This paper presents the development of life-sized high-power humanoid robot JAXON. Humanoid robots for disaster relief assistance need the same degree of physical performance as humans. We have developed STARO as the high-power humanoid robot with a high degree of physical performance. However this is not enough for practical use of the humanoid robot in a disaster site. We consider the following as additional conditions to operate humanoid robots for disaster relief assistance outside of the lab in outdoor environments. 1) Robots have humanlike body proportion to work in infrastructure matched to human body structure. 2) Robots have energy sources such as batteries and act without tethers. 3) Robots walk with two legs or four limbs and continue to work without fatal damage in unexpected rollover. JAXON satisfied these conditions. We demonstrates the performance of JAXON through the experiment of getting out of a vehicle, stepping over walls, and operating on batteries. Further more, we assesses the performance of the strong armor and the shock absorbing structure through a backward over-turning accident.

In this paper, we introduce the achievement of the aerial manipulation by using the whole body of a transformable aerial robot, instead of attaching an additional manipulator. The aerial robot in our work is composed by two-dimensional multilinks which enable a stable aerial transformation and can be employed as an entire gripper. We propose a planning method to find the optimized grasping form for the multilinks while they are on the air, which is based on the original planar enveloping algorithm, along with the optimization of the internal force and joint torque for the force-closure. We then propose the aerial approach and grasp motion strategy, which is devoted to the determination of the form and position of the aerial robot to approach and grasp effectively the object from the air. Finally we present the experimental results of the aerial manipulation which involves grasping, carrying and dropping different types of object. These results validate the performance of aerial grasping based on our proposed whole-body grasp planning and motion control method.

A multirotor with two-dimensional multilinks is proposed to perform aerial transformation and aerial manipulation. First, a modular link structure that comprises a multirotor with a reliable internal communication system was initially developed. Second, a flight control method was further introduced on the basis of linear–quadratic–integral optimal control for aerial transformation. A relaxed hovering solution that neglects the yaw motion stability is proposed to enable stable flight under a certain singular form. Third, the transformable robot was employed as an entire gripper with regards to grasping to perform the whole-body aerial manipulation. A grasp-form searching method was developed to optimize hovering thrust force and joint torque under force-closure grasp, and was followed by an aerial approach and grasp-motion strategy to fulfill the resulting desired grasp form. Finally, experimental results demonstrate the stable aerial transformation as well as the feasibility of the whole-body aerial manipulation system to grasp and carry different types of objects.

In case that a robot carries large and heavy objects with unknown physical parameters such as mass automatically, the autonomous decision and execution of the manipulation strategy are necessary. The method to decide the proper strategy from the various candidates depending on the object is a difficult problem and not researched widely. We consider the operation as the mapping from the physical parameter space to the object motion space. Based on the concept of mapping, we define the strategy proving operation (SPO) for determination of strategy feasibility. We introduce two examples of SPO and construct the system for deciding strategy from lifting, pushing, and pivoting. Executing the strategy in the situation that physical parameters are not known is also necessary. We construct the generator and controller for the full-body manipulation, which can be employed regardless of strategy. The controller enables the robot to exert adequate force while keeping balance. We clarify the applicable scope of the proposed method and show that a life-sized humanoid decides the strategy and carries various large and heavy objects autonomously through the experiment.

This paper presents Team NEDO-JSK's approach to the development of novel humanoid platform for disaster response through participation to DARPA Robotics Challenge Finals. This development is a part of the project organized by New Energy and Industrial Technology Development Organization. Technology for this robot is based on the recent research of high-speed and high-torque motor driver with water-cooling system, RTM-ROS inter-operation for intelligent robotics, and generation of full-body fast dancing motion, due to the generic 10 year's research of HRP-2 as a platform humanoid robot. Development target is the robot support in a variety of unsafe human tasks teleoperated by humans in case of a disaster response, equipped with body structure capability for use of human devices and tools in human environment, performance for dynamic full-body actions covering human-sized speed and power, and basic function for intelligent and integrated robot platform system for performing various tasks independently. we also describes NEDO-JSK team's approach to design methodology for robot hardware and architecture of software system and user interface for DRC Finals as a test case of disaster response.