In this paper, a load torque observer and two moment of inertia identification methods are developed for permanent magnet synchronous motor (PMSM) drive systems. First, the load torque identification method is proposed based on sliding mode observer (SMO), in which the mismatches of moment of inertia, electromagnetic torque and viscous friction are all considered. It is analyzed that the chattering phenomenon will be well weakened if appropriate observer parameters are chosen. Second, based on the property that the mismatch of the moment of inertia will cause the load torque observation error, two types of moment of inertia identification methods, called direct calculation (DC) method and proportional integral (PI) regulator method, are presented to identify the moment of inertia. In addition, the identification errors of the DC and PI regulator methods are also analyzed theoretically. Simulation and experimental results show that compared with the conventional identification method of the moment of inertia, the proposed DC and PI methods both have improved estimation accuracy. Moreover, the presented load torque observer also has high observation precision and fast convergence speed.
14 September 2022 in IEEE Transactions on Transportation Electrification
Precise electrical parameters play important roles in the high-performance control of permanent magnet synchronous machines (PMSMs). This paper proposes a novel parameter and voltage source inverter (VSI) nonlinearity hybrid estimation method to accurately estimate stator resistance, dq -axis inductances, permanent magnet flux linkage, and VSI nonlinearity, in which the effects of magnetic saturation, cross-saturation, and temperature are all considered. The proposed hybrid estimation method consists of two parts: offline and online estimation. In the offline estimation, the four electrical parameters are successively identified by setting different operating conditions, and the identification results are stored in nonvolatile memory in tabular form. In the online estimation, the VSI nonlinearity and the compensation terms of stator resistance and permanent magnet flux linkage related to factors such as temperature and frequency are simultaneously identified by using the recursive least square (RLS) algorithm. Experimental results on a 300 kW PMSM drive system demonstrate that compared to the results achieved with the existing method, the proposed scheme achieves higher estimation accuracy. Consequently, the control performance of the system, such as the output current quality, is efficiently improved.
29 January 2021 in IEEE Transactions on Power Electronics
High-frequency (HF) pulsating carrier voltage injection method is widely used in position sensorless control of permanent magnet synchronous motor. In this method, the position error signal (i.e., amplitude of q-axis HF carrier current) is extracted by band-pass filter (BPF) and low-pass filter (LPF). However, with the BPF+LPF-based position error signal extraction strategy, position estimation loop may face the problem of conflict between filtering accuracy and dynamic performance. The conflict is reflected as estimated speed harmonic or position estimation error cannot be balanced at the same time, especially in speed step and load change condition. In this article, an improved position error signal extraction strategy based on amplitude observer (AO) is proposed. First, the AO-based strategy demodulates q-axis current directly, which gets rid of the BPF. Second, the AO has the capability of automatic secondary HF harmonic filtering, so the LPF is eliminated as well. Third, the AO extracts the position error signal by closed-loop, which helps to improve the extraction performance under dynamic condition. With the AO-based position error signal extraction strategy, the position estimation loop features both high filtering capability and wide bandwidth. Experimental results demonstrate that compared with BPF+LPF-based strategy, the secondary HF harmonic components of estimated speed are eliminated and the position estimation error is decreased at the same time.
12 August 2020 in IEEE Transactions on Transportation Electrification
In the vessel integrated power system (IPS), several common events, such like replacement of the aging batteries, isolation of fault modules, and launching of pulse loads, can make the state-of-charge (SOC) of energy storage elements (ESE) inconsistent, which consequently requires different charging or discharging power command for the ESEs to balance their SOC. Modular multilevel converter õbidirectional DC-DC converter (MMC-BDC) can be utilized in the vessel IPS to connect ESEs with the medium voltage (MV) bus for its outstanding characteristics. However, the degree of imbalance in the module power of MMC-BDC is limited inherently, which can destabilize the system but is usually neglected by the researchers. Therefore, this paper investigates into the unbalanced operating principle of a cascaded MMC-BDC. The imbalance boundary is studied. A control strategy is designed for the unbalanced operation to optimize the voltage stress of the components. A method of allocating unbalanced module power to the sub-modules (SM) is raised on the basis of imbalance boundary. And a novel fast balancing charging strategy is proposed consequently. Finally, the proposed theory and strategies are verified through simulation and a 7.2kW prototype.
21 October 2016 in IEEE Journal of Emerging and Selected Topics in Power Electronics
A three-phase three-level phase-shifted pulsewidth modulation (PSPWM) dc-dc converter is proposed for electric ship medium-voltage direct current application. Output voltage is controlled by incorporating PSPWM. Gate signals of each phase are phase shifted by 2π/3 from each other. This results in a decrease in output voltage ripple. Major features of the converter include: 1) good dynamic performance under low switching frequency; 2) fault tolerance capability; and 3) plug and play capability. In order to obtain behavioral and performance characteristics of the proposed converter, detailed analytical and hardware in loop simulation studies are carried out. Finally, the viability of the scheme is confirmed through detailed experimental studies on a MW level, 1-kHz prototype developed for the purpose.
In high‐performance field‐oriented control of permanent magnet synchronous machines (PMSMs), an accurate rotor position is indispensable for the key roles in coordinate transformations. However, due to the rotor position offset error and the time delay in digital control systems, it is still challenging to obtain exact rotor position information. In this study, the influence of rotor position error on the control performance of a PMSM drive system is analysed first. Then, two novel compensation technologies, regulation and methods, are proposed to accurately compensate for the rotor position for both current and voltage coordinate transformations. The advantage of the proposed scheme is that even without any prior knowledge of the system delay, the rotor position offset and compensation time coefficients can also be precisely calculated. Parameter sensitivity analysis is carried out, and compensation criteria are also provided to improve the compensation accuracy. Experimental results on a 300 kW PMSM drive system demonstrate that compared to the results achieved with conventional methods, the compensation accuracies of the phase angles used for the current and voltage coordinate transformations are increased by and at 5000 r/min, respectively. Consequently, the control performance and stability margin of the system are efficiently improved.