In this study, we propose a plasma-chemical hybrid NOx removal process using nonthermal plasma for the treatment of flue gases emitted from glass melting furnaces; the process is demonstrated through a laboratory-scale model experiment conducted using a semi-dry desulfurization apparatus. The performance of the system for simultaneous removal of SO2 and NOx is investigated. As a result, NO is effectively oxidized to NO2 by injecting ozone into the spray region and the removal efficiencies of 90% and 50% were obtained for NO and NOx, respectively. In addition, the SO2 removal efficiency of 84% was achieved.
13 September 2019 in IEEE Transactions on Industry Applications
As NO $_x$ and SO $_x$ have significant environmental impacts, advanced treatments are required to remove them from the exhaust gas of a glass melting furnace. Here, we investigate a plasma-chemical hybrid process (PCHP) for this purpose. A pilot-scale experiment of the simultaneous removal of NO $_x$ and SO $_x$ using a PCHP combined with the existing semi-dry type desulfurization reactor is conducted on actual high-temperature exhaust gas from a glass melting furnace. NO in the exhaust gas is oxidized to NO $_2$ using O $_3$ . The exhaust gas must be cooled to less than 150 °C in order to suppress the thermal decomposition of O $_3$ , while the gas temperature at the outlet of the semi-dry reactor must be kept at 200-250 °C to protect the dry-type electrostatic precipitator. Therefore, it is important to form a local cooling area for NO oxidation in the reactor. In this study, we use the three-fluid nozzles of O $_3$ , water, and air to form the local cooling area and effectively oxidize NO to NO $_2$ . In addition, we spray NaOH aqueous solution for SO $_2$ absorption downstream of the NO oxidation area to allow sufficient time for NO oxidation. The SO $_2$ reacts with NaOH to produce Na $_2$ SO $_3$ , a powerful reducing agent. Subsequently, NO $_2$ reacts with Na $_2$ SO $_3$ and is reduced to N $_2$ . As a result, the ratio of the amount of removed NO and NO $_x$ to the amount of injected O $_3$ is 64% and 78%, respectively; therefore, high efficiency is obtained. This study includes actual examples of the treatment of exhaust gas in a glass melting furnace, using PCHP de-SO $_X$ and de-NO $_X$ technologies along with results from pilot-scale experiments.
11 October 2016 in IEEE Transactions on Industry Applications
A pilot-scale simultaneous removal of NOW and SO x , as a nonthermal plasma and chemical hybrid process (PCHP), is carried out on combustion exhaust gas in a glass manufacturing system. The PCHP is implemented in an actual semi-dry-type exhaust gas treatment system. The exhaust gas (12 700 m 3 N/h) is produced by the combustion of fossil fuels and contains both NO x (160 ppm) and SOW (150 ppm). In PCHP, NO is oxidized to water-soluble NO 2 through a plasma process using ozone. Na 2 SO 3 is then produced as a byproduct in a desulfurizing process using a solution of NaOH. The generated NO 2 is then reduced to N 2 and Na 2 SO 4 using an Na 2 SO 3 solution, followed by the dried Na 2 SO 4 particles being removed in a semi-dry reactor by a dry-type electrostatic precipitator. Our findings show the molar ratio of NO to the injected ozone to be more than 0.75. NO and SOW removal efficiencies of 28% and 63% are obtained. Further, the paper discusses de-NO x by the use of a bag filter (BF) for the injection of the NaHCO 3 at the BF inlet. Due to the effect of ozone and NaHCO 3 , NO x removal efficiency is increased by up to 45%. Our results show that higher de-NO x and de-SO x efficiencies are obtained by maintaining a local exhaust gas temperature of less than 150 °C. Through this experiment, it is confirmed that this simultaneous treatment of NO x and SO x using semi-dry-type PCHP is highly effective and promising for exhaust gas treatment in glass manufacturing.
A novel technology for the simultaneous removal of NOx (= NO + NO2) and SOx (= SO2 + SO3) in the flue gas of a glass manufacturing system is described using a plasma-chemical hybrid process (PCHP). The exhaust gas is produced by combustion of liquefied natural gas and contains both NOx (189 - 335 ppm) and SOx (109 - 183 ppm). Lowering the flue gas temperature from more than 200 °C to less than 150 °C is required for effective NO oxidation (80% efficiency) to NO2 by ozone gas injection. Therefore, a mixture of ozone and water are sprayed by compressed air from the three-fluid spray nozzle into the exhaust duct. The ozone gas is prepared using an electrical discharge-induced nonthermal plasma apparatus. In addition, almost all of the SO2 is absorbed by a NaOH absorbent resulting in the generation of Na2SO3. Furthermore, reduction of the water-soluble NO2 by Na2SO3 to N2 affords Na2SO4, which can be reused as glass material. The highest removal efficiency of 39% for NOx is obtained when the NOx concentration is reduced from 315 ppm to 193 ppm (O3/NO = 0.32). This simultaneous de-SOx and de-NOx technology by PCHP is highly effective and promising for exhaust gas treatment for a glass manufacturing system.
To use the continuous combustion of fossil fuels as a sustainable energy source, a low-cost and energy-saving exhaust gas treatment for NO x , SO x , and suspended particulate matter is required. The plasma hybrid exhaust gas treatment technology proposed by the authors is not only a method of plasma treatment, but also a method that combines it with a chemical process, such as chemical solution stabilizer, to clean exhaust gas. This study reports the simulation and application of glass melting furnace exhaust gas treatment as a practical result of the plasma chemical hybrid process (PCHP). In the experiment, higher removal efficiencies of NO, NO x , and SO x (33, 16, and 55%, respectively) were obtained. The energy efficiency of NO x removal by evaluating the electrical power using the cost of NaOH and the power of ozonizers was measured to be 23 g(NO 2 )/kWh. From comparison, the simulated and experimental temperature distributions and NO x concentration were found to be in good agreements. This indicates that numerical design simulation produces a satisfactory result. PCHP can potentially be the most suitable method for exhaust gas treatment in glass melting furnaces.