In the existing rolling bearing performance degradation assessment methods, the input signal is usually mixed with a large amount of noise and is easily disturbed by the transfer path. The time information is usually ignored when the model processes the input signal, which affects the effect of bearing performance degradation assessment. To solve the above problems, an end-to-end performance degradation assessment model of railway axle box bearing based on a deep residual shrinkage network and a deep long short-term memory network (DRSN-LSTM) is proposed. The proposed model uses DRSN to extract local abstract features from the signal and denoises the signal to obtain the denoised feature vector, then uses deep LSTM to extract the time-series information of the signal. The healthy time-series signal of the rolling bearing is input into the DRSN-LSTM reconstruction model for training. Time-domain, frequency-domain, and time–frequency-domain features are extracted from the signal both before and after reconstruction to form a multi-domain features vector. The mean square error of the two feature vectors is used as the degradation indicator to implement the performance degradation assessment. Artificially induced defects and rolling bearings life accelerated fatigue test data verify that the proposed model is more sensitive to early failures than mathematical models, shallow networks or other deep learning models. The result is similar to the development trend of bearing failures.
Railway axle box bearing fault signal contains high Q-factor resonance and low Q-factor transient shock components with periodic transient shock features that can characterize bearing faults. However, extracting fault features is usually difficult due to noise, transmission paths, and high-amplitude accidental shocks. Therefore, to address the abovementioned problems, the multilevel feature extraction method for adaptive fault diagnosis of railway axle box bearing was proposed. This paper used the maximum second-order cyclostationary blind convolution (CYCBD) to weaken the influence of disturbances, enhancing weak transient shock components. Resonant sparse decomposition(RSSD) is used for the selection of quality factor Q due to its excellent fault feature separation property. Considering the strict fault frequency component periodicity in the envelope spectrum, the envelope spectrum multipoint kurtosis (ESMK) is proposed as a metric. The Q factor is optimized using the gray wolf optimization algorithm (GWO) to obtain an adaptive sparse decomposition method (GWO-RSSD) for extracting bearing transient fault shocks to eliminate the signal effects of high-amplitude disturbance shocks and background noise. The simulation results and measured signal analysis of railway axle box bearing show that ESMK can effectively measure periodic transient shocks under strong shock interference compared with the MED-RSSD method. Thus, GWO-RSSD can adaptively separate the optimal low-Q resonance components, verifying the methods effectiveness and superiority.