This article documents the muon reconstruction and identification efficiency obtained by the ATLAS experiment for 139 $$\hbox {fb}^{-1}$$ ofppcollision data at $$\sqrt{s}=13$$ TeV collected between 2015 and 2018 during Run 2 of the LHC. The increased instantaneous luminosity delivered by the LHC over this period required a reoptimisation of the criteria for the identification of prompt muons. Improved and newly developed algorithms were deployed to preserve high muon identification efficiency with a low misidentification rate and good momentum resolution. The availability of large samples of $$Z\rightarrow \mu \mu $$ and $$J/\psi \rightarrow \mu \mu $$ decays, and the minimisation of systematic uncertainties, allows the efficiencies of criteria for muon identification, primary vertex association, and isolation to be measured with an accuracy at the per-mille level in the bulk of the phase space, and up to the percent level in complex kinematic configurations. Excellent performance is achieved over a range of transverse momenta from 3 GeV to several hundred GeV, and across the full muon detector acceptance of $$|\eta |<2.7$$ .
Jet energy scale and resolution measurements with their associated uncertainties are reported for jets using 36–81 fb $$^{-1}$$ of proton–proton collision data with a centre-of-mass energy of $$\sqrt{s}=13$$ $${\text {Te}}{\text {V}}$$ collected by the ATLAS detector at the LHC. Jets are reconstructed using two different input types: topo-clusters formed from energy deposits in calorimeter cells, as well as an algorithmic combination of charged-particle tracks with those topo-clusters, referred to as the ATLAS particle-flow reconstruction method. The anti- $$k_t$$ jet algorithm with radius parameter $$R=0.4$$ is the primary jet definition used for both jet types. This result presents new jet energy scale and resolution measurements in the high pile-up conditions of late LHC Run 2 as well as a full calibration of particle-flow jets in ATLAS. Jets are initially calibrated using a sequence of simulation-based corrections. Next, several in situ techniques are employed to correct for differences between data and simulation and to measure the resolution of jets. The systematic uncertainties in the jet energy scale for central jets ( $$|\eta |<1.2$$ ) vary from 1% for a wide range of high- $$p_{{\text {T}}}$$ jets ( $$250<p_{{\text {T}}} <2000~{\text {Ge}}{\text {V}}$$ ), to 5% at very low $$p_{{\text {T}}}$$ ( $$20~{\text {Ge}}{\text {V}}$$ ) and 3.5% at very high $$p_{{\text {T}}}$$ ( $$>2.5~{\text {Te}}{\text {V}}$$ ). The relative jet energy resolution is measured and ranges from ( $$24 \pm 1.5$$ )% at 20 $${\text {Ge}}{\text {V}}$$ to ( $$6 \pm 0.5$$ )% at 300 $${\text {Ge}}{\text {V}}$$ .
Since the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for the third data-taking period of the CERN LHC, Run 3, which started in 2022. The entire silicon pixel tracking detector was replaced. A new powering system for the superconducting solenoid was installed. The electronics of the hadron calorimeter was upgraded. All the muon electronic systems were upgraded, and new muon detector stations were added, including a gas electron multiplier detector. The precision proton spectrometer was upgraded. The dedicated luminosity detectors and the beam loss monitor were refurbished. Substantial improvements to the trigger, data acquisition, software, and computing systems were also implemented, including a new hybrid CPU/GPU farm for the high-level trigger.
31 October 2023 in The European Physical Journal C
The luminosity determination for the ATLAS detector at the LHC during Run 2 is presented, with pp collisions at a centre-of-mass energy $$\sqrt{s}=13$$ TeV. The absolute luminosity scale is determined using van der Meer beam separation scans during dedicated running periods in each year, and extrapolated to the physics data-taking regime using complementary measurements from several luminosity-sensitive detectors. The total uncertainties in the integrated luminosity for each individual year of data-taking range from 0.9% to 1.1%, and are partially correlated between years. After standard data-quality selections, the full Run 2 pp data sample corresponds to an integrated luminosity of $$140.1\pm 1.2$$ $$\hbox {fb}^{-1}$$ , i.e. an uncertainty of 0.83%. A dedicated sample of low-pileup data recorded in 2017–2018 for precision Standard Model physics measurements is analysed separately, and has an integrated luminosity of $$338.1\pm 3.1$$ $$\hbox {pb}^{-1}$$ .
The flavour-tagging algorithms developed by the ATLAS Collaboration and used to analyse its dataset of $$\sqrt{s} = 13$$ TeV pp collisions from Run 2 of the Large Hadron Collider are presented. These new tagging algorithms are based on recurrent and deep neural networks, and their performance is evaluated in simulated collision events. These developments yield considerable improvements over previous jet-flavour identification strategies. At the 77% b-jet identification efficiency operating point, light-jet (charm-jet) rejection factors of 170 (5) are achieved in a sample of simulated Standard Model $$t\bar{t}$$ events; similarly, at a c-jet identification efficiency of 30%, a light-jet (b-jet) rejection factor of 70 (9) is obtained.
8 November 2024 in Computing and Software for Big Science
This paper describes the Combine software package used for statistical analyses by the CMS Collaboration. The package, originally designed to perform searches for a Higgs boson and the combined analysis of those searches, has evolved to become the statistical analysis tool presently used in the majority of measurements and searches performed by the CMS Collaboration. It is not specific to the CMS experiment, and this paper is intended to serve as a reference for users outside of the CMS Collaboration, providing an outline of the most salient features and capabilities. Readers are provided with the possibility to run Combine and reproduce examples provided in this paper using a publicly available container image. Since the package is constantly evolving to meet the demands of ever-increasing data sets and analysis sophistication, this paper cannot cover all details of Combine. However, the online documentation referenced within this paper provides an up-to-date and complete user guide.