Lattice light‐sheet microscopy (LLSM) was developed for long‐term live‐cell imaging with ultra‐fine three‐dimensional (3D) spatial resolution, high temporal resolution, and low photo‐toxicity by illuminating the sample with a thin lattice‐like light‐sheet. Currently available schemes for generating thin lattice light‐sheets often require complex optical designs. Meanwhile, limited by the bulky objective lens and optical components, the light throughput of existing LLSM systems is rather low. To circumvent the above problems, we utilize a dielectric metasurface of a single footprint to replace the conventional illumination modules used in the conventional LLSM and generate a lattice light‐sheet with a ~3‐fold broader illumination area and a significantly leveraged illumination efficiency, which consequently leads to a larger field of view with a higher temporal resolution at no extra cost of the spatial resolution. We demonstrate that the metasurface can manipulate spatial frequencies of an input laser beam in orthogonal directions independently to break the trade‐off between the field of view and illumination efficiency of the lattice light‐sheet. Compared to the conventional LLSM, our metasurface module serving as an ultra‐compact illumination component for LLSM at an ease will potentially enable a finer spatial resolution with a larger numerical‐aperture detection objective lens.

Light sheet microscopy has emerged as a powerful technique for three-dimensional and long-term vivo imaging within neuroscience and developmental biology. A light sheet illumination with structured light fields allows a better tradeoff between the field of view and axial resolution but suffers from strong side lobes. Here, we propose a method of producing structured light sheet illumination with suppressed side lobes by applying the superposition of two light sheets. The side lobe suppression results from the destructive interference between the side lobes and constructive interference between the main lobe of the two light sheets. In the proposed method, the incident light pattern in the rear pupil plane of the illumination objective is a combination of the incident light line beams required for the generation of the two interfering light sheets. We present a fast and simple calculation method to determine the incident light pattern in the rear pupil plane. Simulation results demonstrate the effectiveness of the proposed sidelobe suppression method for double-line light sheet, four-line light sheet, as well as line Bessel sheet. In particular, an 81% decrease in the relative side lobe energy can be achieved in case of double-line light sheet with an almost nonchanging propagation length. We show a way of using combined incident light patterns to generate structured light sheets with interference-resulted side lobe suppression, which is straightforward in design and with advantages of improved imaging performance.

Exceptional points (EPs) of non-Hermitian systems are gaining more and more attention due to their important applications in unidirectional transmitters, sensors, etc. However, theoretical studies on EPs of reflection, transmission, and absorption spectra are less available. In this paper, in the dark-bright mode-coupled plasmonic systems, the variations of EPs of reflection, transmission, and absorption spectra are numerically investigated using temporal coupled-mode theory, and an assumption is given using the representation transformation theory. The intermediate representation (IR) is firstly proposed and related to the reflection spectrum, while the normal representation (NR) is associated with the absorption spectrum. In the region far from EPs, the IR (or NR) describes the reflection (or absorption) spectrum well. Near EPs, modified formulas similar to the representation transformation theory are given. In order to verify the correctness of the assumption, two metasurfaces are designed. And the simulation results are in good agreement with the assumption and it is found in the near-infrared and visible-light band that the absorption loss of the dark mode is linearly related to the EPs of reflection, transmission, and absorption spectra, while the radiation loss of the bright mode is only linearly related to the EPs of the absorption spectrum. These laws can help to manipulate the splitting of spectral lines for reflection, transmission, and absorption by adjusting the radiation loss and absorption loss of bright mode, the absorption loss of dark mode, and the coupling coefficients between two resonant modes. This research provides a guiding scheme for the design of micro and nano photonics devices.

Baoding city locates on northwestward of the North China Plain, middle section of the Taihang Mountain which is a typical city on groundwater developing in China. Authors summarize the history of groundwater use and contributions of groundwater, analyze environmental geological issues caused by over-exploitation of urban groundwater which are similar with other water-shortage cities. Main environmental geological issues are regional lowing of groundwater table, depression cone of groundwater, land subsidence, land fractures and groundwater pollution. According to exiting issues authors also give some countermeasures on urban groundwater development and utilization.

We demonstrate that a single-layer coating on a doped GaAs or Si substrate enables broadband antireflection and, hence, broadband perfect absorption in the terahertz frequency range. This broadband behavior can be generally expected when the substrate material has a Drude-type dispersion. Our mathematical analyses show that the reflection from Drude-type material may have an anomalously dispersive phase shift. The anomalous dispersion of the reflection phase is used to compensate for the normal dispersion of the accumulation phase in the single-layer coating film. Consequently, the antireflection conditions are satisfied in a wide frequency range, and broadband antireflection is achieved. Thus, broadband perfect absorption is realized with only a single-layer coating film on the substrate. Our method provides a simple and efficient approach to achieving broadband perfect absorption, which is critical in many applications such as radar stealth techniques and solar cells.