In this paper, an LC-MS/MS method for the simultaneous identification and quantification of cyanotoxins with hydrophilic and lipophilic properties in edible bivalves is presented. The method includes 17 cyanotoxins comprising 13 microcystins (MCs), nodularin (NOD), anatoxin-a (ATX-a), homoanatoxin (h-ATX) and cylindrospermopsin (CYN). A benefit to the presented method is the possibility for the MS detection of MC-LR-[Dha7] and MC-LR-[Asp3] as separately identified and MS-resolved MRM signals, two congeners which were earlier detected together. The performance of the method was evaluated by in-house validation using spiked mussel samples in the quantification range of 3.12–200 µg/kg. The method was found to be linear over the full calibration range for all included cyanotoxins except CYN for which a quadratic regression was used. The method showed limitations for MC-LF (R² = 0.94), MC-LA (R² ≤ 0.98) and MC-LW (R² ≤ 0.98). The recoveries for ATX-a, h-ATX, CYN, NOD, MC-LF and MC-LW were lower than desired (<70%), but stable. Despite the given limitations, the validation results showed that the method was specific and robust for the investigated parameters. The results demonstrate the suitability of the method to be applied as a reliable monitoring tool for the presented group of cyanotoxins, as well as highlight the compromises that need to be included if multi-toxin methods are to be used for the analysis of cyanotoxins with a broader range of chemical properties. Furthermore, the method was used to analyze 13 samples of mussels (Mytilus edulis) and oysters (Magallana gigas) collected in the 2020–2022 summers along the coast of Bohuslän (Sweden). A complementary qualitative analysis for the presence of cyanotoxins in phytoplankton samples collected from marine waters around southern Sweden was performed with the method. Nodularin was identified in all samples and quantified in bivalve samples in the range of 7–397 µg/kg. Toxins produced by cyanobacteria are not included in the European Union regulatory monitoring of bivalves; thus, the results presented in this study can be useful in providing the basis for future work including cyanotoxins within the frame of regulatory monitoring to increase seafood safety.

Surveys of pesticide residues in fruit are important to demonstrate conformity with strict regulations of newly open markets for export of exotic fruit. Multi-residue methods are tools to ensure compliance with regulations and both the CEN and the AOAC have versions of QuEChERS that are used effectively as mainstream methods. The aim of this study was to assess their performance and pick the optimum one for this particular application using GC-MS. The use of graphitised carbon black (GCB) to improve clean-up was assessed. Optimisation of large volume injection (LVI) and implementation of concurrent back-flushing was needed in order to improve sensitivity at a low concentration levels for 33 pesticides (0.01 mg kg⁻¹). Cleaner total ion current (TIC) profiles were obtained with the CEN method. Recoveries of most of the pesticides showed statistical differences (α = 0.05) when GCB was used in the AOAC method, unlike the CEN method. In general, GCB/no GCB use for CEN clean-up gave good, very similar results for all fruit, though some pesticides showed some adsorption on the GCB surface. The CEN general method was preferred since acceptable recoveries (> 80%) and RSD (< 20%) can be achieved for all analytes.

Phosphorus (P) is one of the primary nutrients limiting crop production. The application of phosphate fertilizers in acidic soils leads to the formation of secondary insoluble compounds that reduces the effectiveness of the fertilizer. The addition of biochar may represent a solution to the problem of nutrients bioavailability, especially P. In this study, tests were performed to determine the effects of amending soil with five different percentages of biochar (0, 5, 10, 20, and 35% w/w) on the phenomena of P sorption and desorption. The effect of soil/ biochar contact treatments on P availability was also examined. Phosphorus sorption was lower in the soils containing biochar compared to normal soil. The accumulated desorption quantity after eight consecutive extractions was 85% higher when 35% biochar was added to the soil than soil alone. Moreover, the application of 35% biochar increased the concentration of soluble P up to 38% after 30 days of incubation. Based on these results, we deduced that biochar induces changes in P retention soil properties that may be beneficial for agricultural soils.

In this work a study of several variables that affect the matrix effects (ME) was performed. The choice was given among four extraction solvents and four different clean-up methods which were compared in order to find the method that produces least ME and gives the highest response for 18 compounds. Variability of ME under identical chromatographic conditions for five fruits was also studied. Finally we evaluated different analyte/matrix ratios to assess the ME. The results showed that the significantly better responses (P < 0.05) were achieved by using the mixture of three absorbents and the use of only Graphitized Carbon Black causes greater suppression of ionization. From the five matrices tested it was found that grapes and tomatoes extract induced a larger ME, meanwhile the use of apple and mango matrices gave responses more like matrix-free standards. Finally, a negative correlation between the suppression of ionization and the compound/matrix ratio was found.