γ-Valerolactone (GVL) has been proposed as a sustainable liquid, and could be used for the production of hydrocarbons by using both homogeneous and heterogeneous catalytic systems. The selective reduction of levulinic acid (LA) to GVL is a key transformation for biorefinery concepts based on platform molecules. We report a detailed investigation of the conversion of LA to GVL using molecular hydrogen in the presence of a catalyst in situ generated from Ru(acac)3, and electronically and sterically characterized alkyl-bis(m-sulfonated-phenyl)- and dialkyl-(m-sulfonated-phenyl)phosphine (RnP(C6H4-m-SO3Na)3−n (n = 1 or 2; R = Me, Pr, iPr, Bu, Cp) ligands. The hydrogenation experiments were performed in the range of 5–100 bar H2 at 140 °C using 0.016 mol% catalyst and 5–20 eqv. of ligand. The effects of hydrogen pressure and Ru/ligand ratio on the LA conversion were determined. The nBuP(C6H4-m-SO3Na)2 (χ = 12.5, θTol = 153°) showed the highest activity achieving turnover numbers up to 6200 with a yield and selectivity higher than 99% in a solvent, chlorine and promoter free reaction mixture. The catalyst was successfully recycled for six consecutive runs without loss of activity. The characterization of sulfonated and non-sulfonated phosphines indicated that the sulfonation had no significant effect on the steric and electronic properties of the ligands.
Levulinic acid can be hydrodeoxygenated either to γ-valerolactone or to 2-methyltetrahydrofuran over the Co/SiO 2 catalyst. Selectivity was controlled by the hydrogenation activity of the catalyst.
Step by step alkylation of acetone (A) with ethanol (E) in a ratio of 1 : 2 was investigated. A fixed bed flow-through reactor system was used at a total pressure of 21 bar and in the temperature range of 150–350 °C in inert He or a reducing H2 medium. Following the hydrogen borrowing methodology, two types of catalysts were prepared; using neutral activated carbon (AC) and alkaline hydrotalcite (HT) supports, namely 5 wt% Pd/AC in the presence of alkaline additives (10, 20 and 30 wt% KOH or 20% K3PO4); 9 wt% Cu/HT and 5 wt% Pd/HT. The catalysts were activated in a H2 flow at 350 °C. Different yields of mono- or dialkylated ketones were observed. In a hydrogen medium over the same catalyst systems the ketone products could be reduced to alcohols. In this study the Pd/HT catalyst seems to be the most promising for fuel production based on biomass fermentation.
This study proves that the non-food dedicated sweet sorghum (Sorghum bicolor) can be a possible source and/or raw material of platform molecules such as levulinic acid (LA) and 5-hydroxymethyl-2-furaldehyde (5-HMF). The high sugar-containing juice derived from sweet sorghum can be efficiently converted to LA and 5-HMF by using microwave dielectric heating. Centrifugal separation was proposed as a first step of the technology to remove the insoluble materials (fibers, starch, and sand) to obtain high sugar containing feedstock for acid-catalyzed dehydration. The effects of pretreatment by centrifugal separation and reaction conditions (irradiation time, acid concentration and reaction temperature) on the formation of levulinic acid were studied. The conversions were monitored by in situ NMR spectroscopy. It was shown that maximum yield (31.4%) of LA was achieved in the presence of 2 M sulfuric acid by applying 30 min irradiation at 160 °C to the sorghum sample treated for 20 min in a centrifuge at a rotational force of 5870. It was also revealed that 5-HMF can be produced from the sweet sorghum juice in the presence of 0.05 M sulfuric acid at 120 °C.