Flow injection amperometry provides an opportunity to avoid common drawbacks of classical potentiometry for solid-contact ion-selective electrodes. The current is generated by solid-contact in course of the polymer chain recharging in response to an excess of cations or anions in the polymer film. Cations cause cathodic peaks on the chronoamperogram, while anions result in anodic peaks. For polyaniline with negatively charged substituents, a response to cations is observed, whereas the presence of uncharged ones results in anion detection. Moreover, in the case of the protonated –SO3H group, this compensating current is an order of magnitude lower than that for the deprotonated one. For electroactive self-doped polyanilines, the maximal amperometric signal is achieved at the working potential within the electroactivity range. The proposed constant potential amperometric approach was validated by the successful analysis of human serum with a Na+-selective electrode based on polyaniline.
We report amperometric solid-contact potassium-selective electrodes based on catalytically synthesized Prussian Blue nanoparticles. Both the films and nanoparticles were able to generate an amperometric response in the flow-injection mode under a constant potential. However, the nanoparticles provided a higher sensitivity than the films. Moreover, the intrinsic permeability of Prussian Blue for potassium ions allowed for selective detection of potassium in comparison to sodium even without an ion-selective membrane. The results of electrochemical impedance spectroscopy were used to manage the sensitivity by controlling the charge transfer resistance for ion-selective membranes of different density. By performing measurements in Bis-Tris as a carrier buffer containing no interfering cations, an additional increase in selectivity was enabled. A record selectivity coefficient logK Na+/K+ of −2.7 for the amperometric flow-injection mode was achieved. The obtained results indicate the prospects for analysis of biological fluids as the Na+/K+ ratio is approximately 20–40.