The study deals with thermal and optical properties of poly(methyl methacrylate) (PMMA) containing 2wt% calcium carbonate (CaCO3) nanofiller. It was found that the thermal conductivity increases with increasing temperatures, due to thermal activation of the phonons in the PMMA/CaCO3 nanocomposite. This enhancement in the thermal conduction is mainly attributed to the heat transferred by lattice vibrations as major contributors and electrons as minor contributors during thermal conduction. The optical properties were investigated as a function of wavelength and photon energy of UV radiation. The optical results obtained were analysed in terms of absorption formula for noncrystalline materials. It was found that the measured optical energy gap for the pure PMMA is greater than the PMMA/CaCO3 nanocomposite. The width of the energy tails of the localised states was calculated. Adding CaCO3 nanofiller into PMMA matrix may cause the localised states of different colour centres to overlap and extend in the mobility gap. This overlap may give an evidence for decreasing energy gap when adding CaCO3 nanofiller in the polymer matrix.
30 July 2008 in Journal of Physics D: Applied Physics
In this study, the effect of gamma irradiation on the optical properties of thin films of polymer electrolytes was investigated. The thin films were composed of poly(ethylene oxide) (PEO) doped with different concentrations of potassium iodide (KI) salt. The optical absorption spectrum of each film was measured using a UV–Vis spectrophotometer over a range of 300 to 800 nm. The PEO thin-film samples were subjected to gamma irradiation at two different doses of 100 and 200 Gy generated by a Co-60 source. It was found that the optical properties of the thin films were significantly influenced by the KI dopant concentration and gamma irradiation. Increasing both the KI concentration and the gamma irradiation dose resulted in a reduction in the energy gap and an increase in the absorption coefficient, extinction coefficient, refractive index, and dielectric constant of the PEO electrolyte. These findings have potential applications in the optimization of polymers for use in optical devices and energy storage systems.