We designed and manufactured two single-mode fiber-to-chip three-dimensional (3D) edge couplers with taper and semi-cone structures on a 3.5 µm silicon device layer of a silicon-on-insulator. The 3D finite-difference time-domain is used to simulate and optimize the structure of the edge couplers within the 1550 nm band. The simulation results reveal a maximum coupling efficiency of the 3D edge couplers above 91.42% for the TE mode. The 3 dB coupling tolerances of the TE mode in horizontal and vertical directions are ±4.5 and ±1.5 µm, respectively. Laser-direct-writing grayscale lithography and inductive coupled plasma-reactive ion etching are used in the fabrication of 3D edge couplers. Experimental data show that 3D couplers have a maximum coupling efficiency of about 83.41% in the TE mode.
An optical coupler is a key input/output (I/O) device in a photonic integrated circuit (PIC), which plays the role of light-source import and modulated light output. In this research, a vertical optical coupler consisting of a concave mirror and a half-cone edge taper was designed. We optimized the structure of mirror curvature and taper through finite-difference-time-domain (FDTD) and ZEMAX simulation to achieve mode matching between SMF (single-mode fiber) and the optical coupler. The device was fabricated via laser-direct-writing 3D lithography, dry etching and deposition on a 3.5 µm silicon-on-insulator (SOI) platform. The test results show that the overall loss of the coupler and its connected waveguide at 1550 nm was 1.11 dB in transverse-electric (TE) mode and 2.25 dB in transverse-magnetic (TM) mode.