Dimension changes on the order of 0.1% or above in response to an applied voltage have been reported for many types of materials, including ceramics, polymers, and carbon nanostructures, but not, so far, for metals. We show that reversible strain amplitudes comparable to those of commercial piezoceramics can be induced in metals by introducing a continuous network of nanometer-sized pores with a high surface area and by controlling the surface electronic charge density through an applied potential relative to an electrolyte impregnating the pores.
We report a macroscopic shrinkage by up to 30 vol % during electrochemical dealloying of Ag-Au. Since the original crystal lattice is maintained during the process, we suggest that the formation of nanoporous gold in our experiments is accompanied by the creation of a large number of lattice defects and by local plastic deformation.
The mechanical properties of nanoporous Au have been investigated by uniaxial compression. Micron-sized columns were machined in the surface of nanoporous Au using a focused beam and compressed with a flat punch in a nanoindenter. Using scaling laws for foams, the yield strength of the diameter ligaments is estimated to be , close to the theoretical strength of Au. This value agrees well with extrapolations of the yield strength of submicron, fully dense gold columns and shows that in addition to foam density and structure, the absolute size of ligaments and cell walls can be used to tailor foam properties.