Metamaterials with local resonance show promising application prospects in low-frequency vibration attenuation. However, with the drawback of narrow band gap, such potential is greatly limited. In order to broaden the local resonant band gap, a semi-active graded magnetorheological elastomer (MRE) metamaterial sandwich beam (GMREMSB) with real-time tunable graded stiffness was proposed and investigated in this study. For theoretical calculation, a mass-spring model was established for the GMREMSB. Then the calculated band gap and transmissibility using Timoshenko beam theory and spectral element method were compared. An experimental test was also conducted for verification. The results show that the bandwidth of the proposed GMREMSB can be widened by the graded stiffness arranged in ascending order. The experimental band gap of the GMREMSB under the graded current of 0.0–0.5–1.0 A is 6.4 Hz wider than the band gap of the periodic structure with the single current of 0.0 A and is 5.0 Hz wider than that of 1.0 A. The growth rate reaches 15.06% and 11.39%, respectively.
10 December 2023 in Journal of Sound and Vibration
Magnetorheological (MR) technology has provided effective solutions to many engineering bottleneck problems due to its controllable nature. However, designing a rotary MR damper with a high torque–volume ratio is always challenging, especially for some specific application scenarios with constrained space, such as robot joints. To solve this problem, a rotary damper based on MR bearings was designed and evaluated in this study. In this rotary damper, two MR bearings are utilized to provide controllable damping torques and serve as rotors, which greatly saves space while providing high torque. This feature grants the characteristics of compact design and high torque–volume ratio. Quasistatic testing shows that the damping torque of this rotary damper can reach 2.92 Nm when the applied current is 1.2 A. It achieves a high torque–volume ratio of 190 kN/m2, which is nearly four times higher than that of existing rotary MR dampers. The experimental results show that the proposed MR damper is effective in satisfying the high torque requirement in a limited space.