A detailed kinetic modeling of the noncatalytic processes of thermal pyrolysis and steam and carbon dioxide reforming of methane revealed almost completely identical kinetics of the methane conversion in these processes. This suggests that, in the temperature range 1400–1800 K, the initial stage of conversion of methane in all these processes is its thermal pyrolysis. The modeling results agree well with the experimental data on methane pyrolysis. For the temperature range examined, the Arrhenius expressions (pre-exponential factors and activation energy) were obtained in the first-order kinetics approximation for the rate of methane conversion in the processes studied. The expressions derived may be useful for making preliminary estimates and carrying out engineering calculations.
The kinetic patterns of the attainment of the equilibrium product composition in non-catalytic processes of partial oxidation and of steam and carbon dioxide reforming of hydrocarbons in the temperature range 1400–1800 K, characteristic of these processes, were analyzed. The need for such analysis is caused by the rapidly increasing consumption of natural gas as a chemical feedstock and by growing attention to environmental problems, in particular, to a decrease in СО 2 emissions or to partial CO 2 utilization. The forward and reverse water gas shift reactions (WGSRs) play an important role in approach to the equilibrium product composition in these processes. Analysis has shown that the elementary reactions characteristic of forward and reverse WGSRs start to play a significant role long before the equilibrium in the system is attained. Already in the intermediate steps of the process, the distribution of the major reaction products, Н 2 , СО, Н 2 О, and СО 2 , almost corresponds to the equilibrium value of Kt = ([H 2 ][CO 2 ])/([CO][H 2 O]), close to the WGSR equilibrium constant Keq , and further conversion of the products occurs at Kt values close to Keq .
Up to 80% of hydrogen production is currently carried out through CO2 emission-intensive natural gas reforming and coal gasification. Water-splitting electrolysis using renewable energy (green H2) is the only process that does not emit greenhouses gases, but it is a quite energy-demanding process. To significantly contribute to the clean energy transition, it is critical that low-carbon hydrogen production routes that can replace current production methods and can expand production capacity to meet new demands are developed. A new path, alternative to steam reforming coupled with CCS (blue H2) that is based on methane cracking, in which H2 production is associated with solid carbon instead of CO2 (turquoise H2), has received increasing attention recent years. The reaction takes place inside the liquid bath, a molten metal reactor. The aim of this article is to model the main kinetic mechanisms involved in the methane cracking reaction with molten metals. The model developed was validated using experimental data produced by the University of La Sapienza. Finally, such a model was used to scale up the reactor architecture.
A detailed kinetic model based on the NUI Galway mechanism for light hydrocarbon oxidation was used to investigate the effects of pressure on the non-catalytic conversion of methane in various gas atmospheres (Ar, H2, CO, CO2, H2O). The study also evaluated the impact of H2O addition on the conversion of CH4 in mixtures with H2 and CO. For CH4 mixed with Ar, CO, or H2, the methane pyrolysis rate exhibits a power-law dependence on pressure (W = APn), with the exponent n ranging from ~0.4 to ~0.65 in the 1400–1800 K temperature range. The achievable CH4 conversion decreases significantly with rising pressure, particularly for CH4–H2 mixtures. For the non-catalytic conversion of CH4 in mixtures with H2O and CO2, the initial pyrolysis rate is similar to that in an argon atmosphere. At high pressures, however, the CH4 concentration profile subsequently passes through a rising region. This is attributed to the interaction of C2H2 and CO products with H2O, which generates additional H2 and consequently shifts the equilibrium of the reaction system (2CH4 ↔ C2H4 + 2H2 ↔ C2H2 + H2) to the left.
This study presents the results of detailed kinetic modeling for the high-pressure, non-catalytic partial oxidation of natural gas. The findings demonstrate the critical importance of reaction kinetics in determining the actual product distribution, particularly given the extended time required for reach equilibrium under these conditions. The influence of kinetics was evaluated across a pressure range of 1 to 100 bar. Although near-complete O2 conversion (>99.99%) is achieved very rapidly at high pressures, a significant amount of unreacted methane remains at this point. Attaining high methane conversion in the post-flame zone requires a time frame that is several orders of magnitude longer. This is attributed to the increasing impact of the partial pressure of H2 produced in this zone, which shifts the equilibrium in the reaction system (2CH4 ↔ C2H4 + 2H2 ↔ C2H2 + 3H2) to the left. This shift, in turn, reduces both the acetylene content in the gas mixture and its consumption via reaction with OH• radicals. Furthermore, an increase in pressure promotes the influence of CO methanation, thereby limiting the maximum achievable CH4 conversion.