Yee Yong Tan

Dr. Yee Yong Tan

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 June 2023 in International Journal of Environmental Science and Technology
Verified
Journal Article
Open access
PDF file
YTYee Yong Tan
Yee Yong Tan
YHY. Z. Huong
Y. Z. Huong
FTF. E. Tang
F. E. Tang
ASA. Saptoro
A. Saptoro
The sludge treatment reed bed is a sustainable sewage sludge management technology that offers promising sludge dewatering and stabilisation, due to its low energy and labour requirements, and minimal operating and maintenance costs. Despite numerous existing studies and increasing applications of sludge treatment reed bed in both developed and developing countries, the lack of standard system configurations and operating regimes led to several operational problems, including bed clogging and poor dewatering and mineralisation efficiency. Sludge dewatering and stabilisation in STBRs are complex processes governed by system- and operation-related factors such as the substrate media, macrophytes, loading regime, sludge characteristics, and climate conditions. Rather than the complex experimental study, process-based modelling has become a promising approach to investigating the influence of specific factors on the efficiency of sludge dewatering and stabilisation. This paper presents an overview of the critical system and operating parameters in sludge treatment reed beds and a summary of the interactions between the factors. Then, a framework of process-based modelling is proposed, which provides a useful platform to study the interactions of operating parameters and other factors in the complex processes of sludge dewatering and stabilisation, which supports the system design and optimisation of sludge treatment reed beds.

26 October 2017 in Technologies
Verified
Journal Article
Open access
PDF file
YTYee Yong Tan
Yee Yong Tan
FTFu Ee Tang
Fu Ee Tang
CHCarrie Lee Ing Ho
Carrie Lee Ing Ho
VJValerie Siew Wee Jong
Valerie Siew Wee Jong
The vertical flow constructed wetland (VFCW) has become an attractive decentralised technology for septage treatment. One of the main purposes of the septage treatment is to reduce the volume of raw septage through dewatering, where the solids content is retained in the wetland bed and the water content is released. The retention of solids forms a layer of sludge deposit at the wetland surface, and the drained water, the so-called leachate, typically contains a lower solids content. This article reports the performance of dewatering and filtration of a pilot-scale VFCW designed for septage treatment. A comparison between two feeding strategies, hydraulic loading rate (HLR) and solids loading rate (SLR), is presented. The dewatering efficiency through drainage was found to be dependent on the solids load. The removal of total solids (TS) and chemical oxygen demand (COD) were excellent as the quality of leachate showed that more than 90% of TS and COD were retained in the system. This study reveals that the feeding based on SLR delivered a more sustainable performance for dewatering and solids removal. The build-up of sludge deposit significantly deteriorated the dewatering efficiency through drainage, but it tended to improve the filtration capacity.

1 December 2021 in Environmental Reviews
Verified
Journal Article
Closed access
YTYee Yong Tan
Yee Yong Tan
FTFu Ee Tang
Fu Ee Tang
ASAgus Saptoro
Agus Saptoro
In the last two decades, several process-based models had been developed to describe the transport and fate of contaminants in subsurface flow constructed wetlands (SSF CWs) under a variety of conditions. These models have become valuable tools to better design, control, and optimize the SSF CW system. Moreover, they can aid investigations on the effects of variables of interest on the system. While excellent review papers on these models have been published, the ability of the existing process-based models to simulate the nitrogen transformations in the SSF CWs have not been highlighted. Consequently, a critical review of the simulation of nitrogen transformation processes is desirable. This paper presents an overview of the available models that are capable of modelling the nitrogen dynamics in the SSF CWs. The existing process-based models can be mainly categorized as process-dedicated models and Gujer matrix models. A process-dedicated model is a feasible tool for design purposes. Meanwhile, the Gujer matrix model delivers valuable insights into scientific studies. In this paper, the existing models are summarized and critically discussed with regards to their capability and practicality in simulating the nitrogen dynamics in SSF CWs. Organic nitrogen, ammonium, and nitrate are the common nitrogen compounds considered in the process-based models of SSF CWs. Meanwhile, nitrite was frequently considered together with nitrate, owing to its low concentration in the effluent of SSF CWs. By comparison, ammonification, nitrification, denitrification, plant uptake, and ammonium adsorption are the typical nitrogen transformation and degradation processes found in the existing models, whereas ammonia volatilization processes are rarely found in the literature. Oxygen and organic matter are the major limiting reactants of nitrogen transformation and degradation processes in the modelling, and other factors such as microbial population, temperature, and pH are also considered. The recommendations and future research directions on the influence of microorganism distribution, resting period, oxygen release, ammonium adsorption, and plants are outlined.

2 January 2020 in Journal of Applied Water Engineering and Research
Verified
Journal Article
Closed access
YTYee Yong Tan
Yee Yong Tan
FTFu Ee Tang
Fu Ee Tang
ASAgus Saptoro
Agus Saptoro
EKEe Huey Khor
Ee Huey Khor
A pilot-scale vertical flow constructed wetland (VFCW) was constructed and operated to treat septage based on hydraulic loading rate (HLR). The flow pattern illustrated that the highest hydraulic gradient existed in the deepest ponding leading to peak effluent flow rates. However, the hydraulic performance was found to be highly varying with respect to HLR. It is attributed to the accumulation of sludge deposit that produced preferential flow pathways in the wetland beds. The pilot-scale VFCW was able to retain 95% of TS, COD, and TN with sufficient sludge thickness regardless of the HLR variation. However, NH4+--N and NO3--N in the effluent are strongly correlated to the effluent flow rate, and the associated treatment efficiency is lower. Due to its promising solids removals, HLR is recommended as a practical feeding strategy as it offers a simple application and the ability to control overflow.

11 June 2018 in World Journal of Engineering
Verified
Journal Article
Closed access
JBJason Jie Xiang Bui
Jason Jie Xiang Bui
YTYee Yong Tan
Yee Yong Tan
FTFu Ee Tang
Fu Ee Tang
CHCarrie Ho
Carrie Ho
Purpose: This study aims to investigate the hydraulic behaviour of a pilot-scale, two-staged, vertical flow constructed wetland (VFCW) for septage treatment, in terms of factors such as hydraulic retention time and hydraulic loading rate and its influence on the treatment dynamics. Because of intermittent feeding mode of VFCW systems and variation in its loading, its hydraulic behaviour is highly variable and need to be understood to optimize its treatment performance. Design/methodology/approach: Tracer test were carried out using bromide ion with varying hydraulic loading rates (HLR) of 6.82 cm/d, 9.09 cm/d and 11.40 cm/d (i.e. equivalent to 75 L/d, 100L/d and 125 L/d). Tracer data is then analysed using the Residence Time Distribution (RTD) method. Findings: RTD analysis showed that the increase in HLR increases the average hydraulic retention time (HRT). Subsequently, the increase in HLR results in a lower recovery of effluent, resulting in poor productivity in treatment. The study also showed that the removal of nitrogen and organic matter improved with increasing HRT. However, observations show no correlation between HRT and total solids removal. Originality/value: A performance evaluation method (by tracer) is proposed to understand the hydraulics of flow in constructed wetlands, which has not been widely studied. Additionally, the dynamics of treatment in VFCWs treating septage may also be revealed by the tracer method. The study can be applied to any constructed wetlands designed for treatment of wastewater, septage or sludge.

7 June 2019 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
JBJason Jie Xiang Bui
Jason Jie Xiang Bui
FTFu Ee Tang
Fu Ee Tang
YTYee Yong Tan
Yee Yong Tan
KWKwong Soon Wong
Kwong Soon Wong
ASAgus Saptoro
Agus Saptoro
Sludge treatment in vertical flow constructed wetlands (VFCWs) is a promising alternative to conventional treatment, which provides adequate treatment at low-cost, while being energy efficient. They may dewater and mineralize various kinds of sludge, including surplus sludge from activated sludge systems, agricultural slurries, and septage and faecal sludge effectively. This paper presents a review of the state-of-the-art of VFCWs treating sludge. The effects of varying design and operational parameters, as well as environmental factors on treatment performance are discussed. The paper also summarizes the performance of various pilot- and full-scale systems in terms of final dry matter content and degree of mineralization. In order to understand the governing processes and predict its performance, modelling of VFCWs in sludge treatment is suggested.