We propose a practical scheme to observe the polaritonic quantum phase transition (QPT) from the superfluid (SF) to Bose-glass (BG) to Mott-insulator (MI) states. The system consists of a two-dimensional array of photonic crystal microcavities doped with substitutional donor/acceptor impurities. Using realistic parameters, we show that such strongly correlated polaritonic systems can be constructed using the state-of-art semiconductor technology.
We design and fabricate an efficient broadband grating coupler on a thick silicon-on-insulator wafer. The measured coupling loss is when coupling to a single-mode fiber at wavelength with TE polarization. The spectral FWHM and backreflection are determined to be and , respectively.
The demonstration of a 4λx10Gbps Silicon Photonics CWDM link integrating all optical components, electronics and packaging technologies required for system integration is reported. Further demonstration of the link operating at 50Gbps, 4λx12.5Gbps, is also shown.
A novel technique using surface tension to locally bond germanium (Ge) on silicon (Si) is presented for fabricating high performance Ge/Si photodiodes. Surface tension is a cohesive force among liquid molecules that tends to bring contiguous objects in contact to maintain a minimum surface energy. We take advantage of this phenomenon to fabricate a heterojunction optoelectronic device where the lattice constants of joined semiconductors are different. A high-speed Ge/Si heterojunction waveguide photodiode is presented by microbonding a beam-shaped Ge, first grown by rapid-melt-growth (RMG) method, on top of a Si waveguide via surface tension. Excellent device performances such as an operating bandwidth of 17 GHz and a responsivity of 0.66 and 0.70 A/W at the reverse bias of −4 and −6 V, respectively, are demonstrated. This technique can be simply implemented via modern complementary metal-oxide-semiconductor (CMOS) fabrication technologies for integrating Ge on Si devices.
We study the physical concept of utilizing a critical coupling to obtain a high-performance grating coupler with completely vertical emission on a silicon-on-insulator substrate. Following our design strategy, we numerically show that when our grating coupler is coupled to a standard single-mode fiber operating at 1310 nm wavelength, a −1.46 dB coupling loss, a 20 nm spectral full-width-half-maximum, and a −24 dB back reflection can be achieved at the same time without full optimization. A practical design that largely relaxes the stringent lithography requirement is also proposed and presented.