The need to reach carbon neutrality as soon as possible has made the use of recycled materials widespread. However, the treatment of artificial marble waste powder (AMWP) containing unsaturated polyester is a very challenging task. This task can be accomplished by converting AMWP into new plastic composites. Such conversion is a cost-effective and eco-friendly way to recycle industrial waste. However, the lack of mechanical strength in composites and the low filling content of AMWP have been major obstacles to its practical application in structural and technical buildings. In this study, a composite of AMWP/linear low-density polyethylene (LLDPE) filled with a 70 wt% AMWP content was fabricated using maleic anhydride-grafted polyethylene as a compatibilizer (MAPE). The mechanical strength of the prepared composites is excellent (tensile strength ~18.45 MPa, impact strength ~51.6 kJ/m²), making them appropriate as useful building materials. Additionally, laser particle size analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, and thermogravimetric analysis were used to examine the effects of maleic anhydride-grafted polyethylene on the mechanical properties of AMWP/LLDPE composites and its mechanism of action. Overall, this study offers a practical method for the low-cost recycling of industrial waste into high-performance composites.

The search for lightweight and low-cost anticorrosion coatings is particularly important in coastal environments with high salt and humidity. Graphene-based anticorrosion coatings are currently unable to provide long-lasting corrosion protection for metals because of their “corrosion-promoting activity”, and graphene-like materials, such as molybdenum disulfide (MoS₂), are beginning to be anticipated its ability to protect against metals. This paper reported a simple method for preparing polypyrrole (PPy)-modified MoS₂ nanomaterials from natural bulk MoS₂. Their corrosion resistance behavior as fillers for epoxy (EP) resins was investigated in 3.5 wt.% NaCl solution. After the preparation of the MoS₂ nanosheet dispersion by liquid-phase sonication using ethanol aqueous solution, the polypyrrole-coated molybdenum disulfide nanomaterials (MoS₂@PPy) were directly obtained by adding pyrrole monomer to it in the presence of the initiator ammonium persulfate. Tafel polarization curves showed that the corrosion current of the MoS₂@PPy/EP coating was 0.006 µA/cm² after 15 days of immersion in 3.5 wt.% NaCl solution, much lower than that of pure EP coating (19.134 µA/cm²), effectively improving the anticorrosive properties of the coating. Overall, this study offered a practical method for the application of natural bulk MoS₂ for corrosion protection.

Waste resource utilization can save energy, reduce costs, and is one of the important means to protect the environment. Flue-gas desulphurized (FGD) gypsum is a common industrial by-product. These by-products are not only difficult to use, but also have serious impacts on the ecological environment. The conventional process of the industrial utilization of the calcium sulfate whisker pretreatment process leads to a low utilization rate of FGD gypsum, further increasing the consumption of resources and leading to secondary pollution. This study presents a method of preparing composites by adding FGD gypsum directly into epoxy resin with polyethylene-grafted maleic (PGM) anhydride as a compatibilizer of FGD gypsum/epoxy resin composites. Results showed weak tensile properties and impact properties of the composites when only FGD gypsum was added. When the amount of PGM added was 6 wt%, the tensile properties and impact properties of FGD gypsum/epoxy resin composites improved by 75% and 63%, and compared with the neat epoxy resin, the tensile properties and impact properties of FGD gypsum/epoxy resin composites, respectively, improved by 30% and 57%. Additionally, laser particle size analysis, X-ray diffraction (XRD) analysis, Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), a thermogravimetric analyzer (TGA), and a Differential scanning calorimeter (DSC) were used to examine the effects of PGM on the mechanical properties of FGD gypsum/epoxy resin composites and its mechanism of action. The recycling of FGD gypsum in resin materials has been extended in this study.