Recently, by taking advantage of the synergistic effects of both graphene and ZnO, various photoelectric devices that combine graphene and ZnO have exhibited excellent device performances and attracted increasing research interest. However, although significant achievements have been made, many challenges still exist. In this review paper, we comprehensively summarize the recent advances in the fabrication of various graphene (also including reduced graphene oxide)–ZnO (e.g. ZnO films, nanowires, nanotubes, nanorods etc.) hybrid heterostructures, and their application in a number of optoelectronic devices, including photodiodes, phototransistors, solar cells, light emitting diodes (LEDs), lasers and so on. We start by briefly surveying the recent progress in the fabrication methodologies such as low-temperature and high-temperature methods. And then, we will elaborate on the optoelectronic device application in terms of device physics, performance analysis, and device optimization approaches. Finally, we close with some unresolved issues and challenges in this field.
In this work, we presented a surface mechanical attrition treatment (SMAT)-assisted approach to the synthesis of one-dimensional copper oxide nanowires (CuO NWs) for nanodevices applications. The as-prepared CuO NWs have diameter and the length of 50 ~ 200 nm and 5 ~ 20 μm, respectively, with a preferential growth orientation along [1 1 ¯ 0] direction. Interestingly, nanofield-effect transistor (nanoFET) based on individual CuO NW exhibited typical p-type electrical conduction, with a hole mobility of 0.129 cm2V-1 s-1 and hole concentration of 1.34 × 1018 cm-3, respectively. According to first-principle calculations, such a p-type electrical conduction behavior was related to the oxygen vacancies in CuO NWs. What is more, the CuO NW device was sensitive to visible light illumination with peak sensitivity at 600 nm. The responsitivity, conductive gain, and detectivity are estimated to be 2.0 × 102 A W-1, 3.95 × 102 and 6.38 × 1011 cm Hz1/2 W-1, respectively, which are better than the devices composed of other materials. Further study showed that nanophotodetectors assembled on flexible polyethylene terephthalate (PET) substrate can work under different bending conditions with good reproducibility. The totality of the above results suggests that the present CuO NWs are potential building blocks for assembling high-performance optoelectronic devices.
24 August 2019 in Journal of Materials Chemistry C
Two-dimensional (2D) materials have been a research hot topic in the passed decades due to their unique and fascinating properties. Among them, mechanical properties play an important role in their application. However, there lacks an effective tool for high-throughput calculating, analyzing and visualizing the mechanical properties of 2D materials. In this work, we present the mech2d package, a highly automated toolkit for calculating and analyzing the second-order elastic constants (SOECs) tensor and relevant properties of 2D materials by considering their symmetry. In the mech2d, the SOECs can be fitted by both the strain–energy and stress–strain approaches, where the energy or strain can be calculated by a first-principles engine, such as VASP. As a key feature, the mech2d package can automatically submit and collect the tasks from a local or remote machine with robust fault-tolerant ability, making it suitable for high-throughput calculation. The present code has been validated by several common 2D materials, including graphene, black phosphorene, and so on.