Empirical observations have shown that lithium deposition occurs preferentially at electrode edges and that extending the negative electrode beyond the edge of the positive by approximately can prevent deposition from occurring. In this work, we use a simplified COMSOL Multiphysics model to explain this behavior and to investigate the conditions under which deposition occurs, paying particular attention to the magnitude of edge effects. Model results show that geometric effects generate overpotential at the edge of the electrode and create conditions which favor plating, despite unused capacity in the center of the electrode. Extending the negative electrode beyond the edge of the positive provides excess capacity where it is needed and prevents deposition from occurring before the cutoff potential is reached. Under the assumptions of this model, an extension of is sufficient to prevent the onset of lithium deposition until after the cutoff potential is reached.
The development of high-performance and cost-effective electrodes for oxygen evolution and oxygen reduction is critical for enabling the use of energy storage devices based on O2–H2O chemistries such as metal–air batteries and unitized regenerative fuel cells (URFCs). Herein, we report a precious-metal-free and carbon-free O2 electrode synthesized via electrodeposition of manganese oxide (MnOx) on a stainless steel (SS) substrate followed by high-temperature calcination at 480 °C. The MnOx–SS electrode displays high oxygen reduction and water oxidation activities when tested in an electrochemical cell, comparable to that of a precious-metal based electrode, Pt/C–SS. Accelerated durability testing reveals the excellent stability of the MnOx–SS electrode compared to both the Pt/C–SS electrode and a carbon-based electrode with MnOx and Ni catalysts. This can be rationalized by the carbon-free nature of the MnOx–SS electrode which circumvents carbon corrosion at the high electrochemical potentials during water oxidation and O2 reduction. Integrating the MnOx–SS electrode as the O2 electrode into an anion exchange membrane (AEM) URFC produces round-trip efficiencies of 42–45% at 20 mA cm−2 over 10 cycles, and exhibits significantly enhanced durability compared to the carbon-based analogue. This work demonstrates the MnOx–SS electrode's potential for use as a high performance, scalable, precious-metal-free and carbon-free O2 electrode in AEM-URFCs and metal–air batteries.