Yaqiu Tao

Yaqiu Tao


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2019 in Results in Physics
Verified
Journal Article
Open access
ZXZhonghuai Xia
Zhonghuai Xia
YTYaqiu Tao
Yaqiu Tao
ZPZhigang Pan
Zhigang Pan
XSXiaodong Shen
Xiaodong Shen

16 June 2023 in Materials
Verified
Journal Article
Open access
PDF file
GMGuansheng Ma
Guansheng Ma
ZPzhigang Pan
zhigang Pan
YLYunfei Liu
Yunfei Liu
YLYinong Lyu
Yinong Lyu
YTYaqiu Tao
Yaqiu Tao
The use of solar photocatalysts to degrade organic pollutants is not only the most promising and efficient strategy to solve pollution problems today but also helps to alleviate the energy crisis. In this work, MoS2/SnS2 heterogeneous structure catalysts were prepared by a facile hydrothermal method, and the microstructures and morphologies of these catalysts were investigated using XRD, SEM, TEM, BET, XPS and EIS. Eventually, the optimal synthesis conditions of the catalysts were obtained as 180 °C for 14 h, with the molar ratio of molybdenum to tin atoms being 2:1 and the acidity and alkalinity of the solution adjusted by hydrochloric acid. TEM images of the composite catalysts synthesized under these conditions clearly show that the lamellar SnS2 grows on the surface of MoS2 at a smaller size; high-resolution TEM images show lattice stripe distances of 0.68 nm and 0.30 nm for the (002) plane of MoS2 and the (100) plane of SnS2, respectively. Thus, in terms of microstructure, it is confirmed that the MoS2 and SnS2 in the composite catalyst form a tight heterogeneous structure. The degradation efficiency of the best composite catalyst for methylene blue (MB) was 83.0%, which was 8.3 times higher than that of pure MoS2 and 16.6 times higher than that of pure SnS2. After four cycles, the degradation efficiency of the catalyst was 74.7%, indicating a relatively stable catalytic performance. The increase in activity could be attributed to the improved visible light absorption, the increase in active sites introduced at the exposed edges of MoS2 nanoparticles and the construction of heterojunctions opening up photogenerated carrier transfer pathways and effective charge separation and transfer. This unique heterostructure photocatalyst not only has excellent photocatalytic performance but also has good cycling stability, which provides a simple, convenient and low-cost method for the photocatalytic degradation of organic pollutants.

1 May 2019 in Catalysis Communications
Verified
Journal Article
Closed access
ZPZhigang Pan
Zhigang Pan
ZXZhonghuai Xia
Zhonghuai Xia
YTYaqiu Tao
Yaqiu Tao
XSXiaodong Shen
Xiaodong Shen

15 May 2024 in Materials
Verified
Journal Article
Open access
PDF file
CZCongyi Zhang
Congyi Zhang
ZPzhigang Pan
zhigang Pan
YTYaqiu Tao
Yaqiu Tao
Hydrogen, as a clean, safe, and efficient energy carrier, is one of the hot energy sources that have attracted much attention. Mo2C, due to the introduction of C atoms, makes the atomic spacing of the Mo lattice decrease and changes the width of the d-band, which makes the electronic properties of Mo2C similar to that of Pt noble metals, exhibiting excellent electrochemical hydrogen precipitation performance. MoS2, due to its special crystal structure and tunable electronic structure, has been widely studied. In this paper, Mo2C nanoparticles were prepared by high-temperature carbonization, and then two-dimensional layered MoS2 were be loaded on Mo2C nanoparticles by the hydrothermal method to synthesize Mo2C/MoS2 composite catalysts. Their electrochemical hydrogen precipitation (HER) performance under acidic conditions was tested. The above catalysts were also characterized by modern material testing methods such as XRD, SEM, TEM, and XPS. The results showed that the composite catalysts exhibited the most excellent electrochemical hydrogen precipitation performance at Mo2C/MoS2-3, with the lowest overpotential at a current density of 10 mA cm−2, Tafel slope, and electrochemical impedance. At the same time, the electrochemically active area was dramatically enhanced, with good stability under prolonged testing. The catalytic activity was significantly improved compared with that of Mo2C and MoS2. The characterization and experimental results indicate that the heterogeneous structure of Mo2C and MoS2 formed a built-in electric field between the two, which accelerated the electron transfer efficiency and provided more active sites. The Mo2C/MoS2 composite catalyst is a low-cost, easy-to-prepare, and high-efficiency electrochemical hydrogen precipitation catalyst, providing a new idea for developing green and clean energy.

28 May 2023 in Materials
Verified
Journal Article
Open access
PDF file
DDDaoyu Dong
Daoyu Dong
WYWeitao Yan
Weitao Yan
YTYaqiu Tao
Yaqiu Tao
YLYunfei Liu
Yunfei Liu
YLYinong Lyu
Yinong Lyu
ZPzhigang Pan
zhigang Pan
Solar energy is an inexhaustible clean energy providing a key solution to the dual challenges of energy and environmental crises. Graphite-like layered molybdenum disulfide (MoS2) is a promising photocatalytic material with three different crystal structures, 1T, 2H and 3R, each with distinct photoelectric properties. In this paper, 1T-MoS2 and 2H-MoS2, which are widely used in photocatalytic hydrogen evolution, were combined with MoO2 to form composite catalysts using a bottom-up one-step hydrothermal method. The microstructure and morphology of the composite catalysts were studied by XRD, SEM, BET, XPS and EIS. The prepared catalysts were used in the photocatalytic hydrogen evolution of formic acid. The results show that MoS2/MoO2 composite catalysts have an excellent catalytic effect on hydrogen evolution from formic acid. By analyzing the photocatalytic hydrogen production performance of composite catalysts, it suggests that the properties of MoS2 composite catalysts with different polymorphs are distinct, and different content of MoO2 also bring differences. Among the composite catalysts, 2H-MoS2/MoO2 composite catalysts with 48% MoO2 content show the best performance. The hydrogen yield is 960 µmol/h, which is 1.2 times pure 2H-MoS2 and two times pure MoO2. The hydrogen selectivity reaches 75%, which is 22% times higher than that of pure 2H-MoS2 and 30% higher than that of MoO2. The excellent performance of the 2H-MoS2/MoO2 composite catalyst is mainly due to the formation of the heterogeneous structure between MoS2 and MoO2, which improves the migration of photogenerated carriers and reduces the possibilities of recombination through the internal electric field. MoS2/MoO2 composite catalyst provides a cheap and efficient solution for photocatalytic hydrogen production from formic acid.

1 January 2020 in Journal of Renewable Materials
Verified
Journal Article
Open access
SZShuaishuai Zhu
Shuaishuai Zhu
ZPZhigang Pan
Zhigang Pan
YTYaqiu Tao
Yaqiu Tao
YCYue Chen
Yue Chen
Hydrogen is recognized as a promising energy scours in the close future. Online hydrogen preparation from formic acid under mild reaction conditions causes extensive interests. Mo2C and metal (Fe, Ni, Co, K) doped Mo2C on granular activated carbon (GAC) were prepared and used as heterogeneous catalysts for H2 generation from formic acid on a fixed bed reactor at 100–250°C. The formic acid conversions on doped Mo2C-Me/GAC are clearly improved, especially at lower reaction temperatures. Co doping presents outstanding effect on H2 selectivity and conversion rate compared to Ni and Fe. A 56.3% formic acid conversion was reached on Mo2C-Co/GAC at 100°C, which triples that on Mo2C/ GAC at the same temperature. At 150°C, a high formic acid conversion over 90% was reached on Mo2C-Co/GAC. These long lifetime catalysts with no precious metal provide a low cost route to hydrogen production from formic acid.