In the Ordos Basin, Chang 81, a Member of the Yanchang Formation, features the development of braided river thin-bedded tight sandstones. These sandstones constitute one of the main production layers of tight oil and gas in the Yanchang Formation within the basin. This study integrates data from core samples, drilling, and seismic information to identify braided river thin-bedded sandstones in the Chang 81 Member at Daijiaping, Ordos Basin, using a method of constrained correlation between seismic waveform and seismic facies. This approach aids in determining the sedimentary microfacies types and reservoir characteristics of thin-bedded tight sandstones. We establish a quantitative fitting formula for the width-to-thickness ratio of braided channel sand bodies to finely characterize sand body stacking patterns and spatial distribution of thin-bedded tight sandstones in braided channels. Braided delta plain deposits in the Chang 81 Member at Daijiaping mainly comprise four types of sedimentary microfacies: braided channels, crevasse channels, floodplains, and swamps. The thickness of the reservoir sand body of Chang 81 member is mainly concentrated between 5–25 m, with low porosity and permeability, making it a typical thin-bedded tight sandstone reservoir. A method of constrained correlation between seismic waveforms and seismic facies was employed to identify sand bodies of braided river thin-bedded sandstones in the Chang 81 Member, summarizing four sand body stacking patterns: longitudinal incision type, longitudinal separation type, lateral shifting type, and single channel type. Furthermore, a quantitative forecasting formula of width-to-thickness ratio was established for the river channel scale, providing accurate guidance for well deployment. Horizontal wells deployed from the sand body’s side towards its center in a river channel yield a production 1.8 times higher than that of horizontal wells deployed in the opposite direction. Thin-bedded tight sandstones in braided channels, characterized by flat-top and convex-bottom lenticular seismic facies, hold practical significance in guiding the deployment of horizontal well patterns for tight oil and enhancing oil and gas recovery.
The identification of lithology and fluids in reservoirs is the key to the quantitative characterization of gas reservoirs. However, the Ma541 Member of the Majiagou Formation in the Ordos Basin is characterized by strong reservoir heterogeneity, variable lithologic components and complex gas–water relationships. This leads to severe overlapping of conventional logging responses, posing significant challenges to detailed reservoir evaluation. Taking the Ma541 Member in the central Shaanbei Slope of the Ordos Basin as the research object, this study adopts the logging curve superposition and reconstruction method to quantitatively identify reservoir lithology and fluid properties, and establishes a set of identification standards for lithology-fluid logging curve superposition and reconstruction. The results show that the lithology identification plate constructed by introducing new parameters eliminates dimensional differences and effectively highlights the response characteristics of different lithologies. It can rapidly and effectively identify limestone, limy dolomite, dolomite, argillaceous dolomite, and mudstone with an identification accuracy exceeding 90% and an average accuracy of over 92%. In terms of fluid identification, the constructed ΔΦ3–ΔΦ4–ΔΦ5 3D plate successfully achieved the stereoscopic differentiation of gas layers, gas-bearing water layers, water layers, and dry layers. The gas layer identification accuracy reached 93.9%, which is significantly superior to the traditional 2D crossplot method. Applying this model to the plane prediction of lithology in the Ma541 Member of the study area, it was found that the lithology distribution features “pure in the east and mixed in the west.” The central-eastern and southeastern parts of the study area mainly develop high-quality dolomite and limy dolomite reservoirs, making them favorable areas for natural gas exploration. This study provides effective technical support for the quantitative identification of lithology and fluids in non-cored well sections and improves regional exploration and development efficiency.