The low permeability of silty hydrate reservoirs in the South China Sea is a critical issue that threatens safe, efficient, and long‐term gas production from these reservoirs. Hydraulic fracturing is a potentially promising stimulation technology for such low‐permeability reservoirs. Here, we assess the gas production potential of a depressurization horizontal well that is assisted by the hydraulic fracturing using numerical simulation according to field data at site SH2 in this area. In addition, the number of horizontal wells drilled is discussed if commercial production is to be performed at this site. The results show that the production potential can be significantly stimulated at the early production stage by adopting hydraulic fracturing in this reservoir due to a better depressurization effect. However, the increase in gas recovery gradually decreases with the continuous dissociation of gas hydrates, and the evolution trend is similar to that in a reservoir without stimulation during later periods of gas production because the dissociation front gradually moves away from the fractures. From the perspective of production potential, using a horizontal well scheme assisted by the hydraulic fracturing technology for gas recovery from a hydrate deposit can sharply reduce the number of operation wells, shorten the drilling operation time, and boost the economic efficiency. The horizontal well scheme may be an effective way to increase the gas yield if the application of quickly deployed horizontal wells and hydraulic fracturing techniques in such hydrate reservoirs greatly increases in the near future.

Schematic of anti-agglomeration effect of surfactants promoting gas hydrate particle dispersion.

The process of extracting natural gas from gas hydrate‐bearing sediments (GHBS) may yield significant sand influx due to the metastable nature of GHBS. Selecting appropriate sand control media is vital to addressing the challenges caused by excessive sand production. This study proposes a protocol called holding coarse expelling fine particles (HCEFP) for sand control design. The protocol aims to provide a new optimization method for screen mesh size selection for clayey silt hydrate reservoirs. Detailed optimizing procedures of proper candidate screen mesh sizes in hydrate exploitation well in clayey silt hydrate reservoirs are depicted based on the HCEFP. Then, the site W18, which is located in the Shenhu area of the northern South China Sea, is taken as an example to illustrate the optimization procedure for screen mesh size selection. The results reveal that complete solid retention via a standalone screen is rarely beneficial as high clay contents can adversely affect wellbore productivity due to excessive plugging. Screen aperture size selection for clayey silt hydrate wells should strike a balance between retaining coarser particles and avoiding screen blockage by the relatively fine particles. Furthermore, longitudinal heterogeneity of the PSDs also increases the difficulties associated with sand control design. Multistage sand control optimization is necessary in hydrate production wells. For Site W18, we recommend that the entire production interval can be divided into two subintervals for multistage sand control operations.