This study investigates experimentally the shear strengthening and repairing of reinforced concrete (RC) deep beams damaged by heat utilizing near-surface mounted carbon fiber reinforced polymers (NSM-CFRP) ropes. The main parameters adopted in this research are rope orientation (45°, 90°) and rope spacing (150 mm, 200 mm). For this purpose, ten RC deep beams were cast and tested until failure was reached. The test results showed that using NSM-CFRP ropes with various configurations significantly enhanced the shear capacity for repaired and strengthened deep beams. All the tested beams enhanced the ultimate load capacity for the strengthened beams ranging between 19% to 46%, while for the repaired beams, the values ranged between 40.8% to 64.6%. The CFRP ropes oriented at 45° recorded the highest enhancement result in shear capacity. Notably, all tested beams had a satisfactory rise in the enhancement ratio. Consequently, the economic aspect should have priority.

Strengthening of reinforced concrete (RC) structures has become a primary challenge in civil engineering. Different materials and procedures have been used in order to repair or strengthen RC structures. In this research, the NSM-Basalt Bar (NSM-BFRP) technique was used to strengthen high-strength reinforced concrete beams in flexure and shear. Twelve beams were designed, constructed, and tested under four-point loads. Six of them were designed to have insufficient longitudinal steel reinforcement to make sure that the failure would be a flexural failure in the control beam. Whereas, the other six specimens were designed to have insufficient transverse steel reinforcement to make sure that the failure will be a shear failure in the control beam. All RC beams were strengthened using NSM-BFRP with different configurations except control specimens. The load deflection curve, the cracking pattern and the failure mode were evaluated. The experimental results reveal that NSM-BFRP bars significantly enhance the ultimate load capacity of high-strength concrete beams, with flexural capacity improvements of up to 33.33% and shear capacity enhancements of up to 63.5%. However, the use of BFRP bars also led to a shift in failure modes from flexural to shear, particularly in specimens with increased flexural reinforcement. The findings suggest that while NSM-BFRP bars are highly effective in strengthening concrete beams, careful consideration of the reinforcement configuration is necessary to avoid premature shear failure and ensure balanced structural performance.