The drying of compact and biologically active materials presents significant challenges. In this study, we propose using electrostatic field–ultrasonic coupling pretreatment to enhance the drying efficiency of ginkgo fruits. We designed and constructed an experimental device to investigate the effects of ultrasonic power, pretreatment time, hot air drying temperature, and electrostatic field voltage on the moisture content of the fruits. We used the response surface methodology to identify optimal process conditions and further explored the kinetic model for the moisture content of the fruits under the pretreatment. The results showed that the optimal process parameters for electrostatic–ultrasound pretreatment and the drying of ginkgo fruits were: an electrostatic field voltage of 11.252 kV, an ultrasound power of 590.074 W, a pretreatment time of 32.799 min, and a hot air drying temperature of 85 °C. Under the optimized process conditions, the correlation between the moisture content of ginkgo fruits and the two-term drying kinetics model was the highest. After electrostatic–ultrasound coupling pretreatment, the drying rate of ginkgo fruits was significantly improved during hot air drying.
1 January 2016 in Journal of the Serbian Chemical Society
A method for the iodine-catalyzed conjugation of soybean oil was developed, and the conjugated product was analyzed by UV, IR, and 1H NMR. The results indicated that the optimal conditions for conjugation included a temperature of 180°C, a catalyst loading of 0.5 wt.% and a reaction time of 3 h, at which the concentration of conjugated linoleic acid was 1.51 mol L-1, with 92 % conversion, the CLNA reached 0.225 mol L-1 when the temperature was 130°C, a catalyst loading of 0.5 wt.%, and a reaction time of 3 h with a conversion rate of 99.9 %. The reaction predominantly produced trans-trans, trans-cis and cis-trans isomers. It was also revealed that the conjugation of linolenic acid was much faster than that of linoleic acid. The method possessed the advantages of a short procedure, a high conversion rate, and no methyl esterification of the raw material, and it was an environmentally friendly technology that does not use solvents.