Autonomous vehicles are nowadays one of the most important technologies that will be incorporated to every day life in the next few years. One of the most promising kind of vehicles in terms of efficiency and sustainability are those known as Wing-in-Ground crafts, or WIG crafts, a family of vehicles that seize the proximity of ground to achieve a flight with low drag and high lift. However, this kind of crafts lacks of a sound theory of flight that can lead to robust control solutions that guarantees safe autonomous operation in all the cruising phases.In this paper we address the problem of controlling a WIG craft in different scenarios and using different control strategies in order to compare their performance. The tested scenarios include obstacle avoidance by fly over and recovering from a random disturbance in vehicle attitude. MPC (Model Predictive Control) is tested on the complete nonlinear model, while PID, used as baseline controller, LQR (Linear Quadratic Regulator) and adaptive LQR are tested on top of a partial feedback linearization. Results show that LQR has got the best overall performance, although it is seen that different design specifications could lead to the selection of one controller or another.
In this work, we present the design, implementation, and testing of a guidance system for the UX-1 robot, a novel spherical underwater vehicle designed to explore and map flooded underground mines. For this purpose, it needs to navigate completely autonomously, as no communications are possible, in the 3D networks of tunnels of semistructured but unknown environments and gather various geoscientific data. First, the overall design concepts of the robot are presented. Then, the guidance system and its subsystems are explained. Finally, the system’s validation and integration with the rest of the UX-1 robot systems are presented. A series of experimental tests following the software-in-the-loop and the hardware-in-the-loop paradigms have been carried out, designed to simulate as closely as possible navigation in mine tunnel environments. The results obtained in these tests demonstrate the effectiveness of the guidance system and its proper integration with the rest of the systems of the robot, and validate the abilities of the UX-1 platform to perform complex missions in flooded mine environments.
In this work, we present the design, implementation, and testing of an attitude control system based on State Feedback Linearization (FL) of a prototype spherical underwater vehicle. The vehicle is characterized by a manifold design thruster configuration for both locomotion and maneuvering, as well as on a novel pendulum-based passive pitch control mechanism. First, the mechanical design and onboard electronics set up of the spherically shaped hull are introduced. Afterward, a high-fidelity dynamic model of the system is derived for a 6 degree-of-freedom (DOF) underwater vehicle, followed by several experiments that have been performed in a controlled environment to compare the performance of the proposed control method to that of a baseline Proportional-Integral-Derivative (PID) controller. Experimental results demonstrate that while both controllers were able to perform the specified maneuvers, the FL controller outperforms the PID in terms of precision and time response.
Both three-dimensional (3D) object recognition and pose estimation are open topics in the research community. These tasks are required for a wide range of applications, sometimes separately, sometimes concurrently. Many different algorithms have been presented in the literature to solve these problems separately, and some to solve them jointly. In this paper, an algorithm to solve them simultaneously is introduced. It is based on the definition of a four-dimensional (4D) tensor that gathers and organizes the projections of a 3D object from different points of view. This 4D tensor is then represented by a set of 4D orthonormal moments. Once these moments are arranged in a matrix that can be computed off-line, recognition and pose estimation is reduced to the solution of a linear least squares problem, involving that matrix and the 2D moments of the observed projection of an unknown object. The abilities of this method for 3D object recognition and pose estimation is analytically proved, demonstrating that it does not rely on experimental work to apply a generic technique to these problems. An additional strength of the algorithm is that the required projection is textureless and defined at a very low resolution. This method is computationally simple and shows very good performance in both tasks, allowing its use in applications where real-time constraints have to be fulfilled. Three different kinds of experiments have been conducted in order to perform a thorough validation of the proposed approach: recognition and pose estimation under z axis (yaw) rotations, the same estimation but with the addition of y axis rotations (pitch), and estimation of the pose of objects in real images downloaded from the Internet. In all these cases, results are encouraging, at a similar level to those of state-of-the art algorithms.
In this work, we present the design, implementation, and simulation of a topology-based navigation system for the UX-series robots, a spherical underwater vehicle designed to explore and map flooded underground mines. The objective of the robot is to navigate autonomously in the 3D network of tunnels of a semi-structured but unknown environment in order to gather geoscientific data. We start from the assumption that a topological map has been generated by a low-level perception and SLAM module in the form of a labeled graph. However, the map is subject to uncertainties and reconstruction errors that the navigation system must address. First, a distance metric is defined to compute node-matching operations. This metric is then used to enable the robot to find its position on the map and navigate it. To assess the effectiveness of the proposed approach, extensive simulations have been carried out with different randomly generated topologies and various noise rates.