The recent global upsurge in anthropogenic activities has resulted in a decline in the quality of water. This by extension has resulted in increased ubiquity of water pollution in terms of sources. The application of traditional water quality assessment methods usually involves the use of conventional water quality parameters and guideline values. This may be associated with bias and errors during the computation of various sub-indices. Hence, to overcome this limitation, it is critical to have a visual appraisal of the water quality in terms of source and human health risks exposure for sustainable water resource management and informed decision-making. Therefore, the present study has integrated multiple water quality assessment indices, spatio-temporal, and statistical models to assess the suitability of fifty groundwater samples (n = 50) within the Firozabad industrial area for irrigation and drinking; as well as the likely health risks from oral intake and dermal contact by inhabitants. Electrical conductivity (mean = 1,576.6 μs/cm), total hardness (mean = 230.9 mg/L), dissolved sodium (mean = 305.1 mg/L) chloride (mean = 306.1 mg/L) and fluoride (mean = 1.52 mg/L) occurred in the water at concentrations above the recommended standards; attributed influxes from agricultural and industrial wastewater. The pollution index of groundwater and water quality index revealed that 100% of the groundwater samples are extremely polluted; this was also supported by the joint multivariate statistical analyses. The majority of the irrigational water quality indices (sodium adsorption ratio, Kelly’s Ratio, permeability index, percent sodium) revealed that the long-term use of the groundwater for irrigation in the area will result in reduced crop yield unless remedial measures are put in place. Higher Hazard index (HI > 1) for nitrate and fluoride ingestion was recorded in water for the children population compared to adult; an indication that the children population is more predisposed to health risks from the oral intake of water. Generally, risk levels from ingestion appear to increase in the western and north-eastern parts of the study area. From the findings of this study, it is highly recommended that adequate agricultural practices, land use, and water treatment regulatory strategies be put in place for water quality sustainability for enhanced agricultural production and human health protection.

Soil fertility (SF) assessment is an important strategy for identifying agriculturally productive lands, particularly in areas that are vulnerable to climate change. This research focuses on detecting SF zones in Firozabad district, Uttar Pradesh, India, for agricultural purposes, so that they can be prioritized for future management using the fuzzy technique in the Arc GIS model-builder. The model computing technique was also deployed to determine the different fertility zones, considering 17 soil parameters. The derived fuzzy technique outperformed the traditional method of dividing the sampling sites into clusters to correlate soil fertility classes with the studied soil samples. The prioritization of the soil factors and a spatial analysis of the fertility areas were carried out using the Analytic Hierarchy Process (AHP) and GIS tools, respectively. The AHP analysis outcome indicated that hydraulic properties had the highest weighted value, followed by physical and chemical properties, regarding their influence on SF. The spatial distribution map of physico-chemical properties also clearly depicts the standard classification. A fuzzy priority map was implemented based on all the classes parameters to identify the five fertility classes of the soil, namely very high (0.05%); high (16.59%); medium (60.94%); low (22.34%); and very low (0.07% of total area). This study will be of significant value to planners and policymakers in the future planning and development of activities and schemes that aim to solve similar problems across the country.

This study investigates the effects of tillage and mulching regimes on rice-sweet corn systems in the lower Gangetic plains, focusing on region-specific and crop-specific impacts on soil-crop-environmental parameters. The experiment consisted of three levels of tillage: conventional (CT), minimum (MT), and zero (ZT), and four levels of mulching: live, leaf litter, paddy straw, and no mulching. The results show that ZT tillage resulted in higher bulk density (BD) compared to other treatments, despite an increase in soil organic carbon (SOC). Live and leaf litter mulching led to slight reductions in BD in the upper soil layers. CT resulted in net depletion of SOC whereas ZT registered a positive sequestration rate of 1.19 Mg ha⁻¹ yr⁻¹. Live and leaf litter mulching increased SOC sequestration by 42.6% and 38.8% compared to paddy straw mulching, respectively. Initially, ZT resulted in a 10.3% reduction in system productivity compared to CT, while MT yields were comparable to CT. However, mulching regimes consistently improved production by 16.4%–25.2% as compared to no mulch. ZT and MT were found to be more affordable than CT, with cost savings of 18.2% and 6.8%, respectively. ZT had the highest B: C ratio, indicating better economic efficiency. Among the mulching treatments, live mulching was the most economical. Both ZT and MT saved input energy by approximately 22.9% and 13.5%, respectively compared to CT. Live mulching resulted in the highest net energy and energy output. Compared to CT, ZT reduced carbon footprint (CF) by 41.5 and 22.2% in rice and sweet corn, respectively. MT scored midway between ZT and CT in all parameters. CT exhibited several limitations, including high input energy requirements, high cost of cultivation, poor economic efficiency, negative environmental impacts, and loss of SOC. ZT initially experienced yield reduction and lower net returns in the early years. Therefore, MT was identified as the best alternative in the initial years before transitioning completely to ZT, as it provided comparable yields to CT with better overall benefits. Among the soil cover regimes, live mulching was found to be the most favorable option across all dimensions.

Global food and feed production may face significant challenges in the future due to faster soil degradation, erratic weather pattern, population boom and changing food habits. Quality soils are critical for producing food and feed required for increasing global population. The greatest threat to food security comes from soil losses brought on by urbanization, industrialization, and transportation. More than 50% of the global food and feed demands are met by the small farms which constitute 40% of the agricultural land area. However, yield disparities and financial concerns impede the capacity to boost production in these sectors. The rising need for food requires the development of soil management strategies and ensure long-term soil fertility. Actions and policies should promote changes to more nutrient-efficient diets, soil fertility maintenance as well as restoration, and greater adaptability to climate change in order to better utilize and safeguard soil resources. <!----> <!----> <!----> <!---->