The development of a robust 3D imaging system for underwater applications is a crucial process in underwater imaging where the physical properties of the underwater environment make the implementation of such systems challenging. Calibration is an essential step in the application of such imaging systems and is performed to acquire the parameters of the image formation model and to enable 3D reconstruction. We present a novel calibration method for an underwater 3D imaging system comprising a pair of cameras, of a projector, and of a single glass interface that is shared between cameras and projector(s). The image formation model is based on the axial camera model. The proposed calibration uses a numerical optimization of a 3D cost function to determine all system parameters, thus avoiding the minimization of re-projection errors which require numerically solving a 12th order polynomial equation multiple times for each observed point. We also propose a novel stable approach to estimate the axis of the axial camera model. The proposed calibration was experimentally evaluated on four different glass interfaces, wherein several quantitative results were reported, including the re-projection error. The achieved mean angular error of the system’s axis was under , and the mean absolute errors for the reconstruction of a flat surface were mm for normal glass interfaces and mm for the laminated glass interface, which is more than sufficient for application.
23 February 2026 in IEEE Transactions on Instrumentation and Measurement
The development of robust fringe patterns for an underwater imaging is challenging due to the unique physical properties of the underwater environment. A line in the image plane, when projected through a flat refractive interface, deforms which introduces errors in both calibration and reconstruction procedures. In this paper, we present a novel image formation model, based on the axial camera model, which utilizes phase shifted quasi-elliptical fringe patterns for the underwater imaging. When projected through flat refractive interfaces, deformed elliptical fringe patterns produce concentric cones of camera rays in the outmost medium, each uniquely identified by its radius encoded in the phase. Triangulation is then achieved by computing ray-cone intersections, with extraneous solutions filtered out since more than one viable solutions exist. The proposed quasi-elliptical fringe pattern was experimentally evaluated by imaging calibration objects and performing 3D reconstruction, wherein quantitative results demonstrate the feasibility of the proposed method.