A simple NaOH-modified biochar with the pyrolysis temperature of 300 °C (NaCBC₃₀₀) was synthesized, characterized, and investigated for the adsorption performances and mechanisms of methylene blue.

Dye is an anionic common pollutant in industrial wastewater and poses a great threat to the environment and human health. Owing to its advantageous adsorption capacity, nanocellulose is widely used for wastewater treatment. The cell walls of Chlorella mainly comprise cellulose instead of lignin. In this study, residual Chlorella-based cellulose nanofiber (CNF) and cationic cellulose nanofiber (CCNF) with surface quaternization were prepared through homogenization. Moreover, Congo red (CR) was used as a model dye to measure the adsorption capacity of CNF and CCNF. The adsorption capacity was almost saturated when CNF and CCNF contacted CR for 100 min, and the adsorption kinetics coincided with the pseudo-secondary kinetics model. The initial concentration of CR considerably affected its adsorption on CNF and CCNF. Below the initial concentration of 40 mg/g, the adsorption on CNF and CCNF considerably increased with the increase in the initial concentration of CR. Based on the sorption isotherms analysis of CNF and CCNF, the Langmuir model fitted best with the experimental data. Thus, CNF and CCNF surfaces were uniform, and monolayer adsorption occurred. The adsorption of CR on CNF and CCNF was greatly affected by the pH value, and the acidic medium favored the adsorption of CR (especially for CCNF). CCNF showed a more advantageous adsorption capacity, with a maximum value of 1657.89 mg/g, compared to that of CNF (190.0 mg/g). According to the findings of this study, residual Chlorella-based CCNF could be a very promising adsorbent candidate for removing anionic dyes from wastewater.

In recent years, global warming caused by the greenhouse effect has become one of the greatest threats to mankind. This will have a serious impact on the environment and human body, such as land desertification, increase in ocean acidity, sea level rise, and increase in pests and diseases; affect peoples normal work and rest; and make people feel dizzy and nauseated. Excessive emissions of carbon dioxide (CO₂), the main component of the greenhouse gas, have contributed to the continued rise in Earths temperature. Although the world is vigorously developing clean energy to reduce carbon emissions, it will not replace fossil fuels in the short term. The conversion of biomass into energy is the most important way of energy utilization. Biomass energy refers to the solar energy stored in biomass in the form of chemical energy and is the fourth major energy source after oil, coal, and natural gas. At present, biofuels have gone through three developmental stages, which can be divided into first-generation biofuels, second-generation biofuels, and third-generation biofuels according to the types of raw materials and development history. The first generation of biofuels produced from food crops, such as bioethanol derived from sucrose and starch, has already entered the energy market. However, because the first generation of biofuels uses food crops as raw materials, there is a phenomenon of competing with people for food, and it is difficult to achieve large-scale application. To avoid the problem of food shortages, second-generation biofuels produced from nonfood crops, such as wood fiber, have been developed. Microalgae biomass energy is favored by governments and scholars all over the world because of its unique advantages of fast reproduction speed and high oil content. The cultivation of microalgae does not occupy traditional farmland, and the marginal land such as mountains, oceans, and deserts can cultivate microalgae, or develop microalgae cultivation in the air through the innovation of microalgae photosynthetic reactors. When municipal wastewater, food industry wastewater, and aquaculture wastewater are used as the medium for large-scale cultivation of microalgae, and waste gas from biogas power generation, flue gas from coal power plants, and industrial waste gas from fermentation are used as the CO₂ gas source for large-scale cultivation of microalgae, it can be further reduced. The comprehensive production cost of microalgae bioenergy plays a significant emission reduction effect. Combining the above advantages, the use of microalgae to produce first- or second-generation bioenergy has become a new research direction. This study focuses on the review of microalgal biomass in fuel, nonfuel, wastewater treatment, and fuel cell.