In recent years, air emergency rescue capabilities have become increasingly important as an indicator of national comprehensive strength and development status. Air emergency rescue performs an indispensable role in addressing social emergencies by virtue of its fast response capabilities and extensive coverage. This vital aspect of emergency response ensures the timely deployment of rescue personnel and resources, enabling efficient operations in diverse and often challenging environments. To enhance regional emergency response capabilities, this paper presents a novel siting model that overcomes the limitation of single-objective approaches by integrating multiple objectives and considering the synergistic effects of network nodes, and the corresponding efficient solving algorithm is designed for this model. First, a multi-objective optimization function is established that fully incorporates the construction cost of the rescue station, response time, and radiation range. A radiation function is developed to evaluate the degree of radiation for each candidate airport. Second, the multi-objective jellyfish search algorithm (MOJS) is employed to search for Pareto optimal solutions of the model using MATLAB tools. Finally, the proposed algorithm is applied to analyze and verify the site selection for a regional air emergency rescue center in a certain region of China, and ArcGIS tools are used to draw the site selection results separately by prioritizing the construction cost under different numbers of site selection points. The results demonstrate that the proposed model can achieve the desired site selection goals, thus providing a feasible and accurate method for future air emergency rescue station selection problems.
It was a key procedure that the location selection of airport should be scientific and reasonable; this may make a great contribution towards the regional economic environment and also be very important to the construction of comprehensive transport system. So evaluation index system of the location selection of airport was based on technical indicators, economics, environmental impact and social significance. Experts adopted the weighted least-square method (WLSM) to calculate the weight of index. The linguistic variables figures were used to translate evaluation indexes from qualitative to quantitative, then the evaluation indexes of decision matrix was pooled and integrated. TOPSIS was introduced into this paper which can calculate the distance between two triangular fuzzy numbers. By calculating the distances to both the fuzzy positive-ideal solution and fuzzy negative-ideal solution synchronously, the degree of closeness was defined to estimate the ranking order of all alternatives. The scientific foundation for the decision-making of the location selection of airport had been provided by this mode.
3 March 2022 in Mathematical Problems in Engineering
At present, the study of comprehensive transportation corridors primarily focuses on the planning and construction of transportation corridors. There are few studies on the coordinated operation of all modes of transportation after the construction of the transportation corridor is completed. Comprehensive transportation corridor takes on the characteristics that the volume of transport demand and supply is large, the number of transportation modes is not only one, and competition among different transportation modes is fierce. In order to prevent unhealthy competition among different transportation modes from disrupting the transportation market, this paper takes the passenger transportation modes within the intercity comprehensive transportation corridor as the studied object and establishes a coordination model for them. The model introduces the disaggregate model as the research theory, takes the quantizable attributes of transportation modes as the decision variables, takes the reasonable distribution of passenger flow among different transportation modes as the objective function, and takes the supply capacity of different transportation modes and the reasonable value range of decision variables as the constraints. This model is a multiobjective nonlinear programming problem. The multiobjective genetic algorithm is designed to solve the model. The real number encoding method is adopted to encode the decision variables; the penalty function method is used to eliminate the solutions that do not meet the nonlinear constraints after crossover and mutation; the repairment algorithm is used to convert the solutions that do not satisfy the linear constraints and bound constraints after crossover and mutation into the feasible region. Pareto optimal solution set is obtained through continuous selection, crossover, and mutation. Finally, a numeric example is made to demonstrate that the method proposed in this paper is effective and feasible.
The aim of this paper is to explore a novel method for decision making based on triangular fuzzy number. In order to obtain the mathematical model of multi-attribute decision making (MADM) under the condition of fuzzy environment, triangular fuzzy number is introduced into MADM in this research. The entries in judgment matrix are represented by triangular fuzzy number. The final evaluation value of each alterative is achieved after normalization of judgment matrix. The degree of dominance between alternatives is defined by the way of difference of two triangular fuzzy numbers. The complementary judgment matrix expressed by crisp number is built up on degree of dominance between alternatives. The ordering vector of alternatives is figured out by using the least-square method. The order of alternatives is gained according to the value of element of the ordering vector.
20 August 2021 in Advances in Mechanical Engineering
A new two-dimensional finite element model of a lubricated contact pair, based on a contour integral, is proposed to investigate the formation of micro-pitting on gear tooth surfaces. Meanwhile, the contact properties and elasto-hydrodynamic lubrication (EHL) conditions of the gears are considered in the lubricated contact pair model. Then, the stress intensity factors (SIFs) KI and KII and the propagation angle θ C at the crack tip are analyzed by ABAQUS software. Next, the equivalent SIF Kσ can be calculated according to the maximum tangential stress (MTS) criterion, which is often used as the criterion for crack propagation. Considering the effect of a moving contact, the crack more easily propagates under the load x0/ b = −0.895. Furthermore, the pit shapes and variation of stress intensity factor are determined for various combinations of initial crack length a0 and angle β. The results show that longer germinated cracks propagate in areas that are deeper below the tooth surface. And the total length of final crack increases with the initial length and germination angle. These research results provide theoretical support for contact fatigue life analysis and meshing stiffness calculations of micro-pitting gears.
Screw ship unloaders are commonly used in wharves around the world for their advantages in efficiency compared with other unloaders. However, the unattended screw ship unloader system is under an approximate blank state at home and abroad. This article claims an unattended scheme for screw continuous ship unloaders to improve the core competitiveness of coal-fired power plants. This article includes the unattended operation process of ship unloading and discusses key technologies used to solve technical problems. In a nutshell, the unattended scheme of screw continuous ship unloader reduces the training cost for screw ship unloader drivers and provides a solution in unattended ship unloading with higher safety levels and efficiency.