Sipeng Zhu

Dr. Sipeng Zhu


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 March 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XXXuanyu Xiao
Xuanyu Xiao
HDHuaiwei Dong
Huaiwei Dong
HDHuaiwei Dong
Huaiwei Dong
YTYujun Tang
Yujun Tang
JFJinfeng Feng
Jinfeng Feng
GLGuoxiang Li
Guoxiang Li
Fuel economy and system durability are critical yet interdependent performance metrics for fuel cell hybrid vehicles (FCHVs). This paper devises an integrated framework for optimizing component sizing and energy management in a fuel cell/battery hybrid passenger vehicle. A unified cost function is proposed, combining fuel economy and system durability through a weighting coefficient, based on a comprehensive model of the hydrogen consumption and degradation characteristics of fuel cells and batteries. Utilizing the dynamic programming (DP) algorithm, the total cost is optimized to derive the optimal weighting factors and component sizing, effectively addressing the multi-objective optimization problem and balancing efficiency and durability. Furthermore, the impact of power prices on the optimal parameters is carefully examined. The simulation results indicate that a battery capacity of 44 Ah and a fuel cell maximum power of 80 kW represent the optimal sizing configuration. A weighting factor of 0.5 achieves the minimum equivalent total cost by effectively balancing fuel economy and system durability for the light-duty fuel cell passenger vehicle. Additionally, the battery price affects the weighting factor, indicating that future reductions in power source costs will shift focus away from system durability to fuel economy in FCHV optimization. These findings provide recommendations for FCHV manufacturers to advance the application of fuel cells in passenger vehicles.

5 December 2024 in Energy
Verified
Journal Article
Closed access
Hao YuanHao Yuan
Hao Yuan
HGHarsh Goyal
Harsh Goyal
RIReza Islam
Reza Islam
KGKarl Giles
Karl Giles
SHSimeon Howson
Simeon Howson
Sipeng ZhuSipeng Zhu
Sipeng Zhu

Verified
Journal Article
Open access
PDF file
JFJinfeng Feng
Jinfeng Feng
YGYuncheng Gu
Yuncheng Gu
SHShengjun Han
Shengjun Han
XZXunhu Zhao
Xunhu Zhao
YTYujun Tang
Yujun Tang
GWGuihua Wang
Guihua Wang
Waste heat recovery using Organic Rankine Cycle (ORC) systems shows significant potential for reducing CO2 emissions from ships. This study designs and analyzes ORC systems for recovering multi-grade waste heat from the exhaust gas, jacket water, and scavenging air of a marine two-stroke diesel engine. A thermodynamic model is developed to investigate the effects of working fluid preheating temperature, evaporation pressure, and heat source conditions on system performance. Results show that appropriately increasing the preheating temperature of the working fluid can enhance power output. For hydrocarbons with higher critical temperatures, power output exhibits an extremum as preheating temperature increases, while for fluids with lower critical temperatures, power output increases continuously until the evaporation pressure limit is reached. Increasing evaporation pressure decreases power output but improves thermal efficiency, with a corresponding increase in heat transfer and exergy loss rates in the exhaust gas preheater. Additionally, the temperature of the heat source has an important effect on the energy and exergy balance distribution and power output of the ORC. For every 10 K rise in exhaust temperature, the bottoming cycle power output of cyclohexane increases by approximately 12.3%. This study provides theoretical support for efficient marine waste heat recovery and working fluid selection.

18 April 2023 in Processes
Verified
Journal Article
Open access
PDF file
LDLi Da
Li Da
Sipeng ZhuSipeng Zhu
Sipeng Zhu
GZGuodong Zhang
Guodong Zhang
ke Sunke Sun
ke Sun
SBShuzhan Bai
Shuzhan Bai
HCHao Cheng
Hao Cheng
Improving the thermal efficiency of truck diesel engines requires comprehensive optimization of the engine, exhaust aftertreatment (EAT), and possible waste heat recovery (WHR). Lower exhaust temperature at mid and low working points has caused difficulty in both emission clarification and heat recovery, which requires thermal management. Based on the diesel engine bench test and separate bench tests, this paper focuses on the thermal management strategy optimization, to increase the exhaust temperature at lower working points and optimize the thermal efficiency of the whole system. The test and numerical analysis showed that as exhaust temperature increased from 200~250 °C to 300~350 °C, soot passive regeneration reactions were enhanced, nitrogen oxide emission decreased, and energy recovery was improved. Moderate throttle valve adjustment coupled with early post injection could effectively achieve the required temperature increase. The optimized thermal management strategy increased the fuel consumption rate by no more than 1%. Meanwhile, the WHR system output increased significantly, by 62.55% at a certain mid–low working point. System CO2 emission decreased by an average of 5.4% at selected working points.

14 May 2025 in Energy
Verified
Journal Article
Closed access
YTYujun Tang
Yujun Tang
JLJinbao Liu
Jinbao Liu
MLMin Liu
Min Liu
JFJinfeng Feng
Jinfeng Feng
KDKangyao Deng
Kangyao Deng
GLGuoxiang Li
Guoxiang Li

1 July 2025 in Thermal Science and Engineering Progress
Verified
Journal Article
Closed access
JFJinfeng Feng
Jinfeng Feng
CRChongchong Ren
Chongchong Ren
JLJinbao Liu
Jinbao Liu
YTYujun Tang
Yujun Tang
SBShuzhan Bai
Shuzhan Bai
Sipeng ZhuSipeng Zhu
Sipeng Zhu