Changqi YUE

Mr. Changqi YUE


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 November 2023 in Buildings
Verified
Journal Article
Open access
PDF file
SQSHEN Qiangru
SHEN Qiangru
JCJingcheng Chen
Jingcheng Chen
CYChangqi YUE
Changqi YUE
HCHui Cao
Hui Cao
CCChong Chen
Chong Chen
Wangping QianWangping Qian
Wangping Qian
Bridges are generally affected by thermal loads which include the daily cycle, seasonal cycle and annual cycle. Thermal loads mode and thermal effects on bridges, especially for concrete girders, are quite essential but complicated. To investigate the temperature field and thermal stress in the thickness direction of a concrete box girder, the temperature field of a prestressed concrete continuous box girder bridge is monitored, and the temperature distribution in the thickness direction of the concrete box girder is analyzed. Finite element simulation, utilizing air elements specifically designed for concrete box girders, is employed to analyze the temperature field and thermal stress profiles along the thickness of the slab. The findings indicate a variation in temperature along the thickness of the concrete box girder slab. The most significant temperature differential, reaching up to 10.7 °C, is observed along the thickness of the top slab, followed by the bottom plate, with the web exhibiting relatively smaller differentials. Temperature in the full thickness range has a significant impact on the top plate, while the web plate and bottom plate are greatly influenced by temperature ranging from the outer surface to the center of the plate thickness. The temperature difference between the center of the plate thickness and the inner surface is approximately 0. The variation in temperature due to the variation in thickness direction is a temporal factor, wherein the outer layer of the roof is primarily compressed, while the inner layer is subjected to tension. The external surface of the web is mainly compressed. The stress exerted by the internal surface temperature is minimal. The internal and external surface effects of the floor are similar, and as time passes, tensile and compressive stresses appear.

12 May 2023 in Buildings
Verified
Journal Article
Open access
PDF file
LPLong Piao
Long Piao
JYJianfeng Yuan
Jianfeng Yuan
NMNiujing Ma
Niujing Ma
CYChangqi YUE
Changqi YUE
RWRonghui Wang
Ronghui Wang
GZGangbing Zheng
Gangbing Zheng
The large-amplitude fluctuations of ultrasound in high-energy ultrasonic stress relieving cause the crystal grains or lattices in the high residual stress zone to vibrate or creep alternately. This triggers secondary effects such as ultrasonic softening and dislocation movement. The sound field also produces periodic shock waves or intermittent shock waves, which form local pressure gradients at the wave front. These pressure gradients cause local heating of the grain boundary, accelerating material softening and promoting slip between grains, ultimately resulting in residual stress elimination. This technique was applied to detect the welding residual stress of the upper chord of the main truss of Sanguantang Bridge by using an ultrasonic stress meter. After the measurement, it was found that the welding residual stress in some areas was too large, and the welding residual stress needed to be eliminated. The welding seam was re-inspected after the residual stress relief operation was completed. The test results showed a maximum reduction rate of 63.91% and an average overall reduction rate ranging from 24.52% to 37.23%. The reduction effect is more significant in areas with higher welding residual stress.