Hydrogen (H2) produced from renewables will have a growing impact on the global energy dynamics towards sustainable and carbon‐neutral standards. The share of green H2 is still too low to meet the net‐zero target, while the demand for high‐quality hydrogen continues to rise. These factors amplify the need for economically viable H2 generation technologies. The present article aims at evaluating the existing technologies for high‐quality H2 production based on solar energy. Technologies such as water electrolysis, photoelectrochemical and solar thermochemical water splitting, liquid metal reactors and plasma conversion utilize solar power directly or indirectly (as carbon‐neutral electrons) and are reviewed from the perspective of their current development level, technical limitations and future potential.
9 March 2016 in Industrial & Engineering Chemistry Research
The influence of N2 on CO2 adsorption was evaluated using a microporous biochar with a narrow pore size distribution. The adsorption isotherms of pure CO2 and N2 were measured at 0, 30, 50 and 70 °C up to 120 kPa and fitted to the Toth adsorption model. Dynamic breakthrough experiments were carried out in a fixed-bed adsorption unit using binary mixtures with compositions representative of different post-combustion streams (8-30% CO2) from ambient temperature to 70 °C. Dynamic adsorption experiments were simulated to validate the mathematical model of the adsorption process, as a necessary step for its later use for process design. The Ideal Adsorption Solution (IAS) theory, based on the pure component adsorption models, was used to account for competitive adsorption with satisfactory results. The information gathered in the present work will be used to extend the validity of the model to the adsorption of post-combustion streams containing H2O in Part II.
Biomass is a widely distributed and renewable source of carbon. The main objective of this work is to produce an activated carbon from coconut shells with suitable characteristics to separate CO2 from biogas. The textural characterization of the adsorbent has been determined. Pure component adsorption isotherms of CO2 and CH4 at 30, 50 and 70 °C have been measured. The results reveal that the activated carbon had high CO2 adsorption capacity. Equilibrium of adsorption of CO2 and CH4 adsorption on the produced activated carbon reached 8.36 mmol/g and 4.63 mmol/g, respectively, at 30 °C and 10 bars. Moreover, the performance of the produced activated carbon, as a potential adsorbent for CO2 capture from a CO2/CH4 gas mixture, has been evaluated under dynamic conditions in a dedicated fixed-bed setup. The CO2 and CH4 adsorption capacities of the produced activated carbon are estimated to be 1.86 and 0.52 mol/kg, respectively, at 30 °C and 1 bar.
The main drawbacks of developing carbon adsorbents from pine sawdust, an abundant biomass feedstock, are the low carbon yield of the process and the poor mechanical properties of the resulting carbons. In an attempt to overcome these limitations, the effect of the addition of coal tar pitch was assessed. Adsorbent pellets were produced from pine sawdust and coal tar pitch by activation with CO2. The preparation process was optimized by using as decision variables the carbon yield and the adsorption performance of the adsorbents in conditions representative of post-combustion capture applications (10% CO2 at atmospheric pressure and at 50 °C). Subjecting the composite pellets to a pre-oxidation treatment with air increased the carbon yield of the production process, and also improved the adsorption kinetics and capacity of the final adsorbents. The prepared adsorbents present a high carbon yield, a superior mechanical resistance and a competitive adsorption performance.This work was carried out with financial support from the Spanish MINECO (Project ENE2011-23467), co-financed by the European Regional Development Fund (ERDF). M.G.P. acknowledges funding from the CSIC (JAE-Doc program), co-financed by the European Social Fund, and I.D. acknowledges funding from the Government of the Principado de Asturias.\ud The authors are grateful to Industrial Química del Nalón S.A. for supplying the coal tar pitch sample.Peer reviewe