Chieu Quang Bui

Dr. Chieu Quang Bui

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 August 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
CBChieu Quang Bui
Chieu Quang Bui
LLLudovic Largeau
Ludovic Largeau
MMMartina Morassi
Martina Morassi
NJNikoletta Jegenyes
Nikoletta Jegenyes
OMOlivia Mauguin
Olivia Mauguin
Noelle GogneauNoelle Gogneau
Noelle Gogneau
The development of sensors working in a large range of temperature is of crucial importance in areas such as monitoring of industrial processes or personal tracking using smart objects. Devices integrating GaN/Ga2O3 core/shell nanowires (NWs) are a promising solution for monitoring carbon monoxide (CO). Because the performances of sensors primarily depend on the material properties composing the active layer of the device, it is essential to control them and achieve material synthesis in the first time. In this work, we investigate the synthesis of GaN/Ga2O3 core-shell NWs with a special focus on the formation of the shell. The GaN NWs grown by plasma-assisted molecular beam epitaxy, are post-treated following thermal oxidation to form a Ga2O3-shell surrounding the GaN-core. We establish that the shell thickness can be modulated from 1 to 14 nm by changing the oxidation conditions and follows classical oxidation process: A first rapid oxide-shell growth, followed by a reduced but continuous oxide growth. We also discuss the impact of the atmosphere on the oxidation growth rate. By combining XRD-STEM and EDX analyses, we demonstrate that the oxide-shell is crystalline, presents the β-Ga2O3 phase, and is synthesized in an epitaxial relationship with the GaN-core.

28 July 2023 in Materialia
Verified
Journal Article
Closed access
CBChieu Quang Bui
Chieu Quang Bui
Vincent ConsonniVincent Consonni
Vincent Consonni
SBSarah Boubenia
Sarah Boubenia
GGGuillaume Gay
Guillaume Gay
CPCorinne Perret
Corinne Perret
Bassem SALEMBassem SALEM
Bassem SALEM

12 November 2021 in Materials Advances
Verified
Journal Article
Open access
PDF file
CBChieu Quang Bui
Chieu Quang Bui
Gustavo ArdilaGustavo Ardila
Gustavo Ardila
HRHervé Roussel
Hervé Roussel
Carmen JiménezCarmen Jiménez
Carmen Jiménez
IGIsabelle Gélard
Isabelle Gélard
Vincent ConsonniVincent Consonni
Vincent Consonni
The formation process of ZnO thin films grown by pulsed-liquid injection metal–organic chemical vapour deposition (PLI-MOCVD) has a major impact on its morphological, structural, electrical and piezoelectric properties, but their correlation has not been elucidated yet nor decoupled from the thickness effects. In this work, we investigate the influence of the O2 gas and diethylzinc (DEZn) solution flow rates on the properties of ZnO thin films with a given thickness and grown on silicon. We show that the O2/DEZn flow rate ratio through the oxygen chemical potential significantly affects the O- and Zn-polarity domain distribution, their related size and shape, the chemical composition, and the incorporation of microstructural defects and residual impurities, resulting in a direct effect on the piezoelectric amplitude of ZnO thin films. In particular, the Zn-polarity domains are found to systematically exhibit a larger piezoelectric amplitude than the O-polarity domains, regardless of the O2/DEZn flow rate ratio. A comprehensive description recapitulating the formation process of ZnO thin films through three different regimes depending on the O2/DEZn flow rate ratio is further gained. These results demonstrate the crucial ability of the PLI-MOCVD system to tune the polarity of ZnO thin films along with other suitable properties for piezoelectric applications by carefully adjusting the O2 gas and DEZn solution flow rates.

2 August 2023 in Nanoenergy Advances
Verified
Journal Article
Open access
PDF file
CBChieu Quang Bui
Chieu Quang Bui
Vincent ConsonniVincent Consonni
Vincent Consonni
Carmen JiménezCarmen Jiménez
Carmen Jiménez
HRHervé Roussel
Hervé Roussel
XMXavier Mescot
Xavier Mescot
GAGustavo Ardila
Gustavo Ardila
Zinc oxide nanowires (ZnO NWs) have gained considerable attention in the field of piezoelectricity in the past two decades. However, the impact of growth-process conditions on their dimensions and polarity, as well as the piezoelectric properties, has not been fully explored, specifically when using pulsed-liquid injection metal–organic chemical vapor deposition (PLI-MOCVD). In this study, we investigate the influence of the O2 gas and DEZn solution flow rates on the formation process of ZnO NWs and their related piezoelectric properties. While the length and diameter of ZnO NWs were varied by adjusting the flow-rate conditions through different growth regimes limited either by the O2 gas or DEZn reactants, their polarity was consistently Zn-polar, as revealed by piezoresponse force microscopy. Moreover, the piezoelectric coefficient of ZnO NWs exhibits a strong correlation with their length and diameter. The highest mean piezoelectric coefficient of 3.7 pm/V was measured on the ZnO NW array with the length above 800 nm and the diameter below 65 nm. These results demonstrate the ability of the PLI-MOCVD system to modify the dimensions of ZnO NWs, as well as their piezoelectric properties.

24 April 2023 in ACS Applied Nano Materials
Verified
Journal Article
Closed access
CBChieu Quang Bui
Chieu Quang Bui
Vincent ConsonniVincent Consonni
Vincent Consonni
SBSarah Boubenia
Sarah Boubenia
GGGuillaume Gay
Guillaume Gay
CPCorinne Perret
Corinne Perret
Bassem SALEMBassem SALEM
Bassem SALEM

7 April 2026
Verified
Thesis
Closed access
CBChieu Quang Bui
Chieu Quang Bui
Développement de couches minces et de nanofils de ZnO par Dépôt Chimique en Phase Vapeur aux Organométalliques et à Injection Liquide Pulsée pour des applications piézoélectriques: L'oxyde de zinc (ZnO) est un matériau durable très intéressant pour les applications piézoélectriques en tant que semiconducteur biocompatible et composé d’éléments abondants. Cependant, l'efficacité piézoélectrique du ZnO dépend fortement de ses propriétés morphologiques, structurales et électriques. De manière intéressante, les conditions de croissance employées durant le processus de dépôt chimique en phase vapeur aux organométalliques et à injection liquide pulsée (PLI-MOCVD) peuvent influencer largement les propriétés morphologiques, structurales, électriques et piézoélectriques du dépôt de ZnO, mais leurs corrélations n'ont pas encore été explorées. L’objectif de cette thèse est de comprendre et de contrôler les facteurs clés gouvernant la formation du ZnO par PLI-MOCVD et améliorant ses performances piézoélectriques. La température de croissance, les débits des réactifs et la nature du substrat durant le processus de PLI-MOCVD sont optimisés afin d'étudier leurs effets sur la croissance de couches minces et de nanofils de ZnO ainsi que sur leurs propriétés.En augmentant la température de la croissance de 400 à 750°C tout en fixant tous les autres paramètres de croissance, la morphologie du ZnO déposé sur des substrats de Si passe de couches minces à nanofils. Cette transition de morphologie s'accompagne d'une amélioration de l'orientation suivant l'axe c, du coefficient piézoélectrique et de l'uniformité de la polarité du Zn. Le post-recuit à haute température sous atmosphère d'O2 effectué sur les couches minces de ZnO conduit également à une augmentation de l'orientation suivant l'axe c, du coefficient piézoélectrique et de l'uniformité de la polarité Zn. La variation du débit à 500 °C permet d'obtenir des couches minces avec des morphologies et des distributions de polarité différentes. Sur ces couches minces, la différence de propriétés et d'efficacité piézoélectrique entre les domaines de polarités Zn et O est montrée. Au contraire, la variation du débit à 700 °C mène à la formation de nanofils de longueur et de diamètre différents. Tous les nanofils présentent la polarité Zn. La corrélation entre l'efficacité piézoélectrique et la géométrie des nanofils est également présentée. En outre, l'intégration de la couche d'AZO en tant qu'électrode transparente inférieure conduit à une augmentation supplémentaire de l'efficacité piézoélectrique des nanofils de ZnO tout en ouvrant certaines perspectives orientées vers la fabrication de dispositifs piézoélectriques insensibles à l’éclairement visible et contenant seulement des matériaux durables. Ces résultats démontrent la flexibilité du système de PLI-MOCVD pour la croissance de ZnO avec différentes morphologies et différentes propriétés pour les dispositifs piézoélectriques.