3T1R four-degrees-of-freedom (DOF) parallel manipulators (3T1R-PMs) are the parallel counterparts of the 4-DOF SCARA serial robots. In a 3T1R-PM, the moving platform can generate 3T1R motion (also called Schonflies motion), which refers to a rotation about any axis with a given direction in conjunction with 3-DOF translations. A method is proposed for the type synthesis of 3T1R-PMs based on screw theory. The wrench systems of a 3T1R parallel kinematic chain (3T1R-PKC) and its legs are first analyzed. A general procedure is then proposed for the type synthesis of 3T1R-PMs. The type synthesis of legs for 3T1R-PKCs, the type synthesis of 3T1R-PKCs, as well as the selection of actuated joints of 3T1R-PMs, are dealt with in sequence. 3T1R-PKCs with and without inactive joints are synthesized. The phenomenon of dependent joint groups in a 3T1R-PKC is revealed for the first time. Several 3T1R-PMs with identical type of legs are obtained.

A method is proposed for the type synthesis of 3-DOF (degree-of-freedom) translational parallel manipulators (TPMs) based on screw theory. The wrench systems of a translational parallel kinematic chain (TPKC) and its legs are first analyzed. A general procedure is then proposed for the type synthesis of TPMs. The type synthesis of legs for TPKCs, the type synthesis of TPKCs as well as the selection of actuated joints of TPMs are dealt with in sequence. An approach to derive the full-cycle mobility conditions for legs for TPKCs is proposed based on screw theory and the displacement analysis of serial kinematic chains undergoing small joint motions. In addition to the TPKCs proposed in the literature, TPKCs with inactive joints are synthesized. The phenomenon of dependent joint groups in a TPKC is revealed systematically. The validity condition of actuated joints of TPMs is also proposed. Finally, linear TPMs, which are TPMs whose forward displacement analysis can be performed by solving a set of linear equations, are also revealed.

There are usually several motion patterns having the same degrees of freedom (DOF). For example, planar motion, spherical motion, and spatial translation are motion patterns with 3 DOF. An $f$-DOF parallel mechanism with multiple operation modes is a parallel mechanism that can generate different motion patterns with $f$ DOF. Up to now, no method has been proposed for the type synthesis of parallel mechanisms with multiple operation modes. This paper presents a general method for the type synthesis of parallel mechanisms with multiple operation modes. Using the proposed approach, 3-DOF parallel mechanisms with both spherical and translational modes, i.e., parallel mechanism generating both a spherical motion pattern and a spatial translational motion pattern, are generated systematically. A large number of parallel mechanisms with both spherical and translational modes are obtained.

A spherical parallel manipulator (SPM) refers to a 3-DOF (degree-of-freedom) parallel manipulator generating 3-DOF spherical motion. A method is proposed for the type synthesis of SPMs based on screw theory. The wrench systems of a spherical parallel kinematic chain (SPKC) and its legs are first analyzed. A general procedure is then proposed for the type synthesis of SPMs. The type synthesis of legs for SPKCs, the type synthesis of SPKCs, as well as the selection of inputs of SPMs are dealt with in sequence. An input validity condition of SPMs is proposed. SPKCs with and without inactive joints are synthesized. The number of overconstraints of each SPKC is also given. The phenomenon of dependent joint groups in an SPKC is revealed for the first time.