This research proposed a cascaded multi-level inverter (CMLI) technique using Harris Hawk’s Optimisation (HHO) for grid-connected P.V. systems. The photovoltaic (P.V.) system is connected to CMLI-isolated DC connections based on the relevant D.C. to D.C. converters. The main goal of the suggested approach is to control power or boost solar system energy conversion while maintaining power quality. CMLI is integrated into fewer switches, diodes, and sources to produce the best control signal with the suggested controller. To provide the best control signal data set for the CMLI, the gain parameter under the source's current normal value is assessed using the HHO. The proposed control theory and keeping the power factor constant control the active power fed to the grid. The suggested approach of integrating solar electricity into the grid using DC-DC converters and an asymmetric multi-level inverter structure is supported by the reduction in THD and active power to the grid. The suggested model is developed using the MATLAB/SIMULINK programme, and the experimental setup is used to validate the results. On the grid side, lower THD was attained, which complies with IEEE standards. .
13 June 2023 in Journal of Advanced Research in Applied Sciences and Engineering Technology
This article proposed a hybrid control topology to cascaded multilevel-inverter (CMLI) using 11-level for the grid-tied photovoltaic generation system. The proposed hybrid technique combines an archerfish hunting optimiser (AHO) and Spike Neural Network (SNN); hence, it is called the AHO-SNN technique. The proposed control technique is to maintain the regulation of power or maximal energy conversion of the solar subsystem and reduce total harmonic distortion (THD). Here, the AHO is utilised to construct the optimum control signal dataset. The best control signals are estimated using a data set performed by SNN. The resultant control signals will regulate insulated-gate-bi-polar-switches (IGBT) of Cascaded MLI. The proposed AHO-SNN control topology determines the converter switching states by constructing the operating modes of the generation system. The system parameter changes and outside disturbances are optimally minimised with this control strategy. The proposed AHO-SNN control is done in MATLAB platform, and it evaluated their performance by using existing methods, like War Strategy Optimization Algorithm (WSO) Fuzzy Wavelet Neural Network (FWNN), Side-Blotched Lizard Algorithm (SBLA), Adaptive Neuro-Fuzzy Inference System (ANFIS), and Memetic Fire-Fly Algorithm (MFA). The result shows that the proposed approach based on THD is less than existing approaches.
30 December 2022 in International Journal of Electrical and Electronics Research
The major goal about suggested technique is to use a PSO-based proportional-integral (PI) controller towards enhance power quality performance about three-phase grid-connected inverter system. An approach like aforementioned tries to stabilize output current & voltage, lower harmonics, & lessen DC link input voltage fluctuation. Through reducing error about voltage regulator & current controller schemes in inverter system, particle swarm optimization (PSO) technique was used towards adjust PI controller settings. When compared to conventional approach, simulation results show certain optimal parameters PI controller created among PSO produces better performance index results. According towards various research, reactive power supply can only modestly reduce voltage sags while totally mitigating harmonics using specialized power devices. Effective & dependable use about PV solar farm inverters as STATCOMs is required towards guarantee certain generating units stay connected towards grid during voltage sags & towards enhance system performance during abnormal circumstances.
10 June 2023 in International Journal of Electrical and Electronics Research
Power quality is the primary issue to be taken into consideration in modern electrical systems, particularly on the distribution side, to protect sensitive loads. Long-term uses can never run out of renewable resources. Connecting STATCOM at the distribution side enhances the power factor by improving the quality of the current waveform. The reactive power range that needs adjustment by utilising PV arrays on the STATCOM's DC side. Increases due to the large rise in terms of the PV power plants' size and capacity. Cascaded H Bridge multilevel topologies can increase the flexibility and effectiveness of PV modules. The suggested approach in this paper gives outcome of reduced peak over shoot, rise time, settling time, steady state error, percentage of ripples and total harmonic distortion which improves the power quality. PV system with cascaded H bridge multilevel inverters STATCOM for harmonic suppression and to make reactive powerless. To produce modulation indices for H Bridge switching, synchronised reference frame theory is modified. H bridges' average DC voltage is managed by a PI controller, and controller gains are obtained using fuzzy, PSO, and the trial-and-error approach. To confirm the viability of the suggested approach, simulation results using MATLAB/SIMULINK are shown. The experimental setup of proposed method is carried out to validate the inverter response.