The feasibility of the model was verified by comparing it with the numerical calculation and experiment of low-carbon steel. Considering the characteristics of the titanium alloy-forming process, 73 groups of titanium alloy-forming schemes were obtained by the Latin hypercube sampling method. The deformation data of the samples were obtained by using the numerical calculation model of titanium alloy forming. The prediction methods of titanium alloy-forming deformation based on BP, genetic algorithm–backpropagation (GA-BP), and SSA-BP were proposed. The accuracy of different neural network prediction models was analyzed. The mean absolute percentage errors (MAPEs) of BP, GA-BP, and SSA-BP in shrinkage prediction were 7.45%, 4.08%, and 2.96%, respectively. The MAPEs of BP, GA-BP, and SSA-BP in deflection prediction were 8.44%, 4.73%, and 2.64%, respectively. The goodness of fit (R2) of SSA-BP is closest to 1 among the three models. The calculation results show that SSA-BP is better than BP and GA-BP in predicting the forming deformation of titanium alloy. The maximum prediction error of SSA-BP is 4.95%, which is within the allowable range of engineering error. The SSA-BP prediction model is suitable for the rapid and accurate prediction of the deformation of titanium alloy line heating forming. The intelligent prediction model provides data support for intelligent decisions for titanium alloy forming.
Nowadays in most shipyards, line heating techniques are widely used in the forming process of hull plates. The precision and efficiency of the process are greatly influenced by the determination of technical parameters, including heating length, heating velocity, and the arrangement of heating line. Previous studies on this, which considered only local shrinkage, produced large errors in the calculation of thick and large curvature plates because the whole deformation was ignored. In this article, new mathematical formulas are proposed to indicate the relationship between the whole deflection and shrinkage during the plate-forming process by line heating. The numerical models were established based on the thermoelastic plastic finite element method considering the deflection. The reliability of the numerical models was verified by the comparison of temperature fields and displacement. Based on the analysis of forming regularity, a new concept named influence factor of deflection (IFD) was proposed from the analysis between deflection and shrinkage. The formulas were derived, which establishes the relation between the IFD and technical parameters. Finally, the experimental results showed that the relative percentage error is 5.13% for IFD, and the forming formulas were verified. The research lays a foundation for the technique of parameter prediction of thick and big curvature plates considering the deflection.