With the development of space laser communication and the planned deployment of satellite Internet constellations, there is a growing demand for microminiature laser communication terminals. To meet the requirements of size, weight and power (SWaP), miniaturized terminals require smaller drive components to complete on-orbit scanning and capture, which must be fast and efficient to enable satellite laser communication networks. These miniaturized laser communication terminals are highly susceptible to the impact of the initial pointing accuracy of the laser beam and microvibrations of the satellite platform. Therefore, this paper proposes a laser scanning-capture model based on a Micro-electromechanical Systems (MEMS) micromirror that can provide a fast, large-scale scanning analysis. A scanning overlap factor is introduced to improve the capture probability under the influence of microvibrations. Finally, experimental analysis was carried out to verify the effectiveness of the proposed model, which can establish a theoretical basis for future ultra-long-distance microspace laser communication.

In deep-space optical communication systems, precise pointing and aiming of the laser beam is essential to ensure the stability of the laser link. In this paper, an adaptive compound control system based on adaptive feedforward and Proportional-Integral-Differentiation (PID) feedback is proposed. The feedforward controller is stabilized using Youla-Kucera (YK) parameterization. In the YK parameterized structure, the free parameter Q(z) consists of an adaptive filter. The proposed method constitutes an adaptive feedforward control algorithm through the adaptive filter Q(z). The problem of suppressing laser jitter is transformed into a problem of minimizing a sensitivity function containing the adaptive filter. The stability of the compound control system is ensured by configuring the individual parameters of the YK parameterized feedforward controller and the PID controller, and the adaptive regulation of the controller is realized on the premise of system stability. To verify the effectiveness of the compound control system, we established an experimental platform for laser beam stabilization control. We experimentally compare the effectiveness of the proposed control method with the classical method. The experimental results show that the method proposed in this paper can effectively suppress the complex laser beam jitter consisting of narrow-band sinusoidal and broad-band continuous vibrations.

Magnetohydrodynamic (MHD) ARS can precisely detect angular vibration information with a bandwidth of up to one kilohertz. However, due to secondary flow and viscous force, it experiences performance degradation when measuring low-frequency angular vibrations. This paper presents an adaptive Kalman filter that uses online angular random walk (ARW) estimation to correct for the low-frequency error of MHD ARS, where a microelectromechanical system (MEMS) gyroscope is used to measure low-frequency vibrations. The proposed algorithm determines the signal frequency based on the ARW coefficients and adjusts the measurement noise covariance to achieve accurate fusion results. Thus, the method solves the problem of frequency-dependent variation of the amplitude response of the sensors in data fusion. Initially, the algorithm calculates ARW coefficient recursively utilizing the measurement signals of both sensors. Then, the operational frequencies of both sensors are determined by analyzing the correlation between the ARW coefficient and frequency. Subsequently, in the Sage-Husa adaptive Kalman filter, the Kalman gain matrix is adjusted by modifying the measurement noise variances of both sensor signals individually. Moreover, the stability of the proposed algorithm is achieved by introducing an adaptive matrix to constrain the measurement noise covariance estimation. In the experiment, the fusion effects of single-frequency and mixed-frequency signals are tested separately. The experimental results show that for frequency variation and frequency mixing, the proposed algorithm in this study significantly improves the fusion results.

The magnetohydrodynamic angular rate sensor (MHD ARS) is a high-bandwidth, high-accuracy sensor that is increasingly used to measure spacecraft harmonic vibration. However, the amplitude of harmonic vibration is usually on the order of microradian to milliradian, and the induced electric potential signal of MHD ARS is only on the order of nanovolt to microvolt, which is easily disturbed by noise. In this paper, an improved method based on autocorrelation with Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) and Wavelet Threshold Denoising (WTD) is proposed to denoise the signal of MHD ARS. Firstly, CEEMDAN is used to decompose noisy signals and obtain intrinsic mode functions (IMFs), and autocorrelation is used to determine the relevant modes where the effective signals are located. Then, the improved threshold and thresholding function are used to denoise the relevant modes. Finally, the denoised signal is obtained by combining the denoised relevant modes. In the experiment, noisy MHD ARS signals were recorded in static and dynamic conditions, and the effects of the proposed method and conventional methods were compared. The results of the Allan variance in the static condition and root-mean-square error in the dynamic condition show that the proposed method can effectively overcome the shortcomings of conventional methods and obtain a better denoising effect.