The penetration fuze, as the initiation control component of the penetration weapon, usually experiences an overload of tens of thousands or even hundreds of thousands of g during the penetration process. In order to prevent the fuze from being overloaded and causing the weapon to explode or misfire early, this article introduces the use of internal sealing reinforcement and external energy absorbing buffer materials to protect the internal circuit modules of the fuze. Several kinds of energy absorbing and buffering materials, including foam metal materials and composite sandwich structure materials, as well as metamaterials that have recently attracted the attention of industry and academia, are reviewed. The high overload impact energy absorption characteristics of materials and the mechanical properties of different material structures are emphatically introduced. In addition, this article also evaluates the applicability and limitations of existing buffer materials and methods, and proposes some potential improvement plans, such as the impact of parameters such as viscoelasticity, porosity, surface coating, printing process, heat treatment process on the energy absorption effect of materials, further improving the engineering practicality of buffer protection materials. A summary of the key technologies in the research of penetration fuze protective materials was made, and some mechanical testing methods were proposed, which can better characterize the impact resistance and resilience of materials. Finally, the future development direction of buffer materials for penetration fuzes was explored, which will help promote the research on the concept of buffer materials used on penetration missiles.
To enhance the impact resistance of penetration fuze, this paper investigates the response of fuze buffer materials to stress waves and develops a model for stress wave transmission inside the fuze. The stress concentration impacts of different cell structures of Imitation Bamboo Type Penetration Fuze Buffer Protection Structure (IBS) under stress wave action are compared and analyzed. The paper elucidates the impact of different cell parameters on stress concentration impacts, establishes nonlinear fitting functions of Stress Concentration Factor (SCF) and cell parameters, and solves the prediction error. Based on the wave function expansion method, an expression for Dynamic Stress Concentration Factor (DSCF) when stress waves interact with the potting material is derived, and numerical results of DSCF around bubbles under different physical parameters are provided. Finally, dynamic impact tests are conducted on the combined buffer scheme of penetration fuze. Impact test results show that, under an initial velocity impact of 50 m/s, the overload peak attenuation rate is 39.42%, and under an initial velocity impact of 70 m/s, the overload peak attenuation rate is 32.87%. IBS can effectively protect the electronic components inside the fuze.
To address the interception problem against maneuvering targets, this paper proposes a multi-agent cooperative guidance law based on a multi-directional interception formation. A three-dimensional agent–target engagement kinematics model is established, and a fixed-time observer is designed to estimate the target acceleration. By utilizing the agent-to-agent communication network, real-time exchange of motion state information among the agents is realized. Based on this, a control input along the line-of-sight (LOS) direction is designed to directly regulate the agent–target relative velocity, effectively driving the agent swarm to achieve time-to-go consensus within a fixed-time boundary. Furthermore, adaptive variable-power sliding mode control inputs are designed for both elevation and azimuth angles. By adjusting the power of the control inputs according to a preset sliding threshold, the proposed method achieves fast convergence in the early phase and smooth tracking in the latter phase under varying engagement conditions. This ensures that the elevation and azimuth angles of each agent–target pair converge to the desired values within a fixed-time boundary, forming a multi-directional interception formation and significantly improving the interception performance against maneuvering targets. Simulation results demonstrate that the proposed cooperative guidance law exhibits fast convergence, strong robustness, and high accuracy.
When a missile-borne pulsed laser forward detection system flies at supersonic speed, the laser beam will be distorted by the uneven outflow field, resulting in a significant reduction in ranging accuracy. In this paper, the impact of high flight speed on a pulsed laser detection system is studied. First, a new ray tracing method with adaptive step size adjustment is proposed, which greatly improves the computational efficiency. Second, the aerodynamic environment of a munition flying at high speed is simulated by an intermittent transonic and supersonic wind tunnel to obtain the schlieren data of the flow field at various Mach numbers. The schlieren data present a shock wave structure similar to that of the simulation. In addition, the variation patterns of the pulsed laser echo waveform of the model under different aerodynamic conditions are studied to evaluate the detectability and operational stability of the laser detection system under static conditions. The test results match the simulation results well, and the two offer relatively consistent shock wave structures, which verifies the correctness and effectiveness of the flow field simulation model. The test echo waveforms are in good agreement with the simulated echo waveforms; the relative errors between the peak values of test and simulated echo waveforms at various Mach numbers do not exceed 20%, and the correlation coefficients between the test and simulated echo waveforms all exceed 0.7, indicating high correlations between the two.
To address the problem of cooperative multi-vehicle operations targeting critical objectives in three-dimensional space, this paper proposes a variable-power adaptive fast sliding-mode guidance law. First, a dynamic vehicle–target model is established in three-dimensional space by using the projection of the horizontal vehicle–target plane to determine the reference plane. The guidance law design is projected onto the reference plane based on the average consensus convergence control method. This not only drives the estimated deviations to zero to achieve time consistency but also ensures that the estimated time-to-go converges to the actual time-to-go. Additionally, an adaptive input compensation component is designed in the vertical line-of-sight (LOS) direction, driving the aspect angle to converge to zero before the final point is reached. Furthermore, in the vertical reference plane direction, an adaptive variable-power sliding-mode control method is designed based on the traditional sliding-mode control scheme, in which the corresponding power exponent is selected according to the variation exhibited by the sliding-mode values. On the one hand, higher power levels can result in faster convergence; on the other hand, lower power levels can be associated with better stability. Compared with the traditional sliding-mode control technique, the proposed method achieves guaranteed stable convergence at the end of the control process, with a 49% improvement in convergence efficiency. Finally, simulations verify the designed three-dimensional guidance law, demonstrating that it features fast convergence, high stability, and high precision.
Anti-collision detection technologies primarily rely on optical, radar, or laser sensors; however, their performance often deteriorates severely under adverse weather conditions (e.g., rain, snow, fog) or in scenarios involving visual occlusion. By contrast, magnetic anomaly detection leverages perturbations in the geomagnetic field induced by target objects (e.g., vehicles, metallic obstacles), exhibiting intrinsic all-weather operability and strong anti-interference capability. Nevertheless, conventional magnetic anomaly detection methods suffer from the limited applicability of the magnetic dipole model, which only affords coarse positioning accuracy and is predominantly suited for long-range targets. To address this limitation, this paper proposes an Extended N-th-Pole Magnetic Dipole (E-NMD) model that improves accuracy by analyzing the Lagrangian cosine term and rigorously constraining truncation errors under specific operational conditions. Experimental results demonstrate that, for steel with a relative permeability of 200, the model achieves a fitting variance of 99.87%. Furthermore, to overcome the inversion difficulties arising when the strength of short-range magnetic anomalies is comparable to sensor noise, an Adaptive Iterative Extended Kalman Filter (AI-EKF) is developed to enable robust noise suppression and precise distance estimation. Results indicate that E-NMD outperforms the traditional N-th-Pole Magnetic Dipole (NMD) model in proximal state estimation, achieving a 39.62% reduction in Root Mean Square Error (RMSE). Finally, in light of parameter uncertainty in magnetic anomaly targets under real-world conditions, a Dual-Mode Pairwise Iterative Extended Kalman Filter (DI-EKF) is introduced to jointly estimate parameters and system states, yielding an 89% reduction in RMSE compared to AI-EKF.