A quasi-continuous-wave (QCW) laser diode (LD) driver is commonly used to drive diode bars and stacks designed specifically for QCW operations in solid-state lasers. Such drivers are optimized to deliver peak current and voltage pulses to LDs while maintaining low average power levels. As a result, they are widely used in laser processing devices and laser instruments. Traditional high-energy QCW LD drivers primarily use capacitors as energy storage components and pulsed constant-current sources with op-amps and power metal-oxide-semiconductor field-effect transistors (MOSFETs) as their core circuits for generating repeated constant-current pulses. The drawback of this type of driver is that the driver’s output voltage needs to be manually adjusted according to the operating voltage of the load before use to maximize driver efficiency while providing a sufficient current. Another drawback is its inability to automatically adjust the output voltage to maintain high efficiency when the load changes during the driver operation. Drastic changes in the load can cause the driver to fail to function properly in extreme cases. Based on the above traditional circuit structure, this study designed a stability compensation circuit and realized a QCW LD driver for driving a GS20 diode stack with a maximum repetition rate of 100 Hz, a constant current of approximately 300 A, a load voltage of approximately 10 V, and a pulse width of approximately 300 s. In particular, a high-efficiency, load-adaptive driving method was used with the MOSFETs in the critical saturation region (i.e., between the linear and saturated regions), controlling its power loss effectively while achieving maximum output current of the driver. The experiments demonstrated that the driver efficiency could be maintained at more than 80% when the load current varied from 50 to 300 A.
A Pockels cell driver (PCD) can be viewed as a high-voltage pulse width generator for controlling the bi-refringence effect of electro-optical crystals. The main features of a PCD include a high repetition rate, fast on and off switching, variable pulse duration, and a true square pulse shape. The most commonly used PCD has a narrow pulse width tuning range, typically within a few microseconds. In this paper, we propose a PCD based on a novel pulse width modulation (PWM) signal-generation strategy that can continuously adjust its pulse width with a minimum step size of 10 ns and no restriction on the maximum width. Therefore, it is easily compatible with both “On-type” and “Off-type” applications of the electro-optic crystal quarter-wave voltage. The experimental results show that the rising and falling times of the proposed PCD are approximately 7.3 ns and 7.8 ns, respectively, with a maximum repetition rate of 1 MHz and a maximum voltage of approximately 2.0 kV. Finally, the functionality of the PCD is demonstrated in a home-built slab laser.
This paper investigates an event-triggered framework for addressing fault estimation and fault tolerance issues in discrete-time cyber-physical systems (CPSs) with partial state saturations and random false data injection attacks (FDIAs). A stochastic variable is introduced to characterize the random FDIAs and to establish the corresponding model. A reduced-order fault estimator and an event condition are co-derived to reconstruct system states and actuator faults. The proposed event-triggered transmission scheme helps reduce network utilization in the sensor-to-estimator channel. A sufficient condition for the proposed event-triggered estimator is derived, which minimizes state and fault estimation errors even when the controlled plants are subject to exogenous disturbances, fault signals, and random attacks. Furthermore, a fault-tolerant compensation controller is proposed using the estimated states and faults, ensuring that the considered systems achieve mean-squared stability. Finally, a DC motor platform is developed to further demonstrate the effectiveness of the designed estimator-based fault-tolerant controller.
In modern industrial applications, production quality, system performance, process reliability, and safety have received considerable attention. This article proposes a dynamic event-triggered attack estimator for Markovian jump stochastic systems susceptible to actuator deception attacks. Utilizing the developed estimator, the presented attack-tolerant control strategy can tolerate the effects of such attacks and ensure the mean-square convergence of the overall closed-loop system. A dynamic event-triggered mechanism is implemented on the sensor side to optimize communication efficiency. To address the potential threat of deception attacks, a plug-and-play (PnP) secure monitoring and control architecture is introduced. This architecture facilitates the seamless integration of the designed attack-tolerant controller with the nominal feedback controller, thereby enhancing system security without requiring significant modifications to the existing control structure. The practicality and effectiveness of the proposed approaches are demonstrated through experimental results on a switched boost converter circuit.
We demonstrate a compact, partially end-pumping Innoslab laser based on a micro-cylindrical lens array homogenizer. A dimension of 12 × 0.4 mm2 flat-top pumping line with a Gaussian intensity distribution across the line was simulated by the ray tracing technique. The rate equations considering the asymmetric transverse spatial distributions are theoretically developed. The simulation results are in good agreement with the experimental results. Preliminary data shows that for a pump power of 260 W, a maximum pulse energy of 15.7 mJ was obtained with a pulse width of 8.5 ns at a repetition frequency of 1 kHz. The beam quality M2 factors in the unstable and stable directions were 1.732 and 1.485, respectively. The technology has been successfully applied to temperature and humidity profiling lidar and ozone lidar and has been productized, yielding direct economic value.
Driven by the rapid development of modern industrial applications, multi-agent systems (MASs), integrating computational and physical resources, have become increasingly important in recent years. However, the performance of MASs can be easily compromised by malicious false data injection attacks (FDIAs) due to the inherent vulnerability of the cyber layer. This work focuses on an event-triggered framework for secure reconstruction and consensus control in MASs subject to both sensor and actuator attacks. First, we introduce a class of Takagi–Sugeno fuzzy multi-agent systems that relax the traditional Lipschitz condition and incorporate realistic system dynamics by considering parameter variations governed by Markovian jump principles. Second, an adaptive fuzzy estimator is developed for the simultaneous reconstruction of states and attacks in MASs. The derived estimates are utilized to design an attack-resilient consensus control strategy that compensates for the effects of FDIAs on the closed-loop consensus error dynamics. Meanwhile, the sufficient conditions for the convergence of both estimation and consensus errors are presented and rigorously proved. Finally, evaluation results on an experimental platform through multiple truck-trailer systems are provided to demonstrate the effectiveness and performance of the proposed approach.