Although carbon fiber-reinforced polymer (CFRP) composites have excellent intrinsic mechanical properties, they are vulnerable to impact loads because of their weak inter-laminar fracture toughness, which results in delamination damage. This study presents a novel hybrid nanofiller combination of multi-walled carbon nanotubes (MWCNT) and alumina nanoparticles (Al2O3) to determine improvements in the impact resistance of CFRP laminate. The projectile impact experimental study is carried out on 140 mm × 140 mm × 1.5 mm CFRP laminate with spherical and conical nose shape projectiles. The numerical study of the test plate consisting of six layers is performed, in which each layer is modeled using a shell element and connected through tiebreak contact. Using the Cowper–Symonds equation to determine the dynamic mechanical properties, the numerical validation is established considering the strain rate effect. The results, such as residual velocity, damage area, ballistic limit velocity and delamination obtained from numerical analysis, are compared with the experimental observations. In laminates with hybrid nanofillers, residual velocity decreased by 20% and 9% when spherical and conical projectiles were impacted, respectively. The study indicates that 0.1 wt% MWCNT + 1 wt% Al2O3 nanofiller concentration embedded CFRP offers better resistance against spherical and conical projectile impact.
The present paper aims to explore the performance of composite shear walls reinforced with Fiber Reinforced Polymer (FRP) sheets, subjected to blast loads. The finite-element method (FEM) implemented in the ABAQUS software is used to evaluate several numerical models to meet this objective. The parametric behavior of the system under the effect of blast load intensity was investigated, along with the FRP sheet material, concrete compressive strength, and also the geometric characteristics of wall components such as its thickness, spacing of FRP sheets, and thickness of the cross-sectional shape of the steel plates under the effect of blast load. It was found that the reinforcement of the composite shear wall by incorporating FRP sheets not only increases the stress absorption in the wall but also increases the load transfer capacity and leads to high energy dissipation using the polymer fibers. It has been found that carbon polymer sheets (CFRP) and glass polymer sheets (GFRP) have, respectively, the best and the weakest performance in shear wall stress absorption compared to AFRP sheets, and this is due to the tensile strength and low density of CFRP sheets. As the thickness of FRP sheets increases, the stress, strain and displacement created in the composite shear wall decrease, owing to the increase of the final strength, which is, in turn, the result of the increase in fiber thickness.
Nanoparticle-reinforced hybrid composites have emerged as promising candidates for lightweight structural applications requiring improved mechanical and thermal performance. Kevlar–Basalt fiber systems, in particular, offer a balance of strength, durability, and cost-effectiveness. This work investigates the effect of Al 2 O 3 nanoparticle incorporation on Kevlar–Basalt hybrid laminates. Six laminate configurations, including pure Kevlar, pure Basalt, Kevlar–Basalt hybrid, and hybrids reinforced with 0.5 %, 1 %, and 1.5 % Al 2 O 3 , were fabricated and tested according to ASTM standards. Mechanical characterization included tensile, compressive, and interlaminar shear tests, while thermo-mechanical behavior was assessed using DMA and TGA. The findings demonstrate that 1 % Al 2 O 3 incorporation yields the most favorable performance, with notable improvements in strength, interlaminar adhesion, and thermal stability compared to other variants. These results suggest that optimized Kevlar–Basalt/Al 2 O 3 hybrid composites are suitable for demanding engineering applications such as aerospace and lightweight armor structures, where mechanical integrity and heat resistance are essential.
This work focuses on the numerical investigation of the ballistic and delamination mechanisms of T700 carbon fibre/epoxy laminate with a [0/90]s stacking sequence. The effect of the mass and diameter of spherical projectiles on CFRP laminate is investigated numerically. A numerical study of projectiles with different diameters (6mm, 10 mm, and 12mm) on CFRP laminates with thicknesses of 1.5mm and 3mm is conducted, encompassing a broad spectrum of projectile incident velocities (from 500 m/s to 1700 m/s). Furthermore, a numerical model containing cohesive elements is developed and verified using experimental results from the literature. When compared to experimental results, the numerical simulation results were found to be within acceptable ranges. On comparing the effect of laminate thickness, it was determined that 1.5mm laminates had better energy absorption capability as velocity increased compared to 3mm laminates. The results indicated that the energy absorption capability of the 3mm laminate was reduced by 8.8%, whereas the 1.5mm laminate was reduced by 3%. A study using multi-layered laminate is studied, and a parametric study is carried out with projectiles of different mass and size. The results from the parametric study concluded that smaller geometry projectiles induced more significant damage in the laminate than larger geometry projectiles with constant mass.
1 January 2026 in REVIEWS ON ADVANCED MATERIALS SCIENCE
Glass fibre-reinforced sandwich composite laminates with 3D-printed polylactic acid (PLA) cores were fabricated to investigate the effect of nanoparticle-modified epoxy matrices on physical, mechanical, and environmental performance. Three laminates (GF/GF/GF/PLA/GF/GF/GF) with identical stacking sequences were prepared using a hand lay-up process, incorporating aluminium oxide (Al 2 O 3 ) and reduced graphene oxide (rGO) nanoparticles at 1 wt% into the epoxy matrix. The laminates were evaluated through density measurement, moisture absorption, tensile, compression, and impact testing. Results show that nanoparticle incorporation significantly enhances mechanical performance. The rGO-reinforced laminate exhibited the highest tensile strength (∼166 MPa) and compressive strength (∼122 MPa), representing improvements of approximately 5–17 % compared to the baseline laminate. In contrast, the Al 2 O 3 -reinforced laminate demonstrated superior impact energy absorption due to particle-induced energy dissipation mechanisms. Moisture behaviour analysis indicates that nanoparticle addition improves resistance to moisture diffusion and environmental degradation, although slight variations in absolute moisture uptake were observed. Overall, the combined use of a 3D-printed PLA core and nanoparticle-modified epoxy matrix provides an effective approach for enhancing the structural performance and durability of sandwich composites.