Tetracycline has received a great deal of interest for the harmful effects of substance abuse on ecosystems and humanity. The effects of different processes on the degradation of tetracycline were compared, with dual-frequency ultrasound (DFUS) in combination with peroxymonosulfate (PMS) being the most effective for the tetracycline degradation. Free radical scavenging experiments showed that O2∙-,SO4∙- and •OH were the main reactive radicals in the degradation of tetracycline. According to the major intermediates of tetracycline degradation identified, three possible degradation pathways were proposed, which are of significance for translational studies of tetracycline degradation. Notably, these intermediates were found to be significantly less toxicity. The number of active bubbles in the degradation vessel was calculated using a semi-empirical formula, and a higher value of 1.44 × 108 L-1s-1 of bubbles was obtained when using dual-frequency ultrasound at 20 kHz (210 W/L) and 80 kHz (85.4 W/L). Therefore, compared to 20 kHz, although the yield of strong oxidizing substances from individual active bubbles decreased slightly, a significant increment of the number of active bubbles still resulted in a higher synergistic effect, and the combination of DFUS and PMS should be effective in promoting the generation of reactive free radicals and mass transfer processes within the degradation vessel, which provides a method for efficient removal of tetracycline from wastewater.
Self-assembled mesoporous BiOI microsphere with nanosheets were prepared by a solvothermal method and used as sonocatalysts. The sonocatalytic performances of the BiOI microspheres were evaluated in terms of the degradation rate of tetracycline hydrochloride (TCH) as a model pollutant. We designed three comparative experiments to explore the degradation of TCH solution under natural light, namely with sonication, with BiOI alone, and with ultrasound (US)/BiOI synergy. The degradation rate of TCH with US/BiOI synergy was 227 times higher than that achieved with sonication and 83 times higher than that achieved with BiOI alone. The maximum TCH degradation rate was 93.0%. The synergistic effect was therefore significant, and the synergy factor was estimated to be 61. Many factors such as the ultrasonic duty cycle, applied power, catalyst concentration, and initial TCH dye concentration may affect the ultrasonic degradation efficiency. Box-Behnken design of the response surface method were used to optimize the parameters and to study the effects of the catalyst concentration, ultrasonic duty cycle, and applied power. Analysis of variance confirmed that the quadratic response surface model for predicting the sonocatalytic efficiency was good for the corresponding parameters (R2 = 0.9936 and adjusted R2 = 0.9854). The optimization results were verified by replicate experiments. The high TCH degradation rate may be related to the generation of reactive oxygen species at the end of cavitation bubble collapse, which can improve the chemical yields.
• Bubble transportation processes in cavitation field is investigated. • A model is proposed to explain the evolution of acoustic Lichtenberg figure. • The separation distance and bubble density can affect the stability of ALF.
• The layer structure below soft boundary in cavitation field were investigated experimentally. • A simplified model is proposed to explain the formation mechanism of layer cluster. • The morphology and position of layer structure is closely related to acoustic frequency and intensity.
Developing innovative sonoreactors to enhance acoustic processing efficiency holds immense importance in the field of sonochemistry. Traditional immersed sonoreactors (TISs) mainly produce cavitation at the probe tip, with a relatively weak cavitation around the probe, resulting in posing challenges for high-efficiency cavitation treatment. Here we propose an acoustic black hole immersed sonoreactor (ABHIS) in longitudinal-flexural coupled vibration, enabling high-efficiency cavitation treatment by unleashing the cavitation potential of the probe. The symmetrical structure of the probe is altered to introduce a coupling of flexural vibration mode, and an acoustic black hole (ABH) profile is integrated to further enhance both flexural wave number and amplitude. In this paper, we present a systematic theoretical design method for ABHIS and compare its performance with TIS using finite element method (FEM). An ABHIS prototype is fabricated and subjected to experimental tests and cavitation observation. The results demonstrate that our theoretical analysis model accurately predicts the frequency characteristics of ABHIS. The proposed ABHIS exhibits satisfactory dynamic characteristics, with significantly increased vibration displacement and acoustic radiation ability compared to TIS. Importantly, the ABH design significantly expands ultrasonic cavitation regions and enhances acoustic radiation intensity of ABHIS, resulting in a substantial improvement in acoustic processing efficiency.