The inclusion of online, in situ biosensors in microfluidic cell cultures is important to monitor and characterize a physiologically mimicking environment. This work presents the performance of second-generation electrochemical enzymatic biosensors to detect glucose in cell culture media. Glutaraldehyde and ethylene glycol diglycidyl ether (EGDGE) were tested as cross-linkers to immobilize glucose oxidase and an osmium-modified redox polymer on the surface of carbon electrodes. Tests employing screen printed electrodes showed adequate performance in a Roswell Park Memorial Institute (RPMI-1640) media spiked with fetal bovine serum (FBS). Comparable first-generation sensors were shown to be heavily affected by complex biological media. This difference is explained in terms of the respective charge transfer mechanisms. Under the tested conditions, electron hopping between Os redox centers was less vulnerable than H2O2 diffusion to biofouling by the substances present in the cell culture matrix. By employing pencil leads as electrodes, the incorporation of these electrodes in a polydimethylsiloxane (PDMS) microfluidic channel was achieved simply and at a low cost. Under flow conditions, electrodes fabricated using EGDGE presented the best performance with a limit of detection of 0.5 mM, a linear range up to 10 mM, and a sensitivity of 4.69 μA mM−1 cm−2.
The type and concentration of ions present in a solution containing an electroactive polyelectrolyte shape its configuration, adsorption, and electrochemical response.
Redox mediators are pivotal players in the electron transfer process between enzymes and electrodes. We present an alternative approach for redox mediation based on branched polyethyleneimine (BPEI) modified with an osmium complex. This redox polyelectrolyte is crosslinked with phosphate to produce colloidal particles with a diameter of ca. 1 μm, which, combined with glucose oxidase (GOx), can form electroactive assemblies through either layer by layer assembly (LbL) or one-pot drop-casting (OPDC). The addition of NaCl to these colloidal systems induces the formation of films that otherwise poorly grow, presenting an outstanding catalytic current. The system was tested as a bioanode delivering a power output of 148 μW per nmol of mediator. These results are explained in terms of the interactions of the ions with the polyelectrolyte and represent a new route for the development of bioelectrochemical devices involving redox mediators and enzymes.