Floods are a natural phenomenon that cause damage to structures and property as well as negatively affect human life. Assessing the extent, speed, power, and depth of flooding has always been a challenge for water resource planners. This research developed a hydraulic simulation model for the Cubanicay and Bélico urban rivers embedded in the city of Santa Clara, Cuba. The methodology was based on a one-dimensional model of the Hydrological Engineering River Analysis System (HEC-RAS) and GIS-based methods. The HEC-RAS model (Beta) and three modeling flood tests for scenarios of 1% (100 years), 2% (50 years), and 10% (10 years) of probability for hydrometeorological events were analyzed. Bank lines, flow path lines, and cross-section cut lines were extracted from Digital Elevation Models. Manning’s roughness coefficients were considered for the channel morphology and soil typology. The flood Beta model results were accurate with a difference of ±0.10 m considering the water footprint found in the field. The results showed that the areas near the control section 2 + 87 presented a high risk of flooding. The flood limit map for urban areas could be an important tool for researchers, planners, and local governments for risk assessment and to develop evacuation plans and flood mitigation strategies in order to reduce human and economic losses during a flood.
The concentration time is an essential parameter for the use of the rain-runoff models that obtain the maximum runoff expense at a point in a basin. There are various empirical formulas for its estimation worldwide, despite this, there is no general rule when choosing the appropriate one. In the present work, formulas used in the calculation of this parameter were compared from the urban basin of the Bélico river in the city of Santa Clara with the closing point in the city's North Ring Road. A balance was made of the results obtained and criteria were issued about the advantages and disadvantages of the methods described. A threshold of the maximum and minimum values of each empirical formula used was proposed, which allowed future considerations in projects to rectify the urban riverbed and its associated urban stormwater drainage.
En el presente trabajo se hace la evaluación y el análisis de tres tipos de geometría de filtros para evaluar el riesgo de las filtraciones en el Embalse Zaza, a partir de las características históricas de las fluctuaciones de niveles de agua dentro de la presa de tierra. El trabajo se basa en la experiencia de un equipo multidisciplinario e investigación previa con modelos bidimensionales usando el Método de los Elementos Finitos en la solución de problemas básicos en la ingeniería. También se evalúan los resultados de la colocación del nuevo sistema de filtros con un indizado geoespacial (bajo los criterios de: amenaza, vulnerabilidad y riesgo) con datos espaciales de visualización en un Sistema de Información Geográfica para la generación de mapas temáticos que representan cuanto varía el nivel del agua en el interior de la cortina a partir de los diferentes tipos de filtros evaluados.
La Geometría Fractal es una nueva manera de ver la matemática en la naturaleza. En la actualidad tiene un notable aumento en cuanto a su desarrollo teórico y aplicado, mostrando ser idónea para describir los procesos naturales. Por tanto, en el presente trabajo se presenta como una herramienta para agilizar el proceso de actualización cartográfica aplicada a objetos naturales y antrópicos. A partir del algoritmo Box-Counting, se determina la dimensión fractal Box-Counting de los objetos naturales para utilizarla como un índice espacial de comparación que describe la capacidad que tiene un objeto de variar en el espacio a través del tiempo, y poder determinar así la necesidad de llevar a cabo la actualización cartográfica o no. Se verifica mediante un ejemplo real que el resultado obtenido es significativo tras la ocurrencia de eventos extremos y se infiere su utilidad para realizar una actualización cartográfica parcial de la zona afectada, lo cual reduce costos en el proceso cartográfico
The evaluation, analysis and deformations forecast in the Turbo Generator 5 of the water heater-energy plant of Nuevitas, it was the main objective of this research. For they were carried out it chronologically geodesic surveying to establishment control record distributed in same time period to specific marks along the structure. These data were used in the physical-numeric models, by Finite Elements Method, it allowed evaluate the load-deformation process and floor-structures interaction. After achieving the historical record of stress-strain plane state, forecast deformations was proposing for the support structure by Arima’s models to evaluate in short term the not-alienations permissible future registered systematically in the axes of the mechanical system rotors in the plant.
Reviews recommendation: Do not publish. The decimal units must be a comma, not a point, as IU set default. You have to fix this requirement in all the documents. It’s not the correct grammatical form; use a paragraph with more than 10 lines to comme...