Core Ideas: Unsaturated hydraulic conductivity of stony soils was determined in medium moisture range. Evaporation method works for stony soils, even if stone contents are high. Theoretical scaling models showed a good agreement with measurements for moderate stone contents. Model results and measurements differ markedly for soils with high stone contents. Studying the role of gravel, stones, or rock fragments on effective soil hydraulic properties (SHPs) is crucial for understanding and predicting soil water processes such as evaporation, redistribution, and water and solute transport through soils containing significant amounts of coarse inclusions. We conducted a laboratory study in which we investigated the effect of stones on the water retention and unsaturated hydraulic conductivity curves of soil–stone mixtures. Stony soils were created by packing predefined masses of soil particles (sand and sandy loam) with diameters <2 mm and crushed basalt (2–5 and 7–15 mm). The resulting mixtures ranged from 0 to 40% (v/v) stone content. The SHPs were determined with the simplified evaporation method. The measurements yielded plausible water retention and hydraulic conductivity curves across a wide moisture range. Results qualitatively showed the expected dependencies of SHPs on volumetric stone content, characterized by a reduction of soil water content and hydraulic conductivity across the whole pressure head range. Measured data suggested that coarse inclusions in soil tend to widen the effective pore‐size distribution. Prediction of SHPs of the stony soils, performed by fitting a flexible SHP model to the data of the background soil and scaling it with approaches from the literature, worked well for low stone contents. However, for volumetric stone contents of 25 and 40%, measured SHPs differed substantially from the properties predicted by simple scaling models.
Soil hydraulic properties (SHPs), particularly soil water retention capacity and hydraulic conductivity of unsaturated soils, are among the key properties that determine the hydrological functioning of terrestrial systems. Some large collections of SHPs, such as the UNSODA and HYPRES databases, have already existed for more than 2 decades. They have provided an essential basis for many studies related to the critical zone. Today, sample-based SHPs can be determined in a wider saturation range and with higher resolution by combining some recently developed laboratory methods. We provide 572 high-quality SHP data sets from undisturbed, mostly central European samples covering a wide range of soil texture, bulk density and organic carbon content. A consistent and rigorous quality filtering ensures that only trustworthy data sets are included. The data collection contains (i) SHP data, which consist of soil water retention and hydraulic conductivity data, determined by the evaporation method and supplemented by retention data obtained by the dewpoint method and saturated conductivity measurements; (ii) basic soil data, which consist of particle size distribution determined by sedimentation analysis and wet sieving, bulk density and organic carbon content; and (iii) metadata, which include the coordinates of the sampling locations. In addition, for each data set, we provide soil hydraulic parameters for the widely used van Genuchten–Mualem model and for the more advanced Peters–Durner–Iden model. The data were originally collected to develop and test SHP models and associated pedotransfer functions. However, we expect that they will be very valuable for various other purposes such as simulation studies or correlation analyses of different soil properties to study their causal relationships. The data are available at https://doi.org/10.5880/fidgeo.2023.012 (Hohenbrink et al., 2023).
Rock fragments (RFs) influence soil hydraulic properties (SHPs), and knowledge about the SHPs of stony soils is important in vadose zone hydrology. However, experimental evidence on effective SHPs of stony soils is still scarce and mostly restricted to water‐saturated conditions and low volumetric contents of RFs. We examined the influence of RFs on SHPs through a series of measurements. Stony soils were prepared by packing 250‐cm 3 cylinders with soils of two textures (sandy loam and silt loam) and with different volumes of RFs (up to 50% v/v) with a diameter of 8–16 mm. Samples were prepared in a way that the background soils (diameter smaller than 2 mm) had identical bulk density. The simplified evaporation method was used to determine the effective SHPs of stony soils. We used the obtained SHP data to evaluate the performance of models, which predict the effective SHPs of stony soils from SHPs of the background soil. The results highlight the systematic dependency of SHPs on volumetric content of RFs. The difference between modeled and measured SHPs was substantial for cases in which the soil contained a high amount of RFs. Accounting for the moisture content of RFs improved the prediction of the effective water retention curve of stony soils compared with a simple scaling that used only the content of RFs. Among the evaluated models for the effective hydraulic conductivity, the model based on the general effective medium theory showed the best performance, particularly for low RF contents.
Tire wear particles (TWPs) are significant contributors to microplastic pollution in the environment, yet there is limited scientific information concerning their impact on soil hydraulic properties. This study aimed to investigate the impact of TWPs at different concentrations (1, 4, 8, and 16% of the air-dried mass of packed soil samples, w/w) on the water retention curves (WRC) of southern California soils with five different textures (clay, clay loam, silt loam, sandy loam, and loamy sand). The concentrations of 8% and 16% were selected to represent extreme pollution scenarios that might occur near highway corridors. High-resolution water retention data, spanning from saturation to oven dryness, were generated using HYPROP™ and WP4C dew point meter instruments. We also developed WRC scaling equations based on the quantity of TWPs. The bulk density of the samples decreased as the TWP concentration in soils increased. The inclusion of very high concentrations of TWPs (8% and 16% w/w) led to a significant reduction in soil moisture content in the intermediate and dry ranges across various soil textures. However, at the same moisture range, adding 1% TWPs had a minimal impact on soil moisture reduction, while the influence of the 4% TWPs concentration treatment was noticeable only in loamy sand and partially in clay loam soils. Additionally, the overall plant available water decreased with increasing TWP concentrations, except for the clay soil. The texture-specific scaling models exhibited promising performance, with RMSE values ranging from 0.0061 to 0.0120 cm3 cm-3. When bulk density was included as an additional input predictor to construct a single scaling model for all textures, the RMSE increased. Nevertheless, it still indicated a good fit ranging from 0.007 to 0.024 cm3 cm-3, highlighting the suitability of simple scaling for identifying WRC in TWPs-polluted soils, particularly for practical purposes. The findings of this study can contribute to a better understanding and quantification of the impact of TWPs on soil hydrology.
The vadose zone—the variably saturated, near‐surface environment that is critical for ecosystem services such as food and water provisioning, climate regulation, and infrastructure support—faces increasing pressures from both anthropogenic and natural factors, including changing climatic conditions. A more comprehensive understanding of vadose zone processes and interactions is imperative to effectively address these challenges and safeguard water and soil resources. This review outlines selected key issues, knowledge gaps, and research opportunities across six thematic sections. Each section presents a problem statement, a summary of recent innovations, and a compilation of emerging challenges and study opportunities. The selected topics include scaling and modeling of vadose zone properties and processes, soil moisture monitoring initiatives, surface energy balance, interplay between preferential water flow paths and biogeochemical processes, interactions between fires and vadose zone dynamics, and emerging contaminants and their fate in the vadose zone. This overview is intended to serve as a compendium of vadose zone science that encompasses both insights gained from prior research and anticipated needs for the coming years.
Climate change is expected to affect the quality of soil and water, resulting in a significant impact on soil water balance in various regions around the world. Soil water potential plays a significant role in influencing evapotranspiration (ET), which is a crucial component of the soil water balance. The matric potential and the osmotic potential are the main components of the soil water potential. The osmotic potential is particularly important in dry soils, salt-affected soils, coastal lands, or when low-quality water is utilized for irrigation. Despite its importance, the impact of osmotic potential on ET has not been well-studied compared to other factors. Therefore, we conducted a study to investigate the impact of osmotic potential on ET from small-scale lab lysimeters planted with grass and equipped with scales and data loggers connected to computers. To create different osmotic potential levels, we irrigated the lysimeters with two different water qualities: distilled water and 4.79 dS.m−1 NaCl solution. The lysimeters were kept in well-watered conditions, and daily ET was monitored. Our results indicate a strong correlation between osmotic potential and ET. After three months of applying the treatments, the lysimeters with lower osmotic potential had a 39% reduction in cumulative ET compared to those irrigated with distilled water. Moreover, the osmotic stress affected plant health, leading to a notable decrease in the leaf area index and exerting a significant influence on evapotranspiration partitioning components, including transpiration and evaporation.