The frequency stability of free-running lasers is susceptible to the influence of environmental factors, which cannot meet the long-term frequency stabilization requirements for atom interferometry precision measurements. To obtain a frequency-stabilized 780 nm laser beam, an automatic frequency stabilization system for an external cavity diode laser (ECDL) based on rubidium (Rb) atomic saturated absorption spectrum was designed using a commercial data acquisition (DAQ) card. The signals acquired by the A/D terminal are processed and analyzed by LabVIEW, which can automatically identify all the locking points and output the piezoelectric ceramic transducer (PZT) scan and digital feedback through the D/A terminal. The experimental results show that the system can lock to six different frequencies separately and realize automatic relocking within 3.5 s after unlocking. The system has a stability of 1.68 × 10⁻¹⁰@1 s and 4.77 × 10⁻¹²@1000 s, which meets the laboratory’s requirements for atomic interference experiments.

To achieve high-frequency stability on the external cavity diode laser (ECDL), a 780 nm ECDL serves as the seed light source, and its frequency is precisely locked to the saturated absorption peak of rubidium (Rb) atoms using modulation transfer spectroscopy (MTS) technology. For improving the performance of frequency locking, the scheme is designed to find the optimal operating conditions. Correlations between the frequency discrimination signal (FDS) and critical parameters, such as the temperature of the Rb cell, the power ratio of the probe and pump light, and the frequency and amplitude of the modulation and demodulation signals, are observed to attain the optimal conditions for frequency locking. To evaluate the performance of the frequency-stabilized 780 nm ECDL, a dual-beam heterodyne setup was constructed. Through this arrangement, the laser linewidth, approximately 65.4 kHz, is measured. Then, the frequency stability of the laser, quantified as low as 4.886 × 10⁻¹² @32 s, is determined by measuring the beat-frequency signal with a frequency counter and calculating the Allan variance. Furthermore, using the realized frequency locking technology, the 780 nm ECDL can achieve long-term stabilization even after 25 h. The test results show the exceptional performance of the implemented frequency stabilization system for the 780 nm ECDL.