The objective of this experiment was to investigate the effects of Lactobacillus plantarum and molasses on the nutrient composition, fermentation quality, bacterial count, aerobic stability, and microflora of alfalfa silage in sandy grasslands. The experimental treatments included control (CK), 10⁶ CFU/g Lactobacillus plantarum (L), 5% molasses (M), and 10⁶ CFU/g Lactobacillus plantarum + 5% molasses (LM). The nutrient composition, fermentation quality, bacterial count, aerobic stability, and microflora were determined after 14 days and 56 days of ensiling, respectively. The results showed that the addition of L, M, and LM reduced dry matter loss (DM), neutral detergent fiber (NDF), and acid detergent fiber (ADF) content, and increased water-soluble carbohydrates (WSC) and ether extract (EE) content, compared to the CK group. Meanwhile, more lactic acid (LA) and accelerated fermentation were observed, causing the pH value to drop below 4.5 in the L, M, and LM groups after 56 days of ensiling. The addition of L, M, and LM promoted lactic acid bacteria (LAB), and inhibited yeast. The addition of L significantly increased the content of acetic acid (AA). In terms of microflora, the addition of L, M, and LM made Firmicutes become the dominant bacterial phylum earlier, while Lactobacillus, Weissella, and Pediococcus had a higher abundance. According to the result of Pearson's correlation, there is a very significant negative correlation between pH value and Lactobacillus (P < 0.01) and a very significant positive correlation between pH value and Lactococcus, Enterobacter, Enterococcus, and Leuconostoc (P < 0.01), which may be inhibited by Lactobacillus under the decreased pH value. The results of the prediction of microbial genes indicated that the addition of M could enhance the carbohydrate metabolism and membrane transport metabolism, which may contribute to LA production by LAB metabolism. In general, L, M and LM all improved the fermentation quality and reduced the loss of nutrients to varying degrees, but considering the fermentation quality, the overall effects of M and LM were better than L. M and LM are recommended to be used as silage additives in the process of alfalfa silage in sandy grasslands to improve the quality.

In the present study, we investigated the effects of cellulase and Lactiplantibacillus plantarum (L. plantarum) on the fermentation quality, microbial diversity, gene function prediction, and in vitro rumen fermentation parameters of the Caragana korshinskii (C. korshinskii) silage. The experimental treatment groups included control (CK), cellulase (C), L. plantarum (L), and cellulase + L. plantarum (CL). Triplicate silos were sampled after 14 and 56 days of ensiling. The microbial diversity of C. korshinskii silage at 56 days was analyzed using Illumina MiSeq sequencing technology, and the effects of C. korshinskii silage on rumen fermentation were evaluated by the in vitro artificial rumen gas production method. The results showed that the addition of cellulose and L. plantarum treatments reduced ammonia-nitrogen (NH₃-N), dry matter (DM), neutral detergent fiber (NDF), and acid detergent fiber content during ensiling. Compared with the CK group, higher lactic acid content was observed in the silage of the C and L groups, but the CL group had a higher acetic acid (AA) content. Compared with the CK group, the relative abundance of Lactiplantibacillus significantly increased, but that of Enterococcus, Weissella, Enterobacter, and Pediococcus significantly decreased in all other groups except the C group (p < 0.05). The results of gene function prediction were as follows: pyruvate kinase, 1-phosphofructokinase, and fructokinase were lactate production enzymes, which suggested the association of the high AA content in the CL group to the high abundance of 6-phosphate glucose dehydrogenase. The abundance of H + -transporting ATPase and ATP-binding cassette (ABC) transporters in the L and CL groups was higher than that in the CK groups. Metabolism of terpenoids and polyketides, mismatch repair, DNA replication, nucleotide excision repair, and homologous recombination increased in the CL group compared with those in the CK group. Compared with the CK group, NH₃-N and microbial protein content and the degradation rates of DM and NDF increased in the L and CL groups. To conclude, the L and CL groups had increased Lactiplantibacillus abundance, improved fermentation quality, and high DM degradation rates compared with the CK group.

3-Nitrooxypropanol (3-NOP) is a nitrooxy compound that specifically targets methyl-coenzyme M reductase (MCR), ultimately resulting in a reduction in methane production. In this study, we undertook an in vitro investigation of the effects of different dosages of 3-NOP on ruminal fermentation parameters, methane production, and the microbial community. A single-factor completely randomized design was adopted, comprising a control treatment (C), where no 3-NOP was added to the fermentation substrate, and three 3-NOP treatments, where 0.025 mg (low-dose treatment, LD), 0.05 mg (medium-dose treatment, MD), or 0.1 mg (high-dose treatment, HD) was added to 1 g of fermentation substrate (DM basis), followed by incubation for 24 h in vitro. The results showed that, compared with the control treatment, the three dosages of 3-NOP reduced total gas production, methane production, and acetate production (all p < 0.01). In contrast, 3-NOP treatment increased H₂ production and the molar proportions of propionate and butyrate (all p ≤ 0.02), resulting in a decrease in the acetate-propionate ratio (p < 0.01). Meanwhile, the microbial profiles were not altered by the treatments, but the relative abundances of Prevotella, Methanobrevibacter, and Ophryoscolex were increased by the MD and HD treatments (all p < 0.01), whereas those of Methanosarcina, Methanosaeta, Sphaerochaeta, RFN20, Entodinium, and Diplodinium were decreased by the HD treatment (all p ≤ 0.03). Moreover, the results of a correlation analysis showed that there was a certain correlation between these microorganisms and total gas production, methane production, H₂ production, acetate, propionate, and butyrate. In summary, under in vitro conditions, the addition of 3-NOP to the diet affected the microbial community structure, thereby altering the ruminal fermentation pattern and reducing methane production. Our results indicated that 0.05 mg per g of dietary DM is the recommended inclusion ratio for 3-NOP in the diet of lambs.

The influence of molasses (M) and Lactobacillus rhamnosus (LR) on fermentation products, microbial communities, and metabolites in big-bale alfalfa silage was investigated. Alfalfa (Medicago sativa L.) was harvested at the third growth stage during the flowering stage in the experimental field of Linhui Grass Company from Tongliao City, Inner Mongolia. An alfalfa sample without additives was used as a control (C). M (20 g/kg) and LR (10⁶ cfu/g) were added either alone or in combination. Alfalfa was fermented for 7, 14, and 56 d. Lactic acid content in the M, LR, and MLR groups increased, whereas the pH value and butyric acid, 2,3-butanediol, and ethanol contents decreased compared to those of C group after 7, 14, and 56 d of fermentation. A two-way analysis of variance (ANOVA) was performed to estimate the results. The LR group exhibited increased Lactobacillus abundance, whereas the M and MLR groups showed increased Weissella abundance compared to the C group. The relative contents of amino acids (tyrosine, isoleucine, threonine, arginine, valine, and citrulline) in the M and MLR groups were higher than those in the C group. During fermentation, the M, LR, and MLR groups showed decreased phenylalanine, isoleucine, and ferulic acid contents. Amino acids such as isoleucine and L-aspartic acid were positively correlated with Lactobacillus but negatively correlated with Weissella. In conclusion, combining high-throughput sequencing and liquid chromatography–mass spectrometry during anaerobic alfalfa fermentation can reveal new microbial community compositions and metabolite profiles, supporting the application of M, LR, and MLR as feed fermentation agents.

Alfalfa is conserved in silo-type bunkers in the cold and humid regions of Inner Mongolia, China. Its quality is essential to ensure a healthy and sustainable dairy production. However, the impact of environmental factors on the microbiota and fermentation products of alfalfa silage remains unclear. The present research examined changes in the microbiota and fermentation products and their association with environmental parameters in 72 samples collected from 12 farms located at 4 different latitudes and longitudes across four regions. The samples were labeled with distinct codes, A, B, and C, from the cold–rainy region, D, E, and F, from the warm–rainy region, G, H, and I from the cold–dry region, and J, K, and L from the warm–dry region. The lactic acid levels ranged from 14.25 to 24.27 g/kg of DM across all samples. The pH and concentrations of NH₃-N and butyric acid in samples A, B, and H were higher (p < 0.01) than in the other samples. Samples D and E had higher acetic acid concentrations and 1, 2-propanediol content (p < 0.01). The fresh material was dominated by Pantoea and Pseudomonas, whereas Lactobacillus was the most dominant genus in all silages, except for the B silage. The A, B, and H silages contained more Clostridium but less Lactobacillus than the other silages. The lactic acid levels were strongly associated with Lactobacillus plantarum, Weissella paramesenteroides, Lactobacillus acetotolerans, Pedobacter borvungensis, and Lactobacillus brevis (p < 0.01). In contrast, the pH and the NH₃-N and butyric acid concentrations were strongly associated (p < 0.01) with the presence of Clostridium estertheticum. A correlation analysis revealed that precipitation, temperature, longitude, and latitude were the most critical factors influencing epiphytic microbes in the fresh material. After silage fermentation, low-temperature conditions significantly affected the fermentation products and microbial community composition. In conclusion, the microbial community of silages is distinctive in cold and humid regions, and climatic parameters ultimately affect the microbiota and fermentation products. Furthermore, the findings of this study demonstrate that Illumina MiSeq sequencing combined with environmental factor assessment might provide new information about the microbiota composition and fermentation quality of silages, facilitating the achievement of high-quality silage.

Aflatoxin B1 (AFB1) is the most toxic mycotoxin and is widespread in moldy feed. The use of biological removal methods to reduce AFB1 has become a research hotspot. This study aimed to isolate lactic acid bacteria (LAB) capable of removing AFB1 from moldy feeds and assessed the removal capacity under various environmental conditions. A strain named Lactobacillus brevis DN-1 was isolated from feed samples and showed 71.38% AFB1 percent removal. Furthermore, DN-1 showed good antifungal activity against Aspergillus flavus BNCC336156 and Aspergillus parasiticus BNCC335939. The optimum growth temperature and pH of DN-1 were 37 °C and 6.0, respectively, and DN-1 grew well in the concentration range of 0–20 µg/L AFB1. Under a temperature of 20–40 °C, pH of 3.0–9.0, and anaerobic conditions, the percent removal of AFB1 was more than 60%. An analysis of the different components of DN-1 showed that cell wall adsorption was the main removal method and suggested the pathway for AFB1 removal by LAB. In addition, strain DN-1 was used as a biological preservative in artificially contaminated peanut and sunflower cakes, which significantly inhibited the growth of mold and production of AFB1. In brief, this study highlights the potential use of DN-1 as a preventive agent against aflatoxicosis via strong removal capability in the application of fermented feed or food.