Rotors are often coupled with a stationary part by rolling element bearings. To suppress their excessive vibration, the bearings are inserted in squeeze film dampers. The control of damping in the support elements offers the possibility to minimize the oscillation amplitude of accelerating or decelerating rotors, passing the regions of critical speeds. The controllable damping effect can be achieved if the squeeze film dampers are lubricated with magnetorheological oil. The change in the applied current feeding the electric coil changes magnetic induction in the damper gap, which changes the oil damping properties. The minimum vibration amplitude of the rotor running up or down through the resonance area is accomplished if the current increase or decrease is not sudden, but if it is distributed in some time interval. This article concentrates on determination of the optimum parameters of this manipulation. The developed procedure leads to solving an unconstrained optimization problem with the implicit objective function. The evolution method was used for its solving. In the investigated case, the proposed procedure made it possible to reduce maximum vibration amplitude by about 40% compared with the uncontrolled current decrease. The main contribution of the conducted research work is presentation of a new and original procedure for controlling the damping effect in the rotor supports. It provides a new idea to the designers and engineers regarding how to minimize amplitude of the rotor vibration when passing the critical speed. In addition, the article points to a new area of utilization of controllable magnetorheological squeeze film dampers.

Real-world rotordynamic systems exhibit inherent uncertainties in manufacturing tolerances, material properties, and operating conditions. This study presents a Monte Carlo simulation approach using MSC Adams View and Adams Insight to investigate the impact of these uncertainties on the performance of a Laval/Jeffcott rotor model. Key uncertainties in bearing damping, bearing clearance, and mass imbalance were modeled with probabilistic distributions. The Monte Carlo analysis revealed the probabilistic nature of critical speeds, vibration amplitudes, and overall system stability. The findings highlight the importance of probabilistic methods in robust rotordynamic design and provide insights for establishing manufacturing tolerances and operational limits.

The article deals with the computational study of the rigid rotor coupled with squeeze film dampers. Various techniques such as the method of computation of the synchronous response with a circular centred orbit, the harmonic balance method, and the direct time integration method are used to analyse the nonlinear behaviour of the rotor system. The results indicate that the rotor system can exhibit both a synchronous circular response with a large orbit radius and a nonsynchronous response with a quasiperiodic character. However, both responses are undesirable in rotating machinery and should be avoided. The new results are presented to provide insight into the impact of initial conditions on the vibration response via basins of attraction. The simulations show that: (i) the basins of attraction are more sensitive to the choice of the initial velocities than displacements, (ii) the basins of attraction are noticeably dependent on the rotor speed in the region of a nonsynchronous response, and (iii) the border between the basins of attraction can be smooth or without a clear structure. The research brings clear conditions defined by parameters such as the dimensionless SFD constant, unbalance, and rotational speed for the suppression of undesirable nonlinear phenomena. The results suggest that the damper can effectively improve the vibration response of high-speed rotating machinery, but its design must be chosen appropriately.