In recent times, gas foil bearings have become popular for commercial use in the aircraft and space industry, turbocompressors, turbine generators and in the more complex fields of turbochargers and turboexpanders. The gain in popularity for gas foil bearings is due to their features such as contamination-free zone, wide temperature range, higher stability and higher reliability characteristics as compared to other types of bearings. However, several challenges have come across while analysing the gas foil bearing behaviour at different working conditions. The current paper presents an overview of the work done in the past few decades for developing numerical models and listing the efforts of several researchers around the world to conduct the experimental investigation for predicting and analysing thermohydrodynamic behaviour of gas foil bearings at different operating conditions. It is expected that the current paper will help readers to thoroughly understand the hydrodynamic and thermal aspects of gas foil bearings.
Gas foil bearings are often used in high-speed turbomachinery such as turboexpanders and turbochargers due to their merits over simple gas-lubricated bearings. The merits of gas foil bearings include their ability to tailor dynamic parameters such as stiffness and damping. Gas foil bearings usually have low clearance and operate at a high rotational speed, which eventually leads to velocity slip at the solid–fluid interface. This article investigates the effect of slip flow on various parameters of gas foil thrust bearings. A numerical model is formulated to predict pressure, film thickness and temperature distribution of helium lubricated gas foil thrust bearing at high rotating speed. The Reynolds equation is modified by assuming first-order slip coupled with the structural (compliant) and energy equation. The temperature-dependent viscosity and density of the fluid are also considered in the Reynolds equation to predict the thermohydrodynamic behaviour of gas foil thrust bearings. The numerical model thus developed uses a finite-difference method and the Newton–Raphson method to solve the Reynolds equation,whereas the successive over-relaxation method is used to solve the energy equation. Various performance parameters are compared for slip and no-slip conditions for gas foil thrust bearings. The results show a considerable difference between the two phenomena. Also, the conventional Reynolds equation tends to overestimate the load-carrying capacity.
7 January 2025 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
This review paper digs into the multidimensional aspects of water-lubricated bearings, emphasizing surface texture, tribological performance, and thermal effects. It looks closely at water-lubricated bearings, widely recognized as accessible and eco-friendly. In particular, the impact of surface texture on wear, friction, and overall performance are investigated. The tribological properties are analyzed to comprehend the link between bearing surfaces and lubricating water, accentuating friction, and wear reduction advancements. The review also explores the different materials used in water-lubricated bearings, assessing their chemical and mechanical attributes to determine the optimal superior composite for better performance and long-lasting. To apprehend the effects of temperature changes on performance and material integrity, the thermal behavior of these bearings is also meticulously inspected. This comprehensive review attempts to clearly understand the contemporary state of affairs and potential future directions in developing exceptional-performance water-lubricated bearings.
7 May 2024 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Gas foil journal bearings (GFJBs) are widely considered technically advanced bearings and a viable alternative to conventional rolling element and oil-lubricated bearings in high-speed rotating machinery. GFJBs offer advantages such as reduced maintenance, improved efficiency, and the ability to operate in challenging environments. A traditional GFJB consists of (i) a smooth top foil for the generation of hydrodynamic pressure, (ii) a compliant corrugated foil beneath the top foil for tailoring stiffness, and (iii) a bearing base to hold the foils together. The shape and geometry of corrugated thin foil are primarily designed for the essential stiffness and load-carrying capacity of the bearings. The thickness of thin foils is in the range of 100–150 μm. The fabrication of complaint thin foils to their desired shapes and sizes is quite challenging. Engineers and researchers around the world have designed and published various advanced design structures of GFJBs to improve their static and dynamic characteristics. The corrugated or compliant structure is the most significant component of GFJBs from design and fabrication point of view. Therefore, a modest attempt is made by the authors to review and report systematically on various foil journal bearings reported in open literature. The study covers four primary categories, which are centered around the design of compliant structures, materials, manufacturing processes, and coatings over the years. By analyzing the state-of-the-art advancements, this review aims to identify key areas for further research, explain technological trends, and underline the pivotal role of GFJBs in various high-speed applications across industries.
Gas foil bearing rotor (GFBR) systems have received significant interest in the field of rotordynamics and vibration analysis. GFBR systems have a wide range of high-speed turbomachinery applications. Due to the high speed, these machines are susceptible to rigorous vibration and instability. Gas foil bearings instigate large amplitude of vibrations at startup and shut down and severe subsynchronous motions during high-speed operations. Over the years, numerous work has been done in the field of high-speed rotors supported on gas foil bearings. Significant improvement has been observed in the stability and feasibility of the GFBR systems. However, accurate model predictions of gas foil bearing still remain a challenge for its widespread usage in high-speed turbomachinery. A comprehensive review needs to be done to study the previous work and pave the way for future research. The current review is majorly divided into three sections. Firstly, various models used for the performance prediction of gas foil bearings are compiled. After that, major causes of instability that manifest during the experiments and practice with gas foil bearing supported rotors is illustrated. Lastly, the developmental attempts made to inhibit the instability is summarised. This paper presents an overall picture of the current engineering scenario and future prospects of the GFBR systems.